Jump to content

zKars

Subscriber
  • Joined

  • Last visited

Everything posted by zKars

  1. zKars replied to coop's topic in Racing
    When Greg was initially on the podium humbly accepting 2nd place (again), I couldn't believe the grace with which he accepted that fate. Total class act. Sam his builder was with me and was steaming about the bumping and clearly wanted to protest. Didn't hear until later that the decision had gone Greg's way. Very very glad it turned out as it should have been. Congrats again Greg!
  2. Greg did an outstanding job. The lead changed hands several times between he and Matt. There is some controversy how ever as Matt did a fair bit of bump and grind and got ahead of Greg on the last lap via a bit of contact. There was talk of a challenge at the end. Matt won a couple of additional awards based on the win here so a successful challenge might be quite a blow... It still makes me proud to know that Greg and that dang 260 can run with these "modern" fellas and do that well. Like we need convincing! Way to go Greg!! John did the best he could coming in 10th with a largely un-tested and un-shook-out Z. Got faster every lap, and claims it could be much faster with some work. We are happy he and the car came back unscathed. There is always next year!!!
  3. The white poster on the hatch glass is all the names that appear on the hatch stickers. Each of the contributors present will sign the poster for John. There is a Go-Pro in the car that will record the race from that vantage point. The race is being recorded by the media, so there should be video at some point. I'll record what I can from the stands, and any pre-race stuff I grab in the paddock. Also check racer.com for some more coverage. SCCA - Racer.com There are links at the end of the article about John with some links to SCCA live coverage.
  4. Spent the day at Road America with the Bonk team and John Morton. I'm still floating around, haven't come back to earth yet. I've added a few teaser pictures of the car, and John. I'll upload more tomorrow when the race is done and the dust has settled. The effort that went into constructing this car in the time available is nothing short of awe inspiring. Sam Neave and the Bonk team deserve our gratitude for a job well done. Also thanks from the Bonks to all the financial contributors, each named on the hatch of the car. You all made a difference.
  5. I'll try to keep some feed back coming and hopefully I'll get some pictures to post. We will be at the track all weekend. Going to be a blast.
  6. Exedy is the OEM supplier. Good stuff. For casual street use, just about any of them are fine. Don't buy the cheapest... Just saying. And HI! Just realized you're a newbie. Welcome to the site. Ton's of information in the archives including clutch reviews and news.
  7. zKars replied to Casey_z's topic in Introductions
    I saw a movie once with an airplane in it that had a Z in its name!
  8. Right Tomo, can't hardly wait to get there and see the goings on. You coming? What ever happens, it will all be part of history soon enough, and the stuff of endless discussions and stories for years to come. Anybody else planning on going for the weekend or just for this one race on Sunday? See you-all there. Seems like Wisconson has a few good driving roads.
  9. zKars replied to Diseazd's topic in Engine & Drivetrain
    Sorry to hear this, it is a royal pain. I'de be very suspicious of the crank surface. A speedy seal is a good thing as Steve indicates. No reason for that seal to leak unless something is chewing it up.
  10. Great news about the packing. Maybe there was a fly on the wall listening to the above "comments"...
  11. Glad to hear we're more help than hinderance. Blue with the fuse and noise reduction coil in-line is +12 power to turn it on, Red/blue is dash light illumination, remaining grey and grey/Black(?) are speaker - and + respectively. Radio gets ground through its metal chassis.
  12. No cups in those holes. If these same clips worked before in the old panels, then the thickness of the backing on the new ones must be quite a bit more than before, preventing them from seating all the way. Bang them harder....
  13. This type of resource is invaluable. Each of us has a library like this, some small, some large. Most are incomplete. And as has been pointed out, having a good description of what is to be found in the link would aid tremendously. I have links in these major categories. 1. Commercial businesses that sell Z goods and services (like MSA, Black Dragon, Wolf Creek Racing), 2. Informal home businesses that sell Z custom parts or services. (like Zsondabrain's wiring harness upgrades) 3. Sites that contain primarily Z information, tech help or specifications (ie zHome.org, atlanticz.ca, xenons30.com ) 4. Sites that sell general parts, tools and services items used in auto service, restoration or car modification. (ie Summitracing, AutoZone, McMasterCarr, boltsupplyHouse etc) 5. Businesses from which I purchased a particularly useful item related to working on a Z. Brake lines, JIC hardware, specialty items, etc. You could create many such groups. Z Race prep shops, (Rebello), Used Z parts suppliers (zspecialties.com), Z restoration businnesses (Classic Datsun), etc Unfortunately, in a thread like this, where many put there favorite links in what will become a long list of threads, while superficially helpful, will also go to be difficult to search and maintain. Now if our grand web master Mike would care to contemplate something truely useful for us, I would suggest he build us a system that provides us with a single page resource, where users can add links into a segmented tree-like structure. Take a look at Rock Auto's parts search tree for an idea of what I'm talking about. The system would require the admin to set the root folders (named by major search groups as above, suggested and agreed to by the users). Users can then freely add nodes to each root folder node by supplying a URL, "type" Tag, and a General and Specific description. I'de like to see this within CZCC, rather than have a well meaning member with a web site offer to host it. Same goes for using a shared Excel based website. Something this potentially useful and alive should be professionally maintained and backed up reliably, something I know Mike would do remarkably well. Ideas gang? How would you implement this?
  14. It is not electrically practical to connect two different antenna's together and have them contribute "more" signal strength that either alone, especially the part about one providing more than other depending on mast position. When I pointed out the retrosound site, it was in reference specifically to the HPA1 amplified antenna systems; RetroSoundUSA.com - HPA1 Amplified Hide-away Antenna This device provides a hidden antenna (allowing you keep your original for looks only) that also amplifies the received signal to provide the best possible input to the radio. In the case of the stock radio, this step is critical to get the best you can from it (which ain't much to start with...) Also, many modern ampliers have speaker level input options that don't require a device to step the signal down to RCA jack line level. It will depend on the amp, so shop carefully and talk to a knowledgable car stereo salesperson about your requirements. However, all that aside, there is little harm in just connecting the two antenna wires together and see what happens. Each antenna cable has two internal conductors. One in the center (carries the radio signal), and a surrounding shielding sheath which is grounded at either end at the antenna and at the radio. Dig into both wire casings, expose the center conductors carefully and connect the centers of both, and the outer shields of both (keep them separate from each other!) tape it up with masking tape (used if possible) to keep the "ghetto-ness" of this process intact, and hope for the best. You never know.... And just because I can , I checked Google about antenna Y fittings, and guess who has millions of them.... You need the two female/One male version. Put your knife and masking tape away. Now. Antenna Y Adapter | eBay
  15. The shape of the cover is the give away for me, and then the overall size. The rear covers of the R160/180/190's are quite rectangular, while the R200's are much closer to round. Makes you wonder how only one bolt shears off. Were any of the other bolts loose? Maybe they weren't torqued correctly, or that one was way too tight, or was damaged from a previous over torque. Might be worth an inspection of the other bolts before re-use or just get new ones. R160 R180 R200
  16. zKars replied to ggunder's topic in Interior
    Sean has the correct approach. Bottom first, then the panel has to be bent/rolled what feels like just a bit too much for comfort to get it to clear the strut mount bracket. I would heat that panel up as much as you dare in the sun or with a hair dryer to make it more flexible. Note that you should not only remove the hatch strut from its mount, but then remove its bracket from the welded on bracket by removing the 12mm nut that's hiding behind it. I find a 1/4 drive short 12mm socket on a ratchet handle works best. Its kinda recessed making a box end wrench hard to get on it. This gives you a precious 1/2 in more height to play with. Also inspect the spot welds that hold that bracket to the body (look in the weatherstrip channel and from underneath) and wiggle it to see if it has started to come loose. This is a common issue. Big strain and flexing on that one bracket each time the hatch is closed, especially if you have upgraded to a modern strut replacement. This is partly why they went to two struts on 260/280.
  17. That's an R180 diff. Don't know what its from. That K on the case is a clue, I remember someone discussing that recently. Subie maybe? Is there an LSD unit in the case? The vent on the new one looks like a brass pipe fitting that's been epoxied in. Likely had a hose of some sort attached that performed the vent function. It has to be open (to be a vent) but must prevent moisture and debris from entering. What's facinating about your old diff is two things. There appears to at least 3 missing ring gear bolts (is the center one sheared off?), and is that the remains of one of the ring gear bolts stuck through on the casting web on the rear cover?!?!?!?! (picture 2)
  18. Have a look at some of the antenna options available at retrosound. RetroSoundUSA.com - RetroAntennas
  19. zKars replied to Pomorza's topic in Interior
    Common passenger side water comes from rust and or loss/cracking of sealing compound around the fresh air chimney/cowl seam above the fan, or the windshield weatherstrip. It leaks under the dash where you can't see then finds its way down the firewall to a low spot on the floor and sits there. Strip out the carpet and whatever you have covering the firewall and get a pail of water and start dosing it.
  20. zKars replied to Pomorza's topic in Interior
    Disconnect the wiring to the buzzer!
  21. Yes, or damn near! Silly little homely bricks are shockingly popular. Every home should have at least one Z and one 510 for balance. Agreed?
  22. Oh good. I was wondering if it was just me or they treat everyone's packaging the same way. BTW, I am not just complaining here in the anonymity of the internet. They hear direct feedback after every shipment. Are you listening Greg?
  23. The MSA header has a correct thickness flange. The pacesetting appears thin. The MSA systems I've had my hands on, are pretty reasonable fit and finish. Now if wer can just get them to pack them better in the boxes so they don't arrive with shipping "marks"... hint hint.....
  24. And that lovely red wire that running the coil instead of fixing the problem with the ignition switch. And the spliced heater hose, and the "real" fusible link butt spliced on the starter, and the rusty hood hinge bolts, and the rusty chipped paint hood latch bracket, and the missing/no rubber hood alignment rubber bumpers, missing bolt in the hatch hinge, and the buldging rear hatch finisher panel letting in some lovely exhaust fumes.... and.. oh enough already... "Completely stripped to bare metal" except maybe the engine bay.... Rust free. Yeah right. Give me 15 minutes with that thing to find something you-all ain't gonna like. but yeah, lovely paint! (no bondo eh? hummmph.....)
Remove Ads

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.