Yarb

Sad Very Sad!

Chas is the Man!!

These cars require a tremendous amount of time and research to find the available suppliers. That’s the biggest battle.

Take the p/n, search for it and dig around. You will find specs.

CarPartsManual.com is a good place to start.

No worries it’s all good. We all want to see another Z back on the road including mine.

I can’t testify other than what the seller is saying. Rob needs Bosch boots and that’s what I was able to find. Not sure what the issue is. Trying to help a friend out and just pass along some information that could help another member.

Found the factory Bosch boots on EBay and forwarded that info to @conedodger $2 each plus shipping. https://www.ebay.com/itm/226449872571?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=6mp13gWMSgW&sssrc=4429486&ssuid=&stype=2&var=&widget_ver=artemis&media=MORE

The Bosch connectors I purchased were complete with the boot. I can check tomorrow at the shop and see where I bought them. Funny they didn’t come in a complete kit.

Chances are that sensor for the low fuel warning light is probably past its prime. Definitely worth a shot. Nothing to loose by all means.

I agree, Eliminate one variable at a time.

Rob, are you looking for a solid/non insulated mount meaning no rubber?

@jfa.series1 I know exactly which mug you ordered!!

The fact that it’s been lowered comes down to what shocks and springs that were installed . BC Racing coilovers with Swift springs from Japan are an amazingly soft ride. I’ve installed them and recommend them. Experience Not a paid advertisement.

Looks like a carriage bolt that’s been ground down to the shape you have removed.

Moog, makes a set that works well

You are over tightening them IMO. The suspension needs to be under load before tightening them. Meaning the wheels need to be on a block to elevate the car. Then tighten the bolt until the rubber expands a bit over the washer. Personally I’ve never torqued these. Again my opinion.

No wonder, I was looking for it on top in the menu bar. 🤦‍♂️

Can someone educate me where the report function is. I PM @Mike and didn’t receive a response. This was a couple of weeks ago.

Can’t get over the pricing! Back in the day!!

Vintage

Right in my backyard.

@Patcon Grab the NOS if it’s available!!

@conedodger Fly me out!! We will have it setup in a lickitty split!!

Aftermarket regulators are available. New gauges are unobtainium.