Topics Last 30 Days

He got back to me late last night (my time in CST). For some reason he had not received my previous email and is not getting notifications from this site so was unaware of the tags in this thread as well as the PMs. Thank you all for helping alert him that I was attempting to get in touch with him, this community is great!

The latest complete Fujitsubo 'Legalis' twin pipe systems will fit your L26 engine and your Australian market RS30 Datsun 260Z perfectly well. The newest type works with your RS30's R200 differential (earlier systems were only configured to fit cars with R180 & R192 differentials). It will also work well in terms of performance (suiting your triple carb setup) and will sound great. Recommended.

This came with its champion radiator.

If there is more than 1 mm of play in the balljoints i would replace them, i believe nissan still have them? just look up the last part number and the dealer has the orig. part.. (If the balljoint comes apart.. someones life ends, would you take that risk?)

The price would be helpful if you really want to get rid of them. Plus being able to turn them over with a cheater bar or something to to show they aren't locked up. You sell on ebay, prostore@ix.netcom.com? Kinda' tough selling motors that have been siting for 20 plus years don't you think?

I bought an N42 that had been in machine shop jail for a few years, guy never came back for it and I paid maybe $200 for a newly rebuilt head with an oiler cam installed. Put it on and went about 5 miles and the god awfullest noise came from the valve train. Limped back home and found a lash pad had come off. Thank goodness there was no damage and @Jeff 78 280z talked me down off the ledge, told me how to fix it and I've not had to look back. Runs great every since.

Those run through the manifolds to warm up a cold set of carbs. They circulate coolant through the bypass lines on the passenger's side and then the thermostat housing. I think they are a potential leak waiting to happen so I have mine disconnected. It's plenty warm in Alabama so they add unnecessary heat through my manifolds. The bigger one near the windshield is actually a thermostat that closes the flow off when it gets to a certain temp and you're right about the front nipple, it goes to the thermostat housing. Here's a bunch of threads about it. https://www.google.com/search?q=240z+intake+manifold+coolant+line+classiczcars.com&rlz=1C1VDKB_enUS1121US1121&oq=240z+intake+manifold+coolant+line+classiczcars.com&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIHCAEQIRigATIHCAIQIRigATIHCAMQIRigAdIBCTMwNTQ5ajBqN6gCALACAA&sourceid=chrome&ie=UTF-8

I have wheel and tires sets for 240z, 280z, 280zx, and 300zx cars. Some sets are OEM and a few aftermarket wheels. Most are in great condition. I set of early z cylone wheels not so hot Let me know what your looking for and I will let you know if I have it. Pick up only in Northeast NJ. Will be posting pics in the next few days. These have been in storage for 20+ years.

Thank you Gav.

Adding an update here: I haven't found the root of the issue. I keep the car at my parent's house, so it's not always easily accessible, but I'm thinking that maybe a brake line got kinked a bit during installation. I plan to check those next. If I don't find anything there, I will switch to the old booster and see what, if anything, changes.

😎

So it's been awhile since I last posted. Remember that aftermarket ECU? I found out it was bad and causing starting issues and the high idle condition. I happened to find an original replacement ECU from another 1976 2+2 and that solved my problem. I also found that the TPS was missing a screw and out of position on the throttle body. As it turns out, the missing screw had broken off inside the throttle body. I was able to source a used one and installed it. Everything now seemed to work except for the temperature gauge. This was baffling to me since I had replaced it with a new one when I replaced the thermostat and the housing. However, that one was a two piece unit. I tested the temp gauge and wiring by disconnecting the connection to the sensor, temporarily running a wire from the the connection to ground and turning the key to the on position. The gauge needle moved from resting position to max within a few seconds, eliminating the possibility of a defective gauge or wiring. This was reassuring, since I was not looking forward to having to troubleshoot a wiring issue, nor did I want to have to go and try to find another gauge. So, I purchased a new temperature sensor, this time a one piece unit. I had some free time to install it yesterday, and Voila! I once again have a working temperature gauge. Here's the one that didn't work: Here's the one that worked: And the proof:

Thank you! Oh there's rust in it, not too bad though in most places. I think that under the hatch sill is probably the worst of it.

It says on BAT and other places...🤣 https://www.facebook.com/marketplace/item/4161254077491653/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks

Good song I heard in a movie with Harry Dean Stanton, "Lucky". Weird movie but he was weird guy in cool way in all his movies.

Valve cover gaskets were never glued from the factory. Still available from Nissan.

Hi Site……If you shave .080 inches from your P90 head, you’ll have to jack up the cam towers .080 inches too. You use the early 280 valves which are approximately .080 inches longer. With this set up, you don’t need the shorter valve seals……they are used when the L24 head uses a cam with .460 or more lift which would squash those seals. If you decide to do that, let me know and I’ll put you in touch with Eiji at Datsun Spirit…..he has everything you need to build that head. He has a ton of Isky Stage III cams also. If you just send him your head, he’ll build you a piece of art. Nice buy for $25.00.

Its a pitty as the car is driveable but has this problem during traffic jams.

He didn't but these guys did.

@Nils Ya, when you press the switch it's supposed to flip into the other position. It sounds like you have a similar issue to what I had originally: I could depress the toggle, it would temporarily switch to the other side, but once I released the switch it would reset back to the original position. Yours sounds a little worse as it isn't even able to temporarily switch. I forget which colors correspond to which, but power comes in through the center connection, and then goes out through the connections on the left or right - one for high beam, one for low beam. Ie, we'll just call the connections 1, 2, and 3, with 1 being high, 2 being the center, and 3 being low. 1-2 would trigger high beams, and 2-3 would trigger low beams. You can test that with continuity. You should never have continuity between 1 and 3. @fredrick that's a spring and a brass cap. It sits in a circular opening in a rocker inside the actual switch housing. The piece is held into the plastic via a roll-pin and is the only part I didn't remove when disassembling the whole thing (I didn't think there was a chance I get it out without it breaking. It's the second picture in the first post This whole setup is quite finicky and I've thought a few times about trying to engineer some kind of replacement, but not sure if the interest would justify it.

I will double check that but I don't believe any of that has been changed since my last test fire. I did remove the combo switches and reinstall. Maybe I messed something up there

Called a "reaction disc"

It's always a mistake to paint/powder coat those rear stub axle brake drum flanges, Nissan didn't.

Well you do! You have an excellent camera.

http://www.zcarblog.com/wp-content/uploads/2022/03/IMG_9042-1024x576.jpg On Saturday, August 30 the Breakfast Club Rally is hosting Tokyo Calling 5, their fifth All-Japanese car rally starting in Sonoma, Ca. To register and see more details, please visit their website HERE http://www.zcarblog.com/wp-content/uploads/2023/06/295347817_10158887321741524_4308179328201520601_n-1024x768.jpg We have run several rallies with Breakfast Club and it is a total blast, you can see our previous event reports HERE. http://www.zcarblog.com/wp-content/uploads/2023/08/IMG_8606-e1693164189785-1024x660.jpeg http://www.zcarblog.com/wp-content/uploads/2022/03/IMG_8882-1024x768.jpeg Stay tuned for caravan information from Z Car Garage. Z you there! http://www.zcarblog.com/wp-content/uploads/2025/07/TC5anim_lg.jpghttp://www.zcarblog.com/wp-content/uploads/2023/08/IMG_8713-1024x768.jpeghttp://www.zcarblog.com/wp-content/uploads/2024/08/IMG_4871.jpg Enjoy this walk-around and driving video from Tokyo Calling 3: View the full article