Diseazd

Why would you ever reuse those rockers when for under $50.00 you could have beautiful Nissan Delta regrinds? I can see reusing the cam if it shows no damage, but never those rockers. Everywhere there is a pit, there is a little nasty piece of metal hopefully in your oil filter. Go with the regrinds IMHO

Hi Jim.....I’m no engineer, but have never had any problems with Nissan reused without a regrind or Delta Cam regrind rockers. Folklore is that Nissan had it right with the two metals (cam and rockers) as far as compatibility. Delta does a beautiful job, cheap and quick to return. I always use Nissan Isky regrind Cams ( Stage III) and Delta regrind rockers and have never had a single problem in probably 20 builds if you count 510’s. Good Luck Guy

My thoughts exactly.....”If it ain’t broke, don’t break it!”

Try applying heat.....the rubber should soften up to slide over the neck. Don’t get the heat gun too close to the gas tank or the fumes could cause a problem lol.

Hi Zedy....Looks great, but you need to work with those white safety socks! ?

They’re not kinda, they’re really sexy. Can you imagine 6 SU’s on a 240Z? Wow, I wonder if that has ever happened? Bet it would be a blast!

This is going to be a very nice driver.....looking great!

205-55-16......I tried em all......these work really well without rubbing on dips. Same height as stock.

That’s a rack for my Go-Jack foot jack dollies. I have to dollie the white car around to fit the 4th car in that garage. I used to use these, but it’s a pain to roll around a jack to put them under the car. Now with 4 pumps of the foot on each Dollie, the car is ready to push round. ?

Finished putting Eibach and Tokicos in the white 70 car. Looks like it lowered it more than usual when installing Eibachs. Tokicos are getting hard to find.....had to pay up from Whitehead Performance for these.

Z art.......

Jamal.....Got the valence and corner pieces today. Quickly shipped, nicely packed and just as advertised. Thanks Guy

My favorite shot.......

Just constantly “doing stuff” to all my cars. I’m going to arrive Thursday, so won’t be entering a car. Looking forward to meeting you Jim, and all the other Datsun addicts!

Installed new chrome center trim on a set of Z tail lights......

PM sent......SOLD

...........you guys are describing me and BamaZama to a “T”.........right Cliff? BTW.....the car was an absolute “steal”!

All feel smooth and balanced, but the L24 crank and rods is smoothest to 7000 rpm. They all are a blast in different ways.....come to Richmond and we’ll drive em all Charles.

Pretty much nailed it Zed Head. I prefer the P90/P79 head shaved down and shimmed up to get 10 to 1 CR minimum. A high duration, high lift cam (I run 17 degrees static advance on all 5) with performance valve springs to handle the rpm. Swirl valves help the engine breathe....I run SU’s and love their simplicity (can’t seem to step up to trips)....they work amazingly well for all my engines, through full rpm (up to 7500) with no sign of not being able to adequately feed them. The only thing I think would really bump them all up is CR. If I could run 13 to 14 to 1 CR on pump gas, I would. All 3 of the different engine set ups that I’ve built are a blast. Like kids, it would be hard to say which one I love most!

Sorry Zed Head.....no numbers yet....best guess is close to the L28 crank engines I’ve built....170 at the fly....195-200 at the wheels. The two Stroker Motors are first in line for the dyno, just can’t seem to find the time. I will tell you they are a smooth accelerating blast to drive, but the strokers are real torque monsters....they feel like they want to break something. ?

This is going to be a fun project to watch! Way to go modern Jim.

Definitely makes the restoration when done right......

Yes Jonathan....The L28 crank motor is 170 hp at the wheels, so approximately 200 at the flywheel. Eiji said the Stroker motor should push 250 at the flywheel, but I haven’t dynoed one yet.

My Isky Stage III is 290 degrees duration. I’ve built 6 of the .080 shaved P79 head/ F54 block different variations. All 6 have Isky Stage III Cams. Four have .040 over flat top stock pistons. Two have Datsun Spirit Forged Pistons (they are 3.1 Stroker Motors). I built two with L24 cranks with L28 pistons and rods, two with L28 stock cranks with L28 pistons and rods and two with LD 28 Stroker cranks and forged Pistons and rods (Datsun Spirit built the two 3.1strokers). I love each and everyone of them......the strokers the most?. I would definitely go with the Isky Stage III....do it now or you will regret it IMO. I have several build threads under (topics) on my home page you can reference. No ping at any rpm or load on any of the six engines.....fabulous set up you are building.....kudos. Let me know if I can help. Guy

Yes jonathanrussell....outer springs are shimmed .080 to make geometry correct.