Leaderboard

Proof I made it! This is at the judged show. I wasn't ever able to register though because I think it was full. But the zcon organizers liked the car and told me to park it on the show field anyway. Im honored!!

Well I made it! Got in late and just laid low. Had a beer with my local Z buddy from home. We met along the way for the last leg near Nashville. Man was that a long trip. But we made it!!!!!! I'm not sure which surprised me more with the success... Me, or the car!!😃

Todays event... I put a160 degree thermostat in. Didn't expect it would help anything, and it didn't. But just for completeness, I had to. So cut some gaskets from sheet with the scissors that came from the first aid kit and the hole punch borrowed from the hotel lobby desk. Haha!

@Yarb has been trying to track down an electrical problem…

When you are walking back to your car at a rest stop and see a puddle under it. Then you get close and realize it's just a condensate puddle from the AC of the guy in that spot before you. Phew!!

@Yarb Made a little progress today. I got the reverse lights fixed with the help of Yarb and my little helper was in town too. Yarb sent me a new switch he had. It's longer than the one I ordered Yarb, do you know the part number for that switch?

Im in good company!!

Changed out fuel filters from 2015 when I did all the work on my 240. Anyone that may be on the fence about Red-Kote fuel tank liner, done the right way it's fantastic from what these filters show or don't show. Heres the G2 right out of the tank. It looked great besides being 10 years old. Fuel came out clear to as I drained out about a gallon before my dumbasss realized the hose on the tank had to be clamped off. Lawnmower gas.😊 I haven't fooled with mine since a knee surgery sidelined me but after @Captain Obvious's heroic adventure got me fired up enough to at least do something. If that beer guzzling rascal can do what he did, ain't nobody got an excuse.😂

Thanks for the continued support guys! The car has a total of 71000 miles. And looking at the condition, it's a true 71000. So it's typical sketchy details when buying something like this used, but it appears the odometer has not rolled over. And of those miles, I've put about 1400 of them on since I got the car on the road. 400 before departing for Nashville, and about 1000 to got here.

On the south side of Knoxville. Letting him cool off for a little bit. Anyone from the forum there who would like to have a beer with a weary traveler tonight?

I'm in Christiansburg, VA. About halfway to Nashville. Travel has been OK. Only problem with the OG is the temps keep creeping up. The radiator needs work. It's right at the borderline at about 65 mph. If I try to run above that, the radiator runs out of compliance and the temps creep up. So I'm finding that I have to keep the speed between 60 and 65. Not ideal, but considering this car hasn't seen the road in 45 years, it's doing great. More news as it develops.

Of course I think of you every time I wear that shirt. Wish you could have made it to the show. Miss the opportunity to share a beer with you!

I got no words... This is right now. Couldn't be more appropriate.

I reckon that they saw the PA license plates and determined that if you were crazy enough to drive it down to Nashville, your car deserved to be seen with the rest of the cars.

I messed with the radiator hoses today and had some of the same issues I had before. Here's the lower rad hose: \ And here's an example of how unattached the braid sheath is to the rubber underneath: And this happens when you slip the hose clamp over the end: And here's an example of the inconsistent braid density that I mentioned earlier. Most prevalent on the outsides of bends, which makes sense. Some areas are so sparse that there is big gaps in the braiding. Looks like this: Compare this to the original stock stuff: I know you can't get the stock stuff anymore, which is why you end up paying "only game in town prices", but still... This is what it says in the description: "All of our braided rubber hoses are very accurate replicas of the factory braided style hoses, they have been carefully molded to have the exact curves and bends like the originals!" Maybe they had a bad batch where there were quality issues. I just don't have the time to deal with it now. Maybe after Zcon. I also see in the ad that there is a warranty. I'm going to look into this when I have some time to breath: "We are confident in the quality and craftsmanship of our products, as a result we cover all of our products with our Resurrected Classics Parts Promise. This is a Lifetime Warranty that covers any manufacturing defects with your product during your ownership and entitles you to a new replacement of that part with free shipping. This warranty does not cover damage due to improper installation/handling, accidents, or improper modification. This limited warranty does not cover incidental, consequential, indirect, or special damages."

Well, I'm out of work time. In theory, I hit the road tomorrow morning. So whatever isn't done, isn't done. I got wipers on. Really don't want to be in a situation where I use them, but they're on there: Hope to see lots of you in Nashville. Assuming my radiator and my back hold together well enough to get there!!

I have some OEM, two used and one NOS.

Sometimes the journey is more rewarding that the show, congrats on all your efforts to make it to the event! Let's see what it can do on the track.

I would. But it will take me 35+ hours to get there. If I leave immediately. And break the speed limit.

You can download the Factory Service Manual for every year of Z car at nicoclub.com ( https://www.nicoclub.com/datsun-service-manuals ) Coil specs: Engine Electrical EE-26. Electrical Schematic: Body Electrical BE-5 I described the wiring for the tach operation above but: The coil gets battery voltage at Ignition ON through a Black/White wire. Black/White is a Nissan standard throughout the Z cars of the 70's for "battery voltage (or whatever the alternator delivers) when the ignition switch is in the ON position. NEVER assume a Black/White wire in a Datsun has anything to do with GROUND - IT DOESN'T! BUT - the 240Z Tach works on amp draw. SO, the tach needs the B/W that powers the coil to run through it (the tach) FIRST (before it feeds the coil). A ballast resistor was common for ALL single coil distributor engines of that era. Nissan designed the circuit so that power to the coil when through the BALLAST before the tach and coil. That's why the wiring is a bit confusing. IN THE STOCK CONFIGURATION, There are three (3) wires that make this happen: TWO Black/White (B/W) wires and ONE Green/White (G/W) wire that are in the harness bundle that pass in front of the radiator core support and then through a hole in the left side and end up in the coil area. (The coil and the ballast resistor are side-by-side) IF all three of those wires are temporarily disconnected. ONLY ONE of those two B/W wires will have power at IGN ON. Stock config: The B/W with battery voltage would attach to one side of the BALLAST. The Green/White (G/W) would attach to the OTHER SIDE of the BALLAST. The G/W returns to the TACH. From the Tach, the SECOND Black/White (B/W) RETURNS to the COIL "+" terminal. (IF you were eliminating the ballast for some reason, the B/W with power should attach to the G/W so it feeds the tach before sending power to the coil through the second B/W...) THUS: B/W from IGN Switch -> BALLAST -> G/W back to TACH -> B/W to "+" side of COIL...

Sorry, that is positive earth smoke. It won't work on our negative earth cars.

Thanks for the reply and it does make sense. Maybe I'll see if I can find another tach or a replacement smoke kit. Hopefully Lucas parts would be compatible with our Z cars!

Update from the Good Captain: He called me from Bristol, VA. He's making good progress, and the car is holding together, though he is still concerned about the cooling capacity of his radiator. I told him to run the heat, too, but he declined. (Obscure reference: Watch Gumball Rally when the Camaro is running hot.) He expects to hit NashVegas this evening.

Texted you...does you phone do texts? 🤣

So I considered registering the OG for the judged show just for entertainment value*. But I could not figure out how. I could not see any option to attend. Is that show full and they aren't accepting any more entrants? Anybody have a phone number for someone on the org committee? My electronic footprint is low while I travel, but I can text. *Him - "Dude, your car looks like asss, why are you here?" Me - Yeah, your car is beautiful, but I can see 1000 things that aren't original. And I drove mine almost 1000 miles to get here.

Hi, I did some work refreshing for metal headlight bowl case of my Z432. In Japan, headlights case has a note “右配光” (Aiming to the right) and “L o R.” Is that its lens cut different? I have a new set of the light bowl but I don’t want to use it because new replacements from Nissan has different shape of the plastic screw cover.Original is also a see through plastic but new one is white. So I cleaned it and painted it with hand written “右配光 R(L)” “12V” Please note earlier type doesn’t have tiny holes for retaining the rubber seal to the metal bowl. Kats

So how bad do you want your turn signals working? Hahahaha!!!! ☺️

Went on my first road trip of the year with my BC Z club friends. About a dozen of us left from the Vancouver area, I joined from Chilliwack and we made our way to the BC Okanagan. Our original plan was to take the Coquihalla Highway to Kelowna, but a large sinkhole closed that route. We ended up taking the more scenic Hope-Princton Highway. For me it was a 436 mile (700km) return trip. My1970 Zed performed flawlessly, even in high mountain terrain and temperatures in the mid 30's C, (93 F), Our first stop was in Princton, for fuel, and to meet up with a few more Z club members. Here's a pic of a few of us in Princton. Our end destination was Kelowna, where Kelowna Nissan generously us hosted for a welcome event. They put on a great BBQ and offered up some Nissan swag. With other club members that met up with us along the way, there was close to twenty Zeds. The Zed to the left of me is fellow forum member @Chickenman, with his 1976 280Z. Thanks Richard, for the "way home" route ideas. The next morning, quite a few had decided to stay an extra day and enjoy the awesome wineries in the surrounding area. I and others, make the trek back, with most taking the faster, more direct Coquihalla route, as sink hole repairs had been made. I like to take the road less travelled, so I did a solo drive on a longer but more scenic route. This route included highway 5A from Merritt to Princton, that runs beside a seemingly endless series of beautiful lakes. Another bonus was that I was almost the only car on the road, with that route. 🙂 All in all, it was a great weekend. I'm looking forward to the next road trip.😎

Have you read datsungarage p79 modification? You shave 80 off, shim cam towers 80 higher and use the valves from the N head. https://datsunzgarage.us/p79/

I do, I ordered another from Nissan to replace mine. When I get back in town from Boston, I’ll post the p/n. Can’t remember if it was superseded.

Provide some details about the car. Is it a California car with a converter or is it a Federal car without? There will be a sticker on the door jamb that says Catalyst or No Catalyst. I found the patent describing the concept. If the system follows the patent there will be some hardware attached to the air intake system after the AFM. Attached below. If it was mine I would disconnect it and get the wiring back to factory stock in order to simplify things until you get the engine started. There are numerous reasons that it might not be starting. Start with the basics - power to the coil, spark, tach signal, etc. Download the 1980 EFI book and do the electrical tests. Try starting fluid if you have spark. Make sure the fuel pump is working, etc... I'd also start a separate thread where everything you try is contained. Sometimes people start multiple threads and you can't tell what's been done. It can take a while to get things right after an EFI car has sat. https://patents.google.com/patent/US5163412A/en "Pollution control system for older vehiclesAbstractA pollution or emission control system for retrofitting on older vehicle engines includes a catalytic converter with an in-built oxygen sensor for mounting in the exhaust line, and a supplemental air input line containing a control valve for connection to the engine intake manifold to control the amount of air supplied to the engine. A computer monitors the oxygen sensor output and the engine speed, and controls opening and closing of the control valve according to the detected conditions. The computer also controls the speed at which the valve is opened or closed dependent on the engine speed and optionally the engine temperature, so that the valve can be closed faster at slower engine speeds and opened faster at higher engine speed. The computer is additionally capable of producing diagnostic telemetry, both digital and analog, to assist installation of the invention and test for proper operation once installed."

What do you think @Mark Maras , Raisin Bran or Chex?

I can’t believe you chose this frivolous job over installing that fancy hatch vent you recently acquired 😁. Can’t wait to check at your car at the show tomorrow.

They look better wet.😁 Mine has water allergies though. Now for some windshield time.

Grab another tach off eBay and go from there.

Couldn't help you with that, but I doubt either part would keep the tach from operating if it's wired properly (the tach and coil) . And if it's running - and running well - why would you think there might be an issue between the MSD coil and Pertronix module? The distributor module (Pertronix, points, 280ZX "matchbox", whatever) gathers info from the crankshaft and sends a "signal" for the coil to fire. It momentarily asserts a Ground on the coil "-" terminal. The rotor "distributes" the released coil energy to the various spark plugs at the appropriate time. If any of that isn't working properly there would be no well running engine.

Bruce, how many miles have you driven now as i got no idea, a 1000? In my country you can't drive 350 km, you run out of land! :-) Mart.(in)

Great Job Bruce!!!

I was finishing up a week away from work in one of the best ways I could: attending yet another car meet. I was expecting to be about the only one with a Z there today since ZCON is starting up just a few hours away. Boy was I surprised. Several friends showed up in their Zs, too. One new friend showed up a little late, too, with his 280Z.

It sounds like the tach itself. From your description I would imagine there's a part inside that let the smoke out. I doubt the coil itself is going to have that effect. Perhaps removing the ballast had a role, perhaps not. Like Yarb said, maybe it's just old. There are discrete parts in there and perhaps the culprit could be found and replaced. The tach is just reporting entity and has no physical connection to the engine or coil. There is a battery positive and ground for power, but the "signal" is isolated - that wire is not physically attached to any part of the gauge. If you look at the back you'll see the G/W feeds a looped wire that goes through the same sort of device that a "clamp meter" (ammeter, amp probe, or the clamp that goes over the spark plug wire on a new-fangled timing light) has.

I can see from your pic the fun that the body man is gonna have with the lower fender and rocker and/or dogleg... Completely typical though.

So today is my last work day before I leave. One day left. Then a two day journey to get there. Flush my cooling system one last time and hope for the best. Check the valve lash. Balance the carbs. I was going to change the oil, but I've only got about 400 miles on it and it's really not even time yet. Anyone near Christiansburg, VA that wants to help me change my oil tomorrow evening? Hahahaha!!

Installed the freshly restored seats in the orange 72

Horror House on Highway Five (1985)

What a fantastic shot! That could be a poster.

Missed 2 car shows yesterday because of rain but made up for it today as did others. A lot of classics out around here on a beautiful day. Car ran great! Here's to the rest of the day fellows, it's drinking time, all driving is over. 🍻

Went to Cars & Coffee in Steveston BC this morning, and met up with about a dozen members of the local Zed club I belong to. It was110 km from my house, so it was a great drive too. After the cars & coffee we did a scenic group drive for breakfast to a local Pub for the $5.99 special. Lol. Sadly this the last weekend they will be open, as they are closing after 130 years of service. Sometimes "progress" sucks, the Buck & Ear will be missed. On the way home I also stopped at my favorite, close to me, craft brewery. For some reason I was attracted to this six pack? I think this Dutch Pale Ale is my new go to beer. Lol. And it tastes good too.

Go to the Nissan museum wherever it is. All I have seen were the pictures and it's fantastic. Kats is a pilot so he's probably pretty busy but maybe...? Have fun and try not to spend all your money in the dirty panties vending machines. That's what I'd do.

I figured I would let the cat out of the bag. From September 2020 at the unveiling, I thought that Nissan finally designed a Z I would want to buy new. I was too young to buy an S30 or S310 new. I was young and broke when the Z31 and Z32 came out, and I never was really taken by the Z33 or Z34. Yes, the RZ34 is a Z34 with a new wrapper, but I really liked the heritage touches. To me it looks more like a GT car and less boy racer. When I talked to a couple of Nissan people during the pre-sales road shows, they confirmed New Sight Orange would be coming. The first Z I remember was a 260Z in New Sight Orange. It was owned by a former NASA test pilot, and I lived down the street from him. A friend's father bought the car and got it back on the road. My friend got to enjoy it for a few years before the car was hit by an uninsured motorist. My first Z, a 73 was originally New Sight Orange, though someone with questionable taste had it repainted a color similar to Metallic Gold, though it looked worse than a MAACO paint job. I still have that car and hope to return it to New Sight Orange some day. I was excited to hear that Nissan was holding to its word that orange was coming back, but my excitement diminished when I learned it was on the Heritage Edition only with a sticker of $62K (plus whatever the dealers think they can charge for a special edition). So I set about looking for an alternative. I noticed that dealers were finally coming off sticker price for the Z. On the other hand most of those Zs were Gun Metallic. While I don't worry too much about color, I didn't really want grey. No blue Zs with manuals were popping up nearby, but finally a Z in Sport trim showed up at one of the closest dealers sporting Ikazuchi Yellow Pearl paint. I took it for a test drive, and the wife loved it. It felt right for my new daily driver, so a couple of hours later I drove it home. The new Z has very good acceleration as one would expect with 400HP on tap. The steering feels extremely light at low speeds, but the feel improves as speed increased. With no limited slip, it's easy to spin the tire a little getting into traffic. The seats are comfortable, and the shifter is in easy reach. The clutch engages higher than I think it should, but I am just going to live with that. The blind spots are huge, but the blind spot warning system seems to work well. The view out the rear window is small, too. I have an Android phone, so one of the USB slots is taken by the phone if I want to use navigation. If you want more creature comforts, or if you are planning on tracking the car, go for the Performance trim. The yellow pearl paint stands out, but it doesn't look like a taxi, even with the black roof. I have experienced one problem with the car so far. Yesterday, the TPMS monitoring system lost communications with all 4 tires. I drove the car around for a while, and the system found the left front, though that didn't last. I guess I'll see how good the local service department is.