Yarb

Saw that episode , pretty funny comments from those three!😂😂

I used the turbo/2+2 ZX 240mm Clutch and a lightened flywheel. This is a stroker motor correct?

Good thought there Cliff. Wouldn’t that be an easy fix after what @ckurtz2went through the diagnostics on this one. Inexpensive as well!!

Now that’s the type of posts we like helping fellow members. Kudos my friend.

I think Banzai sells NOS kits.

For Once tonight it’s fantastic just to see your fellow friends once again on this forum. I always check to see who’s on line at the time. yarb

Got one on my 78

Wonder why @mike has not deleted the 80 plus posts? Am I the only one getting these?

@Mike

Yes they are

I removed the entire bushing on my 280 and the poly bushing flopped around in there. It was designed for the sleeve to stay in tact

Ease a 1.25 in there and feel it out.

I’m up, most I’ve seen is 1.25. But of course I might be wrong!!!😂

Are you sure it’s not possibly a 1.25?

Maybe something to do with the assembly process. Doesn’t make any sense. Not durable at all. Almost a shield to protect.

Wow they must have had some serious corrosion. Mine worked with the slide hammer. Sorry about your luck but you got it done!!!

Good job helping out another member. I’m sure it’s much appreciated.

Thanks Jim, trying to pull out of this food debacle from the ball field. Be careful with that spring compressor. I know you’ve done this many times as I have but it’s just as scary as the first time you tried it!! thanks, Jim

NAPA may have them in their Echlin ignition brand. Could get it overnight.

It’s a step by step process with the FSM or EFI bible that @Zed Headhas mentioned. You will probably find one or more connections faulty. Check each one and record your findings. Jumping to conclusions will put you in a tail spin.

Put it on TDC before you touch anything.

My mistake thought you had an injection system.

Which pump did you use? The factory pumps are still available.

Post is fairly old. @zdude1967Can you provide an update on your findings?

Nicely done!!