Open Discussions
Open discussions about the 240k.
671 topics in this forum
-
You're right, a new thread is much better idea! In the case of Oz cars there wasn't a problem with the ID as each car had the option codes on the build plate. Those determine what the car is from a legal standpoint eg ALL Ford Falcon GT's are build code JG33 for a 4dr and JG66 for a 2dr, Chrysler had E38, E49 to id engines etc The Japanese cars didn't have this level of detail in the ID plate so Freds C110 GT has the same code as Joes C110 hardtop (both are KHGC110). Thus the insistence from Federal Transport that the manufacturer ID it by description in the ADR plate. Whether there was much (or any) difference between the physical cars wasn't in question since that …
Last reply by aarc240, -
-
- 39 replies
- 4.9k views
I wanted to wait a while till I had some better shots to show you all but they may be a while longer than I thought so this is what it looks like at the moment. I feked the front guards by sanding them flat while on the bench, they look like they are from another car, the gaps between the doors and guards are 1cm apart:stupid: guess that what happens when a sales rep tries to be a panel beater. Anyway thats one for the real panel beaters to fix when it goes in for a proper spray job. If anyone has to good straight guards let me know. I'm going to register it with the std engine and interior in it as I just can't bear to have it sitting in the garage anymore. I have a un…
Last reply by 240kconvertible, -
- 15 replies
- 2.2k views
Hi guys, Been a while but it's good to see the 240K scene is alive & well. For those of who you recall my last 240K coupe (green/blue w/black bonnet), I'm glad to say it has been located just 10 klms from my house! A little background story to this car goes like this; 1. Originally I located it as a gold coupe in Wantirna, Melbourne & I didn't have money to purchase. 2. My friend (let's say Jim) bought the car minus engine, trans, etc. 3. When I went to Jims house, I asked him if he wanted to swap my 240K sedan for the coupe; he agreed & used the sedan as a rally car (still does). 4. I repaired the coupe, sprayed body & fitted motor/trans, etc &…
Last reply by minimafia, -
- 3 replies
- 1.4k views
Hi Guys, just thought i would ask here first, is anyone interested in an open R200 longnose? i am about to replace the one i have with an LSD. Not sure what the condition of it is (having never run it ) or the ratio (can check that when it is out of the car). PM me if your interested (i am in Sydney), i am only after $250 for it. it will probably take me a few weeks to get it out, so no hurry.. but pm me if you are interested
Last reply by khughes, -
- 17 replies
- 2.5k views
While searching through hybridz i came across this, http://forums.hybridz.org/showthread.php?p=918857#post918857 It seems that a chrysler 318/340/360 will bolt straight into a 240z with it's standard mounts, and I'm assuming that it would also go straight into a K. when I trial fitted my block it was very close to fitting in but I had engine mounts that were for a chrysler 6cyl crossmember not the std v8 crossmember ones (i had pulled out my 225 and dropped in the 318). It was so close, if I had seen this sooner I could have saved myself a few $ but then wouldn't have the rack & pinion. If anyone has a K they're doing up in brisbane and wants to put a V8 in it let me…
Last reply by RolfSis, -
- 19 replies
- 3.3k views
Sad times for me. Maybe your gain. This was Kent's car, then Brian's car, now it is my car (for now). They can testify to how good this car is. $6000 OBO contact: Chad mobile 818-281-9819 email: chadglass@earthlink.net Automatic transmission excellent. Car runs great. I drove it back from Arizona to Socal. I also drove it today. People look, stare, gawk, and comment on it literally everywhere I go with it. It's as if I'm driving an exotic car or something. Have replaced: front seal, oil pressure regulator, fuel filter, some hoses, radiator cap, belts, a few other things on the engine. It doesn't leak anymore. All gauges work. Car sometimes cuts out but this i…
Last reply by bonzelite, -
- 7 replies
- 2k views
I wanted to touch base with you guys. It's been quite a while since I last posted as I've been extremely busy. As most of you know, both of my Kenmerris have new homes. At the moment I am Skyline-less. I managed to get my old 510 back from the kid I sold it to 8 years ago and have managed to build up a stash of parts for it. Everything is still just sitting though as my personal and professional lives have taken center stage. I have a new job after 8 years with my last company. Surprisingly the job is back in San Diego, my hometown. I've been here in Phoenix for 2 years now and am ready to get back home. I started the new job 2 months ago and am really enjoying …
Last reply by bonzelite, -
- 10 replies
- 3.6k views
Hi On sale in Portugal, here is a very nice or may be an excellent datsun car, a Skyline 2400 GT Here goes the link http://www.cybermadeira.com/auto_usado_nissan-350_3857.html Thank You
Last reply by FilipeA, -
- 1 reply
- 1.2k views
Hi everyone.....Wondering if anyone could please help! In the middle of my 3rd K build, just got my coupe yesterday.I've been collecting parts for months now, I took my chrome strip clips, (they're the ones that hold the bonnet and the boot chrome strips on) down to the chrome platers to get them re-nickled, looks like he left them in the pickle way to long and managed to destroy the lot..3 cars worth! Does anyone have any spare clips or know who might supply them, any help would be greatly apperciated...thanks
Last reply by coupe72001, -
- 11 replies
- 7.1k views
Yeah, I know it's not a 240K, but it may be someone cheap upgrade to fuel injection http://cgi.ebay.com.au/MR30-Skyline-R30-Fastback_W0QQitemZ290256216361QQihZ019QQcategoryZ35227QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Nigel
Last reply by John Coffey, -
- 2 replies
- 1.3k views
looking for a 240k eather in the us or someone willing to ship to the us. Dont have alot of money to spend but if you got something worth the money I can get it thanks.
Last reply by bonzelite, -
- 16 replies
- 2.8k views
If you have watched "The Castle", then you know what I mean. http://cgi.ebay.com.au/DATSUN-240K-MANUAL-alloys-exhust-rare-old-skyline_W0QQitemZ130234980936QQihZ003QQcategoryZ35227QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Nigel
Last reply by bonzelite,
-
Recently Browsing 0 members
- No registered users viewing this page.
-
Popular Contributors
-
1
-
2
-
3
-
4
-
5
-
-
Mark Maras