Everything posted by Patcon
-
Need original power antenna for 72 240z
http://www.classiczcars.com/topic/55266-carlisle-import-performance-nationals-needs-show-cars-and-race-cars/ This is his thread
-
New owner of '77 280z from Upstate SC
That all sounds good
-
Need original power antenna for 72 240z
PM cbukzesk He has a lot of parts spread out at Carlisle right now...
-
Carlisle Import & Performance Nationals needs show cars and race cars
I like that drivers quarter, lots of badges and interesting stuff
-
closing sunroof
nix240z has done this on his own Z, and he knows what it takes. You could try to patch the hole but it is hard to do with out warping the roof. The best method is re-skinning the whole roof about 150 spot welds...
-
Carlisle Import & Performance Nationals needs show cars and race cars
That's the kind of advance I need...
-
Carlisle Import & Performance Nationals needs show cars and race cars
Thanks Chuck I have to plan pretty far out to make these kinds of trips and work often gets in the way. I hope to start making more of these in the next few years...
-
Carlisle Import & Performance Nationals needs show cars and race cars
Wish I were closer...
-
Boat vs cars video
115mph in boat is hauling it...
-
ignition switch
Or you could contact one of the members parting cars. There are three currently I believe. I usually feel old used is better than new cheaply made...
-
sweatys rebuild
I would love for you to provide some more details on what it a takes to go this route. If I were doing a car as a driver only I would be interested simply to upgrade the wiring, but since these cars many times switched the ground or had some other oddities I would like to know how hard it is to integrate a new harness to the chassis
-
Rebuilt E31 Race Head
I would agree with Guy. Especially if Rebello did the work...magnet anyone...
- Flaw detection
-
5 speed tranny, any ideas?
Ahh puppies, that'll make you see red...
- HKS Type I Surge Tank For Sale
-
Modifying a '70-71 choke knob to fit a '72
No hurry, thanks...
-
#0064
I saw that but I wasn't sure that wasn't under coater peeling off instead of rust. The big thing to me as far as an unknown is what is the premium on a very early car compared to a car like Grannyknots sub 2000 vin or a later sort of normal Vin car? I don't know but I would think with the recent appreciation in Z car values the very early cars would experience this even more so. If that is rust, then a color change or recent re-spray would scare me even more. A bad "fill it and paint it" would really hurt if you spent $50k on this car only to find the typical chassis rust in the floors, rockers, doglegs and quarters. While this might seem outlandish today I don't think the days of $100k Z cars is that far off. The really low number cars, properly restored will be bringing that in the next 7-10 years, maybe sooner. Especially if governments around the world keep printing money.... Hagerty has them at $50-60 right now, 10% appreciation compounded for 7 years doubles the value to $100-120k...
-
Targa 2016 24oz
You know you are running right at the edge when you have 2 and 3 tires off the ground...
-
Modifying a '70-71 choke knob to fit a '72
@sdyck If you remove the ac system, I may be interested in it although shipping might be kind of steep...
-
#0064
I agree the low vin is really appealing but the 50k is really too high. The car is obviously not "all original" and I would be concerned it has had a color change. If it is not the original color then a need to completely re-spray drops the value a lot. I would think $15,000 to $20,000 wouldn't be out of reason for an extremely low number car $30k at the outside. 50k....No
-
1975 280z base brake booster
I looked a little bit. Everything I saw was NLA. I believe Fastwoman requested one of these kits years ago at the Nissan parts counter and they couldn't get them and they had never seen one
-
Modifying a '70-71 choke knob to fit a '72
Sweaty If you're referring to the little pod on the left side of the console that is usually the AC controls. Dealer add on...
- What engine bay parts are yellow-cad plated?
- Need a miracle!
-
Targa 2016 24oz
Les Collins motor...sounds fabulous