Topics Last 30 Days

😔

🤓

I also made a set of battery cables and swapped out the ratchet strap hold-down for something a little more appropriate. I know it loses some of that road-kill character, but it's much cleaner now. Here's what I started with: And here's what I got now: And I included the ground wire directly from the battery to the firewall now. Didn't have this before:

I reported the post above, but still not sure the report function is working. There are other bots I've reported that are not yet nuked so I'm not sure if I'm doing this right.

I think that adhesive is the only way forward. However, you could always try it first without glue and see whether it can adopt to all of the door contours and then stay in position... especially in the areas of tightest bends. I'm pretty sure that it won't.

There's so much religion and hearsay around motor oils that I usually don't pay much attention. But I'm glad I watched that video. Guy actually applied science, credible documentable references, and theory*. I'm glad I watched that one. * Not just "Last year, my cousins boyfriend put <oil brand> into his small block and it wiped his cam. And stuff"

Yes, that plastic piece is a travel stop, and you should really have one in there. If that stop is missing, the lever travel could be too much and the rear adjustment system may not work properly.

20251008_144110.mp4 We cobbled up some wiring and tested the tach. Now we have to figure out how to integrate it. Most 510's didn't have tachometers

It's former greenness is "clear" now. Seller posted a before picture.

I'm working on a knowledge post about the S30's automatic transmissions, and for that, I tried to update my document collection. Since I don't have any Auto transmission and don't plant to install one ever, it was obviously never a priority. So recently a few things arrived again from all over the world. Some of them are pretty cool and rare: First, a set of original Nissan Japan 3N71B Auto transmission service manuals from 1971 and 1973. They're not specific to this car, but they have some good general information about that specific transmission. I also got the English version of the earlier 3N71A transmission manual. This time specific for the 240Z. Nothing crazy inside, but good for some reference data if you're a nerd like me. Speaking of Automatic transmissions. I got this cool troubleshooting guide slider, which was issued for both the A and B transmissions by Nissan USA in 1972: The delivery also included some Mikuni triple carb-setup parts: And i also came across this Mikuni PH level gauge for 2 bucks, so I had to get it: It even came with a nice little operation manual leaflet and padded pouch: Then I also got this nice booklet called "Z-car" by driver magazine JP. It's basically a collection of all their S30-related publications from their monthly magazine. I still have to read through all of it, but so far it has some very nice stories, including the original designers of the car. The only downside so far is the overload of praise for Mr. K as the sole man behind the Z, which is of course nonsense. But as said, i only read two pages so far. Speaking of documents. I made a copy of that original Nissalco 240Z special service toolbox manual, as it was falling apart. And I have to say it turned out pretty good for my first attempt at something like this. I picked up a load of tool-related things yesterday and have a lot of pending orders. so stay tuned for another update soon.

BTW.. if you really want to put some fuel into a tank of anything/any machine, i use the fuel for 2 and 4 cycle engines used in gardening machines.. they stay good a long time, are more expensive but work the best and keep things not getting clogged up with varnish! The fuel out of the tank i put in the car that i'm driving at that time. (Often the 240z as it's used round the clock and also can run on bad fuel or old fuel.. i always say if i pee in the tank he will probably drive on that as well! 🤣 )

Didn't mean to contradict you directly. There might have been something in the fuel that was left behind as a solid. Crystalline and solid are two separate things in the materials world. A solid can be crystalline but it doesn't have to be. Who knows, it might have been residual fuel stabilizer, left behind when the gasoline evaporated. Most of them are a witch's brew of chemicals designed to save the metals and the fuel. I took some chemistry courses! 🤢 https://www.lucasoil.com/pdf/SDS_Lucas-Fuel-Stabilizer.pdf https://defender.com/assets/pdf/sta-bil/safety_data_sheet_302110.pdf

If you need headlight buckets, I have a few.

But why do you expect to see detailed photos of a commercial, industrial process over and above the few PR photos that Nissan chose to show us? They gave us plenty of information about the product itself and a fair bit of information about the company and its various operations. As far as Nissan are concerned, anything more than that is really none of our business.

Possibly change the system to a higher resistance coil? And get rid of one or both ballasts. Just a thought

Interested -- if the price is manageable.

Looks like it still has an engine. Says it's a turbo. Row521982 Datsun 280ZX at PICK-n-PULL Portland South JN1CZ04S1CX623964

My factory floor covers the groove and its filled with black goo

Would have loved to go for a ride when we were at Zcon. If I had been feeling better we could have changed a radiator and then gone for a rip!

You meant N47 =MN47

What a clever little piece! Never heard of that either

There are some clips that go on the cowl to protect the body. Similar to the 240z but a different part number. Can't even find a picture of those datsun 66312-A4900 A good glovebox A dome light for the cargo area of the wagon. They are different than the center domelight. I know I saw one for sale somewhere not that long ago but can't find it now Thanks, Charles

Working on PCV again, I am going to try for the exhaust. My basic plan is, valve cover to stock pcv valve, to a catch can, then block to the catch can, catch can to the exhaust.

Just incase you know anyone interested :) Something a bit different- a competition to win a 240z reprodution bundle. Win the bundle- £5 ticket. Enter Raffle to Win Datsun 240z series 1 reproduction bun...Reproduction fuse cover/ash tray for the 240z Datsun Series 1. Comes with asa silver ring insert, lid pins and a stainless steel snuffer plate. *not to be used with hot embers & Datsun 240z series 1

The new flahers fixed the issue. We also connected the brake lights up so the JDM rear taillights are all connected and work properly