Search the Community
Showing results for tags 'rebello'.
Found 4 results
Greetings, Ive been a Z owner in my own right since 2008 (1992 300ZX N/A) but inherited I inherited a 1971 240Z which needed a lot of work. In 2012 I unfortunately had to sell it to a good friend (ortegadrives on youtube). My father told me when I sold the 240Z that his 1977 280Z was as good as mine. My father has a friend interested in buying my 300ZX, which currently has electrical issues but overall solid car regardless. I purchased a Rebello 3.1 Stroker (actually from Dave Record in 2007 to install in the 240Z, still best purchase of my life). The stock 280Z engine was removed roughly 3 years ago by myself and OrtegaDrives and the engine bay is empty. We have a 5 speed transmission from an 82 280ZX, and a R200 LSD rear end. I have a list of to do items: Remove and clean fuel tank remove rear end/install R200 drop in Rebello w/5 speed transmission new fuel filter/fuel pump New fuel line (possibly) new tires/wheels brake job bushings Other than that, this car hasn't ran since July 1996. Is there anything I may be overlooking that must be checked out? Thanks for any helpful hints or advice! Mike
Officially now up for sale is my prized possession, my 1975 Datsun 280Z. This hurts me to write this ad but it's something I must do. I don't drive the car as much as I thought I would, and I am currently starting a new business so financially it makes sense. Before posting it up to Ebay, I figured I would list it here first since this forum has been a huge help with the build. I originally bought the car in August of 2013 and immediately began the restoration process. It was completely stripped down to the chassis, media blasted, rusted areas were removed, and replaced with new metal. The car was then sent to Emmel's Enamels in Denver where it received the full rotisserie treatment. Original Datsun color #904 base coat/clear coat was applied. Countless hours of wet sanding and polishing were done to create a beautiful gloss. All suspension, steering, and undercarriage components were blasted and powder coated semi-gloss black. Every nut, bolt, or hardware that was originally plated was sent out and stripped, and re-plated a beautiful yellow zinc. All rubber was either rejuvenated or replaced with new. Body: 240Z front valance, bumper, grille, and marker lights. 240Z rear bumper. New windshield. BRE rear spoiler. Paint protection film installed on full hood, fenders, and lower valance. Motor: Rebello Racing 3.0 liter stroker. L28 with N42 head. 89mm Cast Pistons. L24 rods with ARP bolts. Turbo oil pump. 63DI 109 Hot B Cam. Triple 45 DCOE Weber Carbs w/ K&N filters. Port and polished head. Port matched intake. 11:1 compression. Engine dyno'd at 301 hp/269 tq Wrinkle red powder coated valve cover. Datsun Spirit MSD plug wires. Datsun Spirit heat shield. MSD 6a Ignition. MSD booster 5 Speed transmission from 81' 280ZX Suspension: BC coilovers with adjustable height, dampening, and camber. Energy Suspension performance polyurethane bushings Wheels/Tires: 15X8 Rota RKR in Black magnesium painted black metallic. Dunlop Direzza 205/55R15 tires. Brakes: Silvermine stage 3 disc brakes. fully rebuilt rear brakes with all new drums and pads. Stainless steel brake lines. New brake booster and master cylinder. Interior: 240Z refurbished steering wheel. Refurbished dash (dash cover currently on). All new bulbs in dash. New carpet, seats, console, headliner and vinyl trim. Retrosound AM/FM/USB/bluetooth stereo with (4) Polk Audio 5.25 speakers. Misc. New battery, new alternator, new starter, new clutch master cylinder, Custom 3" stainless steel exhaust with Dynaflow muffler, Fuel lab regulator, new fuel pump, Skillard fuel tank straps, aluminum 3 core radiator, all new hoses and clamps. Also have original window sticker. I am sure there are a ton of things that I have forgot to mention but this car is in immaculate condition and is basically a brand new car. I have only put approximately 1800 miles on the new motor. This car is an absolute blast to drive and has no shortage of power. Cons: There are some minor flaws here and there, a couple small knicks in the paint. The chrome taillight bezels could probably be re-plated but aren't that bad. The clock and amp gauge are not working. Also missing a spare tire, but have jack and tools. This isn't a concourse restoration but definitely a 9.5 out of 10. Located near Denver, CO. Price is $25000. I am pretty firm on the price, I believe it is a very fair price for the amount of money and quality of work that has gone into this build. I will not accept lowball offers. If you are interested please reply to this thread or text/call me directly at 303-999-7109. Please don't hesitate to ask any questions. Also if there are any specific pictures you want just let me know. Thanks for looking! -Matt Please check out my build thread here for detailed pictures and complete write up. Thank you.
Some of you may remember that I bought a hot Rebello motor for my early 260z and when I first started it there was a clunking sound. Luckily that problem ended up being a clutch slave cylinder bolt that was too long and it was resolved pretty easily. Since then I put about 200 miles on the new motor and its been reliable. Yesterday I went to my garage to start the car for work and after running for about a minute there was a horrific clunking sound so I shut it down immediately and took the truck to work. Its been cold (for the middle of California) in the low 30's (about 0 Celsius) but in the garage I estimate the temp to be in the mid 40's. After work I took out all of the spark plugs and rotated the motor by hand to see if i could feel/hear any interference and the motor spun nicely. With the spark plugs still removed I cranked the motor with the starter and still everything ran smooth. After consulting with the elders I put new plugs in the car and attempted to start it again, this time on video. As you can see the car starts and runs for about 30 seconds at about 1100 RPM before the noise kicks in. What should I be looking for?
I wanted to take a quick minute to introduce our newest sponsor, Rebello Racing. I've worked with these guys in the past and even have one of their engines in my own car! I only like to work with good and reputable companies, and Rebello Racing is certainly one that I'm excited to promote. Let's give them a warm welcome. Don't forget to mention your membership at the Classic Zcar Club and you'll get the red-carpet treatment! (I'm sure they give that to everyone, but, hey we do have some clout!!) Click on their banner at the top/bottom of the website or you can click the following link to jump directly to their website. Don't forget to use our banners/links because that tells Dave and his crew how many people are visiting his site: http://www.classiczcars.com/banners.php?op=click&bannerid=42 If you're in the market for an engine rebuild, or performance parts, give Dave and his crew a shot at the job ! Rebello Racing Since 1984 Rebello Racing has specialized in preparing racing engines as a family owned business. Rebello built motors have gained a solid reputation for producing the most power and reliability among the top competitors in road racing, autocross, drag as well as high performance street applications. The technical expertise and dedication to excellence shows in every project. Performance Parts Rebello is now offering parts that have proven performance gains on the track and dyno. Many years of experience are represented in the selected parts offered. Look over the Performance Parts lists and give Rebello a call to discuss what improvements can be expected for your application. Our Services As technology continues to evolve, so does the development of new approaches to race engine building and tuning. Rebello Racing is committed to implementing the latest in Motorsports technologies to provide customers with outstanding performance. Check out the Performance Services section.
Most OnlineNewest Member