Zed Head

Edit - didn't mean to overpower grannyknot's post. The "antifreeze coming off the timing chain" just jumped out at me. Not right! Your first impulse was correct. There should not be coolant coming from the timing chain area at all. The coolant system is completely isolated from the crankcase. Your oil is ruined but the engine might be okay. Remove the valve cover again and see if you can find where the coolant is coming from. Cracked front (timing gear) cover seems possible. Did you have any problems removing the head? The two little bolts maybe. Did you remove the front cover?

Yes. Easier to just plug them to block fumes and leave them for someone down the line who might go resto on the car. Plus, they're good ports for electrical wires in the future.

Pumping the pedal will only have an effect if you get the TPS to full throttle "full enrichment". This will increase the fuel through the injectors by 27%. Kind of sounds like you have low fuel pressure or a leaking FPR or fuel pump. Pumping the pedal adds some fuel, keeping the engine going until fuel pressure builds up to where it should be. You could probably just hold the pedal wide open and get the same effect, except it would be scary when it finally takes off. The AAR will be just like holding the throttle pedal slightly open, except that you'll lose "idle enrichment", which probably isn't much.

p.s. The early 280Z electronic ignition was really not much better than points, the spark strength was the same but it was lower maintenance. 1978 is when they introduced the stronger ignition module. The GM HEI module is high energy and durable. It was used for decades. Make sure the 280Z distributor is in good shape. Most of them have rusted/corroded/gummed up vacuum advance breaker plates and/or blown vacuum advance diaphragms. But, you're probably running carbs, so you might not use the vacuum advance, many people don't. If so, you might want to just lock the breaker plate so it doesn't move on its own and cause timing to change.

This one is a good start for the 240Z's. Some people have tachometer problems when they switch to electronic ignition, but others don't. Always a good idea to study the instructions and understand what each wire does before beginning. It's tempting to just follow the instructions and match wire colors but often there is a step missing or just not quite right. http://www.zhome.com/ZCMnL/tech/gmhei.html

Tried to find a video of sound but there's nothing out there. Even the 400Z "proto" was a serious buzzkill. Maybe it's going to be electric.

Found another 33 at the beginning if this video.

Not clear what you mean by "at the beam". Power passes from the combination switch, to the fuse box, where it is split in to left and right, each side fused. High and low beam are determined by which is grounded. So there should be a power supply wire at each bulb that supplies power to the high filament and the low filament. The other two wires are ground wires back to the dimmer switch, one high and one low. I recall that one filament can be burned out but, because it is on a branch with the other, the other can glow dimly as there is a voltage difference across the filament. Sometimes called backfeeding, I think. Anyway, you might try checking resistance across the filaments to be sure none are burned out. One very dim light and one bright one are often a sign of a burned out bulb (actually one filament in the dim bulb).

Man, I hope I don't have to give up my screen name.

Kind of funny/sad that they gave it the sound of a V8. https://www.nissanusa.com/vehicles/future-concept/new-nissan-z.html

I just a got a "Scam Likely" call on my Android phone, and this time a message was left. Something about an iphone purchase that needs to be approved. The Scam Likely callers never leave a message. Spooky. I never should have responded to this thread... And now I've confirmed that they have the correct number. Idiot!

The future - https://www.theverge.com/2022/2/2/22912677/apple-face-id-mask-update-ios-15-4-beta-hands-on-impressions

I remember being vaguely irritated at somebody who used the "I am here at ____'s enjoying a party" function on Facebook, or something along those lines. Had my name and mapped location plus my connection to that person and whatever nefarious things they might be doing. Just for fun I figured out where a guy lived and worked using clues on the web, after he took people's money but didn't deliver a product. Basically stole a bunch of money then had a big wedding party. Wishing people a Happy Birthday on Facebook is another good one.

That will get you on the "something to hide" list. Just remembered another - Onstar. https://www.onstar.com/us/en/home

Actually, they would just garnish your wages. Or maybe take your equipment. I had a friend making good money selling pizza in a college town, for years. Somebody wrote an article about the afterhours "pizza guy", the IRS got wind of it (I think Pizza Hut complained) and they came out and took his ovens. But it's not really a product of the government itself it's just how bureaucracies work. The NSA collects data, the IRS collects taxes. If these agencies really knew how to use the data they collect 9/11 would never have happened. The data just sits out there, useless. Just another government job.

The odds of finding a 3.9 CLSD are very slim. You'll have better odds of finding a 3.9 open diff that you can then install an MFactory CLSD in. Edit - Actually, it's a helical, not a clutch. Just a suggestion, so you can open up your search options if you want to.

Might be tied to the spam calls. They see a corporate account. Have you contacted Verizon about it?

Too many spam calls and it's time to bail out of society? Seems a bit much. So, have you signed up for the Do Not Call registry or not? It's a real thing and it really works.

Are you saying that it won't start? Or that it starts but the tachometer doesn't work? Did it work with points?

I have Simple Mobile which is the economy version of T-Mobile. Must be why. It works. I hung on to my flip phone for as long as I could. The smart phones are pretty handy though. I even leave Bluetooth and Location turned on, I had one of those COVID monitoring apps on it for a while (I don't think it really worked). Reminds me though - WiFi on to connect to your home network? Set to identify networks? Every WiFi network you pass through when you leave home knows you were there. Even with an iPhone.

Google shows me ads for stuff that I will never buy or for stuff that I have already bought. Their "trap" will be pretty easy to escape. The people making the telemarketing calls are just reading from a script. Anyone who engages with them is probably making their day. More reason to keep calling you back. Your number gets shared as an active possibility. If you use a credit card, a ton of personal information about you is collected and shared. What you bought, where, and when. Automated toll paying (EZ-Pass, whatever) they know where and when you hit a toll road. Parking enforcement uses license plate readers. Probably collecting and sharing location and time. Streaming TV account - what you watch and when. You can go on and on. All they're trying to do is sell you things. You'll now you're trapped when you start buying things you didn't really want.

Why does that matter? If they're doing that then they're certainly monitoring this forum. When you say "they" you must mean some sort of computerized word searching. There are way too many phones and conversations to think that actual people are doing the work. There's probably a list of certain words known to be associated with certain activities. I get almost zero spam marketing calls and my phone often says "Probable Spam" on many calls. I don't even really know who's ID'ing the calls as spam. It's an Android phone. I'm on the Do Not Call registry too. So the Feds know my number. The FTC.

Is your number on the Do Not Call registry? Let the Feds help. https://www.donotcall.gov/ https://www.ftc.gov/faq/consumer-protection/list-number-national-do-not-call-registry

My Federal 76 didn't have it. And the 75-76 Federal intake manifolds are popular because they don't have it. Cleaner looking.

That could actually be a tough one. My 76 cap seals were shot and you can't get a replacement cap for less than hundred + dollars. And the seals are not easily repaired. https://www.thezstore.com/page/TZS/PROD/11-3221