Topics Last 30 Days

Maybe that would have been better off on another post. Totally threw off where to get an NOS or comparable fan. Difficult sometimes to understand what the post was about originally unless you begin at the beginning. I hope you understand what I’m trying to say. Thanks

So I've been working on struts. Had a hard time getting the second one apart. Strut shaft kept turning in the "D" shaped hole. Got it apart and found this: Hoping I can dot a couple weld lumps in there to mitigate that issue. More news as it develops.

I've been maintaining a wiring diagram for the early cars. It's currently version 8, and you can find a copy here: https://www.classiczcars.com/forums/topic/69026-1970-wiring-diagram/page/7/?&_rid=23457#findComment-676548 It's not large or laminated, but it's accurate.

With the additional pics, I stand by the assessment that it's a Fall 1970 car with a rolled over odometer. It'a no "survivor" requiring a minor wash and buff. It's got all the wear and modifications and aftermarket parts that are typical with such a car. Oh, and a poorly applied re-paint. The annoying part is that the seller knows that some of the major claims in his listing are false. And he hasn't changed it. I do think, however, if he cleaned it all up and took copious good quality pictures, it would do better. As it sits, I don't think it's going to sell. And I think the seller knows it. I think at this point, it has become a test. Just to see what happens. If I didn't know better and bought that car, and then found this thread later?? Man, I'd be upset.

Thanks Ernest, I have the large laminated wiring diagram. Makes tracing much easier

Independent…

Thanks for the tip. That's the one I'll go with. Richard McDonel

So just a little progress of working on my 1972 240Z that I’ve resurrected twice now since I’ve owned it from 2005 or so ..it’s been a long project and not perfect but it was my daily driver . This is where it sat for 8 years untouched next to my 1988 Toyota pickup in December 2024 All loaded up for the 1500 mile return trip in my 1986 f350 diesel I pulled from a field for 500 bucks a year earlier Once I got it home I got it running pretty easy but noticed an immediate problem in the form a rattling noise from the timing cover to discover a broken tensioner and missing bolts . After that issue was fixed I decided it was time to install my big brake kit I got from a junk yard 260z about 15 years ago .. don’t know who made the brackets but the calipers and rotors are from a 90’s corvette .. 12 inch rotors too ..don’t worry about the wheel studs they have been replaced since It also needed the carbs tuned As you can see they were way off plus I discoved the carbs were loose too ..explained why the erratic idle lol I just had to get a star road shift knob Radio was full or rodent crap and figured why not add a wide band afr gauge from auto meter in its place along with my driving light switch ..I still haven’t cleaned the marker off Also had to make my own headlight relay upgrade to run flosser h4 90/100watt ralley lights It’s an L28 with N47 head from a 1979 280ZX upgrades include 45dcoe triple Webbers . Msa 3 into 2 headers msa stage 3 schneider cam along with schneider valve springs Holley blue fuel pump . Kameari Racing distributor and fidanza light flywheel with centerforce clutch . Also running a single grove dampener . I will get the engine rebuilt in the future and get it up to 10.1 cr so maybe I’d get more out of the mods I have ..but still runs great and sounds amazing .

The writer's version. People have their unique talents. Three Dog Night made it work.

Good information. Thanks for the followup. There was none, now there is some. Well done.

As of this date it is NLA from Nissan !

Facebook marketplace $100. https://www.facebook.com/marketplace/item/1265446158557795/?ref=browse_tab&referral_code=marketplace_general&referral_story_type=general&tracking=%7B%22qid%22%3A%22-8463486491996509719%22%2C%22mf_story_key%22%3A%224732611337300919667%22%2C%22top_level_post_id%22%3A%224732611337300919667%22%2C%22commerce_rank_obj%22%3A%22%7B%5C%22target_id%5C%22%3A4732611337300919667%2C%5C%22target_type%5C%22%3A6%2C%5C%22primary_position%5C%22%3A78%2C%5C%22ranking_signature%5C%22%3A8680157257122688039%2C%5C%22commerce_channel%5C%22%3A501%2C%5C%22value%5C%22%3A0.00097449886189893%2C%5C%22upsell_type%5C%22%3A3523%2C%5C%22candidate_retrieval_source_map%5C%22%3A%7B%5C%2225209201332002879%5C%22%3A626%2C%5C%2225037753125825021%5C%22%3A626%7D%2C%5C%22grouping_info%5C%22%3Anull%7D%22%2C%22lightning_feed_qid%22%3A%22-8463536038638864453%22%2C%22lightning_feed_ranking_signature%22%3A%228680157257122688039%22%7D

Does it not catch onto the threads, one side of the notch isn't turned up a little? I don't understand any other reason for it.

http://www.zcarblog.com/wp-content/uploads/2025/08/477795897_1011115091063663_8033328159812275787_n.jpg Our Z Car Garage KW V3 Suspension is available in limited quantities. These coil-overs offer game-changing performance suitable for street, track and daily-driving for your S30 Datsun Z car. http://www.zcarblog.com/wp-content/uploads/2025/08/IMG_6502.jpg http://www.zcarblog.com/wp-content/uploads/2025/08/481184467_1024485623059943_4520335096885803442_n.jpghttp://www.zcarblog.com/wp-content/uploads/2025/08/480235492_1011115124396993_2250652587135409969_n.jpg http://www.zcarblog.com/wp-content/uploads/2025/08/IMG_8079.jpg View the suspension installed on Sung Kang’s RB26DETT-powered Datsun 240Z, Larry Chen’s SR20DET-Powered Datsun 240Z, James’ turbocharged L-series powered Datsun 240Z, Mrs. Butters, our Series 1 shop 240z and more client cars in the photos below. For more information on ordering and pricing please contact RobATzcargarage.com. Christopher’s 1977 Datsun 280Z http://www.zcarblog.com/wp-content/uploads/2025/03/IMG_0100.jpghttp://www.zcarblog.com/wp-content/uploads/2025/04/79132B3E-9580-4354-8193-A495343542AA.jpg http://www.zcarblog.com/wp-content/uploads/2024/04/Snapinsta.app_435453951_1100584987877003_6251338209217300970_n_1080.jpg Rashid’s Datsun 240Z http://www.zcarblog.com/wp-content/uploads/2023/12/IMG_3644-1024x768.jpeghttp://www.zcarblog.com/wp-content/uploads/2023/12/IMG_3668-1024x768.jpeg http://www.zcarblog.com/wp-content/uploads/2023/12/IMG_3660-768x1024.jpeg Larry Chen’s SR20DET-Powered Datsun 240Z http://www.zcarblog.com/wp-content/uploads/2025/08/482238822_1031449779030194_8541949018636167241_n.jpg David’s Datsun 240Z http://www.zcarblog.com/wp-content/uploads/2023/12/IMG_3914-768x1024.jpeg http://www.zcarblog.com/wp-content/uploads/2023/12/IMG_3658-1024x768.jpeg Sung Kang’s RB26DETT-powered Datsun 240Z http://www.zcarblog.com/wp-content/uploads/2023/04/230321attctn01_AD4I1590-1024x683-1.jpeghttp://www.zcarblog.com/wp-content/uploads/2021/10/IMG_6847-768x1024.jpeg http://www.zcarblog.com/wp-content/uploads/2025/08/489963857_10161147860356524_8556000592169917657_n-scaled.jpg Rick’s BRE-240Z inspired track car http://www.zcarblog.com/wp-content/uploads/2022/12/320600770_1009589563765747_4277675222190800456_n-1024x892.jpeghttp://www.zcarblog.com/wp-content/uploads/2025/08/IMG_7934.jpg http://www.zcarblog.com/wp-content/uploads/2025/08/IMG_7942.jpg Yoni’s Datsun 240Z http://www.zcarblog.com/wp-content/uploads/2025/08/482246435_1031972718977900_6077886151500554509_n.jpg James’ turbocharged L-series powered Datsun 240Z http://www.zcarblog.com/wp-content/uploads/2022/03/IMG_6794-1024x768.jpeg Mrs. Butters, our Series 1 shop 240z http://www.zcarblog.com/wp-content/uploads/2024/12/468610894_1296792398175930_6743499117304711_n.jpg http://www.zcarblog.com/wp-content/uploads/2025/08/508182070_10161384649461524_7603414350984985404_n.jpg View the full article

Thank you

Hi, I'm looking for a nice hood for my '72 Z. Anybody got a nice one for sale? I'm located in Seattle, WA. Thanks!! JH

Ahh. This is interesting & helpful. My tip is closer to the red (stock) above. And my corner (1 of them ) is closer to the red one too, although I'm uncovering atleast 1/8 inch of bondo (see pic) Question #2: Does anyone have any info/experience related to the remanufactured steel hoods available on ebay, etc? I see that they're going for anywhere from $800-ish to $1200-ish. I'm considering that as option. Any thoughts, advice, etc? Thnx! JH

Thanks for sharing! I don't watch much TV, so when Diane told me there was a Nissan ad with what looked like a yellow version of my 240, I had to check. Cool ad, although there will be those among us who find the rubber-burning, wheel-spinning parts to be "deeply offensive," to which I say, "suck it up baby sisters."

That makes sense, but the problem is really just cosmetic (once I've confirmed that the exhaust problem has been corrected), so I don't think I want to go as far as adding a second strut to correct it. I don't think all cars with the single strut have raised driver side hatches, though, so I'm thinking that there are other ways to address this. If the hinges are worn, that might be a place to start, or maybe the two hinges just need to be adjusted relative to each other to lower the driver's side? At this point I haven't glued the seals back in or attempted to adjust the hinges or latch, so I think I'll move ahead with those steps and see how close I can get things to flush. The upper portion of the new inner seal is almost vertical when installed. When the hatch is closed the vertical portion slides outward against the underside of the hatch to create the seal, so I expect it to compress a little over time as well. As an aside, I was happy to see that, with a couple of careful initial closings where I manipulated the seal at the hinges, the seal is sliding over them properly. Both my original seal and the replacement were mangled by the hinges. I've been procrastinating on the next steps because I know I'm not going to enjoy removing the adhesive from the car before gluing the new seal in, but I'll report back when I've made progress.

If you do one at the time you have a (mirrored) example there to see how it sits/comes together again.. and... ALWAYS make pictures BEFORE taking apart.. it's so easy to miss that sequence of the little rings/parts on there! RULE NUMBER ONE: MAKE PICTURES OF EVERYTHING YOUR GONNA RESTORE!

The first versions were (as far as i know) never sold officially, but only delivered for testing as prototypes. Some ended up in private ownership. but i guess those were very few. The upgraded suspension, front and rear spoilers, 5-speed transmission and the different front turn signals, etc were standard equipment on all european cars. Even though the parts catalogue lists things as optional, as far as i know, most (all?) european Datsun importers didn't sell any dealership options and most cars were sold as standard european final spec cars. Aside from Portugal, of course, which had their own specifications.

I think it can be unbolted with the fenders on. just enough room with a swivel, a bent wrench, some friends and a 6 pack. lol The backing plates can be retrieved if they fall, use a stick magnet, you might have to remove the ECU, Holding them in place while starting the bolts is another circus act. get some friends back over and a 12 pack. haha!!

@MH77280Z has done this on a 280 if I remember correctly. May be of some help to you. After seeing what you did to your older garage, I'm a little claustrophobic and it made me cringe, I am so happy for you and your new space. 🙂

IRON CROSS WHEELS SOLD.

280ZX TURBO engine SOLD.