siteunseen

https://en.wikipedia.org/wiki/Sebastian_Vettel He was born 2 hours from that track and he's a 4 time world champ in Formula One. Be like Bill gates kid playing Simon. EDIT: Uh oh! I may be wrong. sebastianvittel Follow 61 posts 5,354 followers 401 following Seb WORK HARD PLAY HARD ⛷ ? ? Serious 991 gt2 rs driver ? Nurburgring: + 4000laps since 2008 Check my yt channelyoutu.be/ySk3mA8Cigs

Those cars are made in Virginia. I liked his little pocket book for his Easy Pass.

https://www.thezstore.com/page/TZS/PROD/classic01a/30-7211

Appreciate that! I think I'll have to get one. https://www.thezstore.com/page/TZS/PROD/classic01a/12-4251ki

It's foamy feeling thing, sticky kind of. I don't like mine so I covered it. This picture shows what it turns into. It will give you an idea of what they feel like after 40 plus years in the sun.

I like my Hankooks, 205/50/15 I think. Discount tire direct is where i bought them. Good prices there.

There's no pillar emblems, wonder why? Buy it!

Here's the one 26th is speaking of i think. Post #22 has some great pictures.

There's some talk in this thread of sockets and u-joints and not removing the glass. I'm going to have to study this more as I'm about to try and get mine back to normal. I've read it's almost impossible to get the mirror in with the housing still mounted onto the door.

I'd go to the closest junkyard if I needed one, no shipping and they are easy to get off most trucks.

I've read zcardepot.com has the closest complete set but you need @Zup braided trophy winning advice. Arne has an old thread on this if you google it. Best of luck!

Yes! Your right on the money for for all practical purposes. I apologize for muddying the waters but I was rebuilding mine and have more time to do silly "crap", it wouldn't let me use s h i t. Actually you want that exact spot where the piston "floats". Neither raising or falling.

I remember that car. It's a 260 with a 280ZX motor, IIRC.

Do you have to remove the glass for mirror replacement on a 240? Thanks. Cliff

Mine is "cocooned" in the farthest side of my garage. I'm waiting as long as I can before selling. Paid $1,400 in 2010 for a rust free, original paint and interior. I spent another $500 or so rebuilding the motor. Ended up just wetting my beak for the 240s.

I didn't have a manometer. Once I figured out the front two lobes were exactly the same distance at TDC it was easy. Took 5 minutes. I was building a 2.4 and wanted, and got, it perfect. Two sets of Vise-Grips to lock the cam in place then I installed the timing kit and front cover. Easy peasy for me, my method. Finding TDC A manometer can be used to find TDC. A manometer is simply a U shaped tube with a water or oil "indicator" in it. Air pressure or suction at one end of the U causes the indicator to move. For our Z application, a drilled out spark plug, 3' length of plastic tube, and a few ml of coloured water is all that is needed. Note that a one thousandth inch change in the piston is nearly 1/2 and inch of water change.

I did a weird way but it worked. The front two cam lobes towards the front will look like rabbits ears. I used a feeler gauge to get the lash equal on those two rockers. Atlantic tech tips suggest a nano something or the other but I found my way easier. If you google "finding tdc classiczcars.com" there will be tons of info. The chop stick or straw that i used will get you close but this needs to be dead on in my opinion. Good luck!

I agree. Great respect for Steve and his detailed replies. He's helped me many times and I too think this would be a great document to save.

Get off my lawn you dang kids!

Have you removed the distributor cap and looked for anything loose maybe? Rotor button is on good and tight? Just spitballing...

Might take two walls.

I used a small bottle jack too. You don't want it hanging down at a bad angle. A little pressure from underneath to even things up worked for me. If I'm thinking along with you?

That was funny in my head a minute ago but not so much now. I apologize Dennis. It's been raining all day here and I'm a little stir crazy from being inside. Sorry! Harbor Freight is everywhere thank goodness.

Harbor Freight in Palm Springs? Probably one in Mar-a Lago for the "Beast" when it needs some Schina valve caps.