Topics Last 30 Days

Your links are broken. Maybe create a Google Drive photo album and provide a link. Or just copy and paste them in to your post. You can do that on CZCC. And, if you can't get a picture up, a list of the accessories might help. All the way to the AFM, or back to just a water pump? Exhaust manifolds? Alternator? Good luck. Somebody will buy it.

I'm no expert but in the inertia switches I've installed I've mounted them to a hard point so any energy exerted on the unibody could be picked up by the switch.

To quote a favorite Stars Wars character, "Meesa no lie."

The frame rails (body stiffeners/subframe) are available. A not uncommon problem. https://zcardepot.com/search?q=frame+rail&type=best-selling The car has independent rear suspension. There are two drive shafts in the back and no single axle. The inspection probably identified a misaligned wheel. That could simply be worn control arm (transverse link) bushings. Or even spindle pin bushings. Also readily available. https://zcardepot.com/search?q=bushings&type=product One of the main problems with the AFM swaps is that the EFI system is designed for a certain range of air flow. Once the AFM flap is wide open there's no more control. Nissan adds 27% extra fuel at WOT, probably to compensate for that. Since you changed three/four things at once it might be worthwhile to go back to the original AFM and see how things are. Also, 28 psi at idle is not drastically low. Was the measurement taken with the engine running? There's always more tuning to do with the EFI system after they've sat unused for a while. Good luck.

Hoping someone out there, preferably in the Midwest, has a front & rear type 2 set for the ZX that they'd like to part with. Can be damaged/cracked as well. Would be willing to meet somewhere as well. Thanks.

So i got everything working. I found an issue, i dont know if this was from facotry or the previous owner changed the wiring harness for the headlights but the black/red wire for ground was wired to the center post for the headlights instead of the larger white/red which is how the 1977 wiring diagram shows. I changed everything and put new lights in and it works. However i need new connections because many of the connectors are completely broken and fragile.

Well Mike, you are one of my Masters.

Hi Nils, A name on that Swiss dealer list jumped straight out at me. I believe Rudolf Seiler of Fischbach was the brother of Ernst 'Hunter' Seiler of Romanshorn, a well-known Porsche dealer and racing driver from the late 1940s through to the late 60s. I guess car sales concessions ran in the family. Sorry for the digression!

My 78 280Z does not have that bumper stop. I’ve got a couple from ZCD. If any one is interested send a pm.

Ah... no, that's my Volvo C30 🙂

Is it Charles ? My memory is short . I’d refer you to my thread on Hybridz . I managed to document a lot on there . I also have a thread on the Megasquirt install there . Ask away about anything you read HybridZ3.2 Build EFI N42 / MN47

to last, they need to be welded really good and probably not just around the outer edge but somewhere internally to prevent flexing. Flexing there will eventually cause cracks just like the cars get sometimes at the upper rear qtr to roof joint

I was able to get M4-.7 x 20 oval head screws locally but had to paint the heads with gloss black rattle can. Needed fasteners to hold the A/C control panel on the ICF but no one has oval head thread cutting screws the right size. Ended up getting #6 x 3/4" wood screws which were also painted gloss black. Used a #6 countersink drill bit to prepare the plastic panels I fabricated (pix will follow soon). Looks great when assembled on my workbench and now looking forward to getting everything attached to the car.

I’ll have to recheck my setting for my stroker but I think my fan comes on at 185 and goes off at 180 ? I have an ECU so it turns on my fans at a lower setting at 185 and full speed at 195 .

Yeah, Im not convinced myself. This is their latest youtube video featuring the shell. As Alan mentioned above at the end of the day a Datsun with a body made in China isnt a Datsun anymore!

Thanks for the heads up. I will double check the seat mount location next time I am out there. I was thinking it might be the picture angle but won't hurt to check. Thanks!

@Mike As the title of this thread suggests... It's hammer time. It's time for you to wield the ban hammer. Wield it like Thor. ☠️ *If you wield a tool or a weapon, you handle it effectively. Picture a gallant knight wielding a sword or a skillful chef wielding a whisk. Or picture Thor. Or Mike.

Be patient, They are customer friendly and will get back to you. If your that concerned call them.

Won’t find this info on FB- lol. I worked on a 72 thru Covid . The guy texts me yesterday that he has no rear brakes . I put all new SS lines in his car and had to clean/ rebuild his brake switch valve . I’ve had the weirdest stuff with his brakes . The O rings failed on the brake switch and fluid was forced from one side to the other back up into the MC . Now his rear brakes don’t work - so after reading this I assume it’s that proportioning valve . I haven’t laid hands on it yet . Looks like I have good reference material here . Wish me luck

It's a remarkable bit of production. Kudo's to Nissan Canada for financing the project, and to the Canadian ad agency for designing and realizing a killer advert that properly and expertly recognizes the significance of the Z's role in creating Nissan's worldwide market presence (notwithstanding Nissan's Japan's efforts throughout the 1970's and 1980's to throw it all away). Additional kudos to Nissan Canada for providing its corporate facilities in Mississauga, Ontario as the venue for the annual show-and-shine meeting hosted b y the Ontario Z-Car Association (look it up). I'm really proud of Canada's (continuing) role in supporting the Z legacy. Here on CZCC, I would draw your attention to the importance of our Canadian members in making this site such a valuable Z resource. Those who come immediately to mind are 240/260/280Z (who's written a complete library of Z rebuild articles), along with Grannyknot, CanTechZ, Wheee and zKars (some of the best restoration build contributors that this site has enjoyed). I should also mention that, for years (dating back to 1994), Charlie Osborne at Zedd Findings in Kingston, Ontario, was (I believe) the only source worldwide for decent replacement Z floor panels and front frame rails.

Car is running a little bit better now with the MSD Blaster 2 coil maybe its masking the problem only. Still testing the car. I did noticed the mechanic adjusted the carbs as follows: 4 turns down each carb, 7 at idle screw for front carburetor and 10 at idle screw for rear carburetor. The fast idle screw when raised to 2500 rpm gave different measures on front and rear carburetors.

@One4One I may have something, but I agree with Jim, make a wanted post. There are a few different harnesses for the 73.

How much are you asking for the parts car, and/or is it still available to bring a trailer and load it up? My name is TJ and I live in Washington state.

I had thought about putting the engine and tranny back in. Then the remainder of the parts would probably fit in the car and it would haul easily on a trailer.

Many years ago I started converting the wiring diagram from the service manual into something I could actually read with color coded lines. I scanned the original and then placed it behind the drawing and that is what you see in the pic. If someone would like to pick up where I left off I will send the Visio drawing. If you want to monetize it I would like some compensation. It is probably 90% or more complete but it was sideline project while I was working and I have no time to finish it. If someone thinks the non-complete version is useful I can post it as a .pdf without the original scan in the background.