Topics Last Week

Bruce, good luck on your trip! Looking forward to some pictures from the event.

Myself and others here on the forum have had great success with Power Boosters Exchange. They are located in The North West. Rebuilt my original and they also can powder coat it for you.

IMSA car. Now in Glen’s care.

Pretty late to the party but both Z’s in the video where (I believe) owned by the same guy at that time. He unfortunately sold the orange one and repainted the gray Z to yellow but ultimately sold that car as well for a BMW E92 M3. He now goes by @Dutch_e92m3 on Instagram.

Yeah here in the Netherlands not so much. You can get into serious trouble if you’re caught by the police or “Handhaving” (translated to peacekeepers, basically police without weapon rights and with a main goal to be assholes and write tickets) or get into an accident (voids all insurance and you will be 100% liable for everything). That sad I did take it around the block when I got it home and even though the car runs rich as hell it still drive pretty good. Had some time to look at the car yesterday evening and I might have found the problem. When measuring the resistance values of the AFM and temperature sensors I noticed the coolant temperature sensor (2 pin) suddenly dropping down to only 2 ohm! So I guess that the temperature sensor is bad after all. I hope I can find a replacement as they can be hard to get over here and after that verify the AFM is set correctly.

Let me explain this better. My mechanic is trying to fix rough idle issues when my car is at idle during long traffic jams. He removed the Pertronix 1.5 ohm resistor and the 1.5 ohm resistor connected to a Pertronix ignitor 1711 module, and installed an MSD Blaster 2 coil. The tachometer in my 1972 240Z is no longer working? Any ideas of how should i wire this so it brings my tach back to life.

I just purchased some parts from UAE and Spain, pre-August 29 tariff effective date. Speedy delivery and low shipping costs via ebay. For obscure parts, identify a ebay seller based overseas who have extensive listings and ask if they have (or can locate) the parts. Keith

Excellent example of what I've been calling for the past 12-14 months the "Depressed upper middle class collector car market".

Thanks guys, in the mid term im going to cap it off with an hps 19mm coolant bypass cap. I think I will pick up a spare 3 way pipe as well and see about having it welded / capped off.

Here is a complete E88 cylinder head including valve cover. Ran when parked over 30 years ago. Lubed and free spinning. I would take $300 plus shipping for this head from a ClassicZCars member. Ebay Listing Here

Something's wrong with the first listing. Broken link. The $589 is "Buy it now" and the other is an auction, with three bids to $56. I don't know if EBay auctions have a reserve or not. I'd guess maybe the seller can just not complete the deal? From what I've seen, the way to set a reserve on eBay is to set the reserve as the minimum bid to beat. Maybe he forgot or doesn't know to do that. The $589 is $539 with a coupon.

http://www.zcarblog.com/wp-content/uploads/2020/07/IMG_9860.jpg WE LOVE RACING! Classic Sports Racing Group (CSRG) is hosting the Sears Point Challenge at Sonoma Raceway, October 3-5. Z Car Garage is participating and supporting several client’s Datsun 510 race cars running in B-Sedan Group. This vintage racing event is totally FREE to spectators so please join us! Bring the family, enjoy cool cars and charity rides around the track. Attention DRIVERS: there is still time to register to race! Sign up HERE. http://www.zcarblog.com/wp-content/uploads/2025/09/510255373-1272423368226503-5578166857124943186-n_orig.jpg http://www.zcarblog.com/wp-content/uploads/2024/06/IMG_2779.jpghttp://www.zcarblog.com/wp-content/uploads/2022/09/IMG_0067-1-e1665112285742-1024x614.jpg Again, admission is FREE for this event and you will have access to all spectator areas on track, race cars and drivers. You can see our report from the 2024 Charity Challenge HERE Z Car Garage Supports Five Datsun 510s! http://www.zcarblog.com/wp-content/uploads/2021/09/IMG_5585-1024x768.jpg It is our pleasure to bring more enthusiasts into the world of vintage racing. Our services do include full race support and car-preparation to help make client’s race days seamless and worry-free so they can focus on driving. One of our specialties is dyno tuning. Before a race weekend we confirm that your car is running well and make necessary adjustments while on the chassis dyno: #88 Todd Rueppel Todd enjoyed his Z Car Garage trackside support experience with us at the Laps For Laguna event! http://www.zcarblog.com/wp-content/uploads/2022/09/IMG_0094-1024x768.jpg #7 Kelvin Tse Kelvin and his brother Kenny are regular ZCG trackside support clients… http://www.zcarblog.com/wp-content/uploads/2023/09/IMG_9853-1024x683.jpeg #64 Kenny Tse http://www.zcarblog.com/wp-content/uploads/2023/04/D42_7601-1024x682.jpghttp://www.zcarblog.com/wp-content/uploads/2023/04/IMG_5796-1024x768.jpeg http://www.zcarblog.com/wp-content/uploads/2023/04/IMG_5739-1024x768.jpeg #6 Noah’s Bluebird Coupe #72 Tom Dockery We have helped Tom build and prepare his Ex-Norm Balzer/Koobation 510 for several years. You can view his race report below: http://www.zcarblog.com/wp-content/uploads/2025/08/dockery_Seca2025.jpg #68 and #30 Noah’s 510 and BMW 2002 http://www.zcarblog.com/wp-content/uploads/2024/02/IMG_1245-1024x700.jpeghttp://www.zcarblog.com/wp-content/uploads/2024/02/IMG_1242-1-1024x950.jpg #7 Rob Fuller ZCG owner Rob Fuller, Bay Area Datsun Dealers tribute car http://www.zcarblog.com/wp-content/uploads/2021/07/194911938_10223470558583364_3451851388398014914_n-1024x684.jpg Photo by Jim Rose http://www.zcarblog.com/wp-content/uploads/2021/06/IMG_7351-683x1024.jpg http://www.zcarblog.com/wp-content/uploads/2020/08/IMG_0618.jpeg Vintage Spec Miata http://www.zcarblog.com/wp-content/uploads/2024/02/VSM-Welcome-1024x831.jpg We will also be supporting Vintage Spec Miata! http://www.zcarblog.com/wp-content/uploads/2025/08/IMG_2834.jpg Join us for the 2025 Vintage Racing Season! http://www.zcarblog.com/wp-content/uploads/2023/04/IMG_5896-1-1024x687.jpeg The Classic Sports Racing Group (CSRG) is excited to welcome Vintage Spec Miata (1990-1997) to all of their events! This is a fun, affordable way to get into vintage racing. If you have any questions regarding prep and presentation, reach out to Rob Fuller: rob@zcargarage.com. Z Car Garage is amped for more racing this year. Please check the CSRG website and zcarblog.com for upcoming race events. View the full article

Quite a blast from the past. Filling in the "rest of the story".

Still in original packaging, braided steel brake lines. $100 retail - I'll sell at $50 U.S.

Don't forget about the bronze valve seats that came OE in the E31. They're not good with the gas we use now but you can have them updated to steel for not much money if you're not currently running the head.

Looks like they are also for sale for $1000 BIN with free shipping. eBayAuthentic OEM Nissan Fairlady Z/Euro 70-78 Datsun 240z S3...A once in a lifetime find here! Original OEM Nissan headlight covers originally designed for JDM/Euro Fairlady Z cars. The OEM trim here looks 100 times better than the flat bar $800 reproduction trim

Not the shipping tie downs but the ones that attach to frame maybe? Googled showed some similar when I searched... https://www.google.com/search?q=240z+tie+down+points&sca_esv=06dd4c047f376356&rlz=1C1VDKB_enUS1121US1121&udm=2&biw=1229&bih=556&ei=F8a0aJ7AG4b-p84Pzf-V8Qc&ved=0ahUKEwjep42dhraPAxUG_8kDHc1_JX4Q4dUDCBE&uact=5&oq=240z+tie+down+points&gs_lp=EgNpbWciFDI0MHogdGllIGRvd24gcG9pbnRzSP4gUKwHWIYccAF4AJABAJgBS6AB5QOqAQE3uAEDyAEA-AEBmAICoAJLwgIGEAAYCBgemAMAiAYBkgcBMqAH-QKyBwExuAdJwgcDMC4yyAcC&sclient=img

http://www.zcarblog.com/wp-content/uploads/2018/07/IMG_2471-1024x768.jpg The ZONC Annual Car Show will be held Sunday September 7 in Brisbane, CA. This a fun event in a great location so bring out your Z, G, Datsun or GT-R! Pictures from previous shows can be seen HERE with more details below. Z you at the show! http://www.zcarblog.com/wp-content/uploads/2025/09/540959607_24489751663968460_5939933431851389576_n.jpg Enjoy these photos from previous ZONC annual Car Shows: http://www.zcarblog.com/wp-content/uploads/2017/07/IMG_4083-1024x768.jpghttp://www.zcarblog.com/wp-content/uploads/2018/07/IMG_2507-1024x768.jpg http://www.zcarblog.com/wp-content/uploads/2018/07/IMG_2537-1024x768.jpghttp://www.zcarblog.com/wp-content/uploads/2018/07/IMG_2511-1024x768.jpghttp://www.zcarblog.com/wp-content/uploads/2018/07/IMG_2513-e1533073973161-1024x629.jpghttp://www.zcarblog.com/wp-content/uploads/2018/07/IMG_2423-e1532979419824-768x1024.jpg http://www.zcarblog.com/wp-content/uploads/2018/07/IMG_2430-1024x768.jpghttp://www.zcarblog.com/wp-content/uploads/2018/07/IMG_2548-1024x768.jpg View the full article

A good one. And you can't even here the Beatles.

How is that any more than just a guess - like the "I'm turning down the knob 2 1/16 turns"? Don't you need to know the AFR created by adjusting the jet position? And isn't the position different for varying temperatures and elevations?

@smdvr67 I would delete your personal contact info. Bots crawl the web looking for info like this! Only share personal info through Private Messaging / PM's

Right now it's on the motor, but I was surprised at how the empty cavities will flash rust in high humidity. I'm sure I will always have the obligatory rust. Hopefully some small bolt somewhere,. A speck is a sufficient qualifier... ;)

240Z rear control arm. Powder coated black. Straight. $25 ps Trying to get my garage and desk organized, I plan to list one part, with photo, every day. In the meantime here's a list, minus photos - if any one catches your attention, just write and I'll send photo. All parts are 240Z Two drive axles Two diff mounting springs Brake master cylinder Left headlight bucket pair of the battery and brake cylinder covers horn button heater - water connection New lowering coil spring set clutch and brake pedal assembly :

@Mike , There has been more spam added to the post by the bot.

My mechanic replaced a pertronix 1.5 0hms coil and 1.5 resistor coil with an MSD Blaster 2, 3 ohms coil. He got a better spark at idle and car runs much better. The thing is the stock 72 240z tachometer doesnt work any longer. Can someone give us directions on how to connect this correctly so it works as it did?