Patcon

If I needed some currently I would order a couple of pairs but at the moment I don't have the need or the extra cash to hoard parts for future projects... They look great!

Shoot a little starter fluid in the carbs and get the engine to turn over. It will pump faster and might prime it. It is very hard to prime the mechanical pump off the starter. Or you could also take the line off on the tank side of the fuel pump and pour fuel down it. It will fill the line to the tank so the pump doesn't have to try to create as much vacuum before it pulls fuel

Jim, I would like to have it, if possible...

Not to sidetrack but I would think #13 would be a $100k car even with the wrong hoses...

$24,500 What provoked you to sell?

@madkaw If you are talking about your link to the MS forum about your hall sensor and resistors and such, it shows up in the previous post when viewed from my laptop

Be very careful about soldering on a fuel tank. They can still have fumes in them even after washing. Blowing yourself or someone else up is bad...

That's a good price for a used setup...

@Blue

Much better!!!!

So is a pristine Scarab worth $50k plus?

That would make sense...

Diameter was one of the things I was wondering about

So does anyone have a door lock cylinder laying around and an early gas door to see if it fits without reworking the door?

I am...please

I will look up that high but if I mount them that high they would take your head off in a wreck. The belts in that picture have a long stick extension that moves the shoulder belt down beside your head...

We acquired some non retractable 3 point seat belts from SteveJ after his visit. I knew there was a mounting spot behind the vinyl in the B post, you could feel it. Went to install them today and cut through the vinyl. Surprise! The hole is there but no nut to bolt into. So now what? I need some ideas for getting a nut inside the B post up high and fixed without butchering anything...

Good sleuthing...

Long distance CH, that's funny!

If you get as far as me you are welcome to the guest house...We are gonna plan on Austin...

Just sit there and look pretty!

Here in the deep south a lot of people carry and make counter offers...

I totally understand...

This is what I found, more complete than yours but would still need a flange all the way around. The other one I thought I had is gone. I don't remember when I cut that section up... If shipping were cheaper it might be worth it, but I don't know. Free for shipping if you decide you want it...

I think they may have been available in Japan. I believe I have seen them for auction there