Open Discussions
Open discussions around modifications of the Z.
267 topics in this forum
-
- 7 replies
- 2.9k views
hey i am from australia so let me start of by sayin G'day : i am thinking about getting a 240z and trying to put a commodore VL turbo in it , theres one problem , i dont know much about cars and i would like to know if its possible and hard work and mods need to be done to the car to get it on the road and any info and sites so yeah i need some help someone thanks
Last reply by zed240au, -
-
- 6 replies
- 3k views
For those who are interested, this is my set-up..... 1 5/8" headers to 2 1/2" mandrel bend exhaust with the collector moved to a horizontal position. The frame rail was notched and strengthened and a flex joint was added. The sidepipes are 3" and are the modified 60" PATRIOT pipes. The pipes are mounted on hangers for ease of removal and I have 4 1/2" ground clearance. LARRY
Last reply by BadDog, -
Hi , I almost finish with my Z , I wanted to post to see the people opinions , It's been 8 project , from the engine , to the engine mount to the drive shaft to the ECU(Megasquirt) is still to going , I hope by the next 2 weeks I'll be driving my car on the street . Opinions and Question will be apreciated so check this photos and let me know what you think...
Last reply by Q8 KAMIKAZE, -
- 2 replies
- 2.2k views
http://cgi.ebay.com/ebaymotors/Datsun-Z-Series-RB20DET-1973-240Z-no-reserve-Turbo-Z_W0QQcmdZViewItemQQcategoryZ6187QQitemZ4572400411QQrdZ1 Not something you see everyday on EBay.
Last reply by Q8 KAMIKAZE, -
- 18 replies
- 3.4k views
Hey has anyone out there sutffed a 350z v6 into any other zed's? lookin for ideas and any info.
Last reply by kurtwwalters, -
- 3 replies
- 2.8k views
<deleted!>
Last reply by rubbercow, -
Wondering if anyone has looked into what it would take to possible get a Jeep 4.0Liter straight six in their 240z? I Don't know what the tranny bolt patern is but it would be a nice swap. The exhuast manifold is on the passenger side I believe and you would need to make an intake to fit, say an SU carb on it. I don't think you would want to stick with the fuel injection. I suppose you could but there is a lot of extra's on their computer system open doors and other crap you would have to eliminate some how. If we could just get some one to figure out the engine mounts, transmission to put in and or adapter and a modified intake to fit the SU carbs it would be a kill…
Last reply by Carl Beck, -
- 1 reply
- 5.4k views
which is better? there is a definite difference in the price of these two kits. just wondering if anyone who has experience with either of these kits could help out as i am about to embark on a chevy V8 swap in my 1971 240z thanks
Last reply by LanceM, -
- 0 replies
- 1.6k views
i havn't seen a 350 in a 1986 300z why? I am in the middle of installing one in my 86 and it looks pretty easy. does anyone know why there are not more people doing this?
Last reply by tigpro, -
- 0 replies
- 3.2k views
I have a late '77 model 2 seater zed car and am trying to source some Koni yellow shocks. I know these are not available off the shelf but there are companys which will modify the Konis to suit. I have a few questions that I need answered, what are the part numbers of these shocks and who does the modifications, or are there equivilant alternatives? I have looked at the Tokico Illumina shocks, but am not sure if they will fit this vehicle (apparently the very late zeds have larger diameter struts) does anyone know if these will fit?
Last reply by vh41zed, -
- 0 replies
- 1.8k views
In a few weeks time I will be selling my box. I know it'll be hard to find a suitable buyer in Australia but if anyone is interested contact me via pm. cheers
Last reply by That Ozzy Guy, -
- 4 replies
- 3.3k views
I want to give away the molds I used to create the fender flares on my car. Also I have molds for the rear trunk cover and rear tailight panel. I'm in San Diego and they would need to be picked up, because I'm moving and I don't want to move them too.
Last reply by 280Zone,
-
Recently Browsing 0 members
- No registered users viewing this page.
siteunseen
