Body & Paint
Discussions about bodywork and painting a Zcar.
3,641 topics in this forum
-
- 9 followers
- 16 replies
- 2k views
Has anyone had and success with polishing the pits and scratches (left by wiper blades) away? I believe I have a original windshield that would be worth trying this to. Sent from my iPhone using Classic Zcar Club mobile
Last reply by psdenno, -
-
- 3 followers
- 5 replies
- 696 views
I've installed a dozen or so windshields between 510's and Z's in the last few years, I find it pretty easy now. But today I'm about to do it again (510), and something popped into my head. There is, after all a fairly big vacuum in there that allows things to slip in pretty easily.. Why not put the gasket in the car over the pinch weld FIRST, THEN put the glass in the gasket. Put the rope in the glass channel rather than the pinch weld channel and pull it over the glass? Any one else try this before? What madness makes me think this might be a tad easier since your pulling rope on the outside rather than cramped in the car, and I can push down with one ha…
Last reply by dutchzcarguy, -
- 4 followers
- 8 replies
- 1.2k views
Many of us have learned to replace windshields ourselves. This thread is not so much a tutorial on the whole process, there are great threads for that else where. I just to add a method that will make the generally accepted technique of using a rope in the pinch weld groove to pull the inner lip over the pinch weld, into an actual pleasant experience rather than a test of will and strength. Here we go. Just tried this today on a 510 rear windshield after a common struggle with the front. The experience on the back was heavenly.
Last reply by cgsheen1, -
- 2 followers
- 4 replies
- 2.8k views
Hi I have made a deal for a car pending final inspection. Its a 260z that the owner used to drive and autocross. I am wondering what to check for that could be broken from autocrossing. I know the front swaybar mount needs fixed but that seems to be very common. The car has an L28 with triple webbers and header, performance springs, swaybars, bushings etc. It also still has the air and heater hooked up and the inside is not to bad but I have all the pieces to make it look perfect I think. Any way excited to get the car but want to make sure to know what damage to look for besides rust.
Last reply by Yarb, -
- 1 follower
- 4 replies
- 652 views
The rubber parts on my bumpers are still in pretty good shape (not cracked) but faded as you would expect. any suggestions on good rubber refresh products or methods? Thanks for any help.
Last reply by swflaz, -
- 5 followers
- 7 replies
- 680 views
Prepping my car for paint and finding lots of holes in the sheet metal that was used as something for the bondo to “grab” onto. From what I read, this is not an ideal repair. That said, the bodywork did look ok with no apparent cracking. So the question is, leave the holes alone and simply bondo over them, or weld them all shut? Lastly, if I do weld them all shut, will the bondo have anything to “grab” onto? Thanks in advance. Sent from my iPhone using Tapatalk
Last reply by kcpope, -
- 4 followers
- 7 replies
- 1.3k views
Just wanted to show some of the work I've been doing on my Z to fix some thoroughly rusted floorpans and rockers. It is still very much in-progress but I'll try to update as it goes on. Hopefully it'll be of help to someone as a reference, or at least encourage folks to give it a shot. If you see anything wrong with the approach, please let me know! Some quick background: The car is a '75 that I picked up in KY a few years back. Since then I fixed the fuel system and got it running, squared away the suspension (new bushings, shocks, springs, hubs, etc etc). But that is where my skill set ran out; never welded and never done resto work. Kept trying to find a sh…
Last reply by Neb, -
- 2 followers
- 4 replies
- 777 views
This is an old topic, but not satisfactorily answered. I am trying to install new Front Door Seals I received from ZCarSource. These look much different from the MSA seals that were on there, and of course I can't remember what the original factory seals looked like. Here is a photo of the front of door, and of the seal layed on top for reference. I found some photos here (https://www.classiczcars.com/forums/topic/39768-front-door-seal-pics/?do=findComment&comment=357725) from 11 years ago. The replies conflicted - some said the rubber tabs tuck under, and others said they're glued on top. Also, the smaller rubber seal that I show encircled in …
Last reply by Roberts280Z, -
- 4 followers
- 4 replies
- 763 views
I have had a problem with exhaust getting into the cabin of my 240 HLS30 28726. I used a theatre fog machine to find where it was coming in, and found minor leaks around the right tail light, the license plate light and the antenna. Got them all fixed. The remaining problem, and the biggest, is the hatch seal. While the hatch itself is a good fit and well aligned, I'm getting leaks on both sides, but not the top or bottom. The seal itself is only a few years old and has very few miles. The material remains malleable. I believe I got it from the now-defunct Black Dragon Automotive. Can anyone tell me if there varying quality seals out there? Any to avoid, o…
Last reply by SteveJ, -
- 1 follower
- 3 replies
- 609 views
My friend is looking for some headlight access panels, Are the 1978 panels the same as the 1975 parts ? I found a used set from a 1978 280Z 2+2 ???? Thank you !
Last reply by cgsheen1, -
- 4 followers
- 9 replies
- 806 views
When I disassembled my doors, I just ripped all the plastic sheeting away, and assumed the FSM would help me with reinstallation photos. The FSM only makes mention of a 'water seal screen', with no diagrams or photos. The parts suppliers don't seem to offer any replacements. If it's just mylar sheeting, I can cut that out myself if I know what size it should be and where it should go. My doors also had individual thicker plastic covers over the individual inner door openings. It's possible that I added those myself, but I don't think so. Thanks in advance...Robert
Last reply by cgsheen1, -
- 5 followers
- 8 replies
- 873 views
I have seen lot of posts here....many seem to say all car covers can scratch or damage car paint.... I have to move my car by trailer. Cant seem to get a covered car hauler.... So i am wondering if there are any car covers that might prove useful while transporting a car?
Last reply by Richard McDonel,
-
Recently Browsing 0 members
- No registered users viewing this page.