Carl Beck

A pretty amazing collection - worth downloading the Digital Catalog.. great info on lots of mini-cars. There is also a 76 TR-6 with a few thousand miles - $30K to $40K expected. I'm afraid that runing this whole lot at one place and time - will not bring top prices for any of them. Looks like all will be sold with no reserve.. FWIW, Carl B.

Sorry Jerry - no help here. From use, both labels seem to have worn out and fallen off my 72. 80K miles now.. Carl B.

Mr. K and his wife are certainly amazing people. Wonderful to hear that they are healthy and doing well. That looks like Masataka Usami and his wife in the background. Thanks for the update.. Carl B.

As pictured that was Joel Anderson's Z. According to Joel - It started out as the 1972 OMS Pace Car and was purchased by Joel {Frank Leary's Crew Chief} from the Datsun Competition Dept. for $1.00 and Joel picked it up at Sear Point from Bob Bondurant in 1979. It was prepared for IMSA GT-U. The Z was featured in the movie "Herbie Goes To Monte Carlo". Joel said he sold it to a friend, that was going to prepare it for SCCA GT2. Les - do you know who the owner is now? FWIW, Carl B.

No - I don't have a written spec for them. Not too many bolts in the 240Z 8m-1.0's as I recall. Most are 1.25 or 1.5 FWIW, Carl B.

Alan - the metric fasteners in the Z are JIS - Japanese Industrial Standard. The metric that is 8mm with a 13mm head is ANS/ISO or DIN. Here in Clearwater, FL - our local ACE Hardware Store carries some JIS hex head bolts - maybe someone near you does too. FWIW, Carl B.

Does this mean that you will have the Bilstein's for sale? Also do you know what the spring rate is for the Tokico Springs? From my older notes, from Ken P. in 2006 - I have 120 lbs/in for the progressive rate springs and 140 lbs/in for the linear rate springs. Does the "kit" come with adjustable rate shocks? FWIW, Carl B.

I'd agree with ksechler - walk away. Even at $1000.00 -You don't need to buy major problems.. way too many clean Z's in California...keep looking. FWIW, Carl B.

I'm in Florida, USA {pretty hot here all summer} - I've never had a vapor lock issue with any 70-72 240Z here. Maybe you didn't actually have a vapor lock? Perhaps some other restriction in the fuel lines? Are you running headers - with no heat shielding? Is your fuel return line clear? Carb's in good shape? Did you eliminate the mechanical pump when you installed the electric pump? Just curious. Fuel lines pressurized to 3.5 psi - 4.5 psi should clear any vapor problems fairly quickly... Did you ever get the problem solved?

The Euro Spec Springs are about 10% stiffer than US Spec springs - if you cut a couple of coils off to keep the same ride height - you'll be about 20% stiffer than stock - nonetheless that is still a relatively soft spring rate. I think the Bilsteins would be just fine with that... Hi Bill: If they work well with the OEM springs - they really should have a broad enough application range to work well with slightly stiffer springs, without blowing them out. As I recall - BRE/Interpart used a couple of different OEM's to produce the "Mulholland" brand - the early one's were actually Koni's and the later one's were Boge. In both cases the OEM's part numbers are stamped into the body shell at the bottom of the shock. Sometimes that is covered up by the paint used to make them "Mulhollands"... FWIW, Carl B.

Hi Dave: I do not know of a retail source for either of the spring sets. You might find a set on E-Bay, or buy them from someone like me - that has a few sets. We have learned a lot since 2005. First - the Euro Spec Springs combined with modern Gas Pressure Shocks - will not lower your 240Z - the combination will RAISE the ride height of the car - in some cases by as much as 1 1/2 to 2+ inches! To get the rid height back close to original - most guys had to cut 2 to 2 1/2 coils off the springs. The same is true for the Stock Springs combined with modern gas pressure shocks. Although fewer coils had to be removed. These newer gas pressure shocks have significantly more gas pressure than they did 20 years ago. So with the upward force they have - they unload some of the normal pre-load exerted by the corner weight of the 240Z's {around 650 lbs}. That Said: I still have the NOS Euro Spec. Stage I springs that we used for the model from which to reproduce them. I'd sell them for $400.00 plus $50.00 for packing and shipping anywhere in the US. I also still have a couple of sets of the "Stock" Reproduction Springs. I'd sell them for $279.00 plus $40.00 shipping and handling anywhere in the US. US Postal Money Order or PayPal.. Drop me an E-Mail or PM if you can't find anything for less. I'm in no hurry to sell them.. FWIW, Carl

If necessary I use 600/800 grit metal oxide wet sand paper, on a flat/straight sanding block about 6" long. I put the heads in the parts washer and flow cleaning solvent over them while working the sand paper. I've only had to do that a couple of times - normally just the cleaning solvent in the part washer and a gasket scraper do the job. FWIW, Carl B.

HLS30 00013 is the lowest VIN Datsun 240Z released for sale to the public, that we know of at this time. That is supported by some Factory Documents as well. HLS30 00012 down to HLS30 00009 - are at this point MIA - so not accounted for. Rumor was that they went to Canada for extended cold weather testing...but who knows? FWIW, Carl B.

Normally International Bank Transfers are fine for large purchase amounts - but many of the banks here charge fixed service fees for accepting or sending funds in that manor - It can be anywhere between $5.00 and $25.00 USD for the fee. So it's easy to see why a purchase of parts for $10.00 would not be too profitable for them. Also - everyone fears being burned by Internet Fraud or any financial transactions from outside the US. The legal issues that might arise are just too difficult to deal with across international boarders. FWIW, Carl B.

Alan - Great Thread. Thanks for pointing us to 'take432r' Photo Gallery - it is good to see some clear pictures that allow detailed views of these unique Z's. Also wanted to say that your summary of the "r" alterations was not only informative, but fun to read. Kats - very interesting to have some actual sheet metal thickness measurements. I went out to the garage and measured the OEM Frame Rails and Front Fenders that I have - they are Frame Rail = 1.27 mm / 0.050 inch - 18 gauge {0.478 nominal, 0.0438 Min. and 0.0.518 Max.} Front Fender = 1.37 mm / 0.0539 inch - 17 gauge {0.538 nominal, 0.498 Min. and Max 0.0548} Checking the weight of cold rolled sheet metal - per sq. ft. 0.6mm / 24 gauge cold rolled steel weight 1.00 bls per sq. ft. 0.7mm / 23 gauge cold rolled steel weight 1.125 bls per sq. ft. 0.8mm / 21 gauge cold rolled steel weight 1.375 lbs per sq. ft. 1.0mm / 19 gauge cold rolled steel weight 1.75 lbs per sq. ft. 1.27mm /18 gauge cold rolled steel weight 2.0 lbs. per sq. ft 1.37mm/17 gauge cold rolled steel weight 2.25 lbs. per sq. ft So if the fenders actually are 0.8 mm it looks like about 0.9 lbs could be saved per sq. ft. of sheet metal. A wild guess would be that a front fender has about 8 sq. ft. of sheet metal {fender and brace}. So a "stock" front fender should weight about 18 lbs {8.16 Kilograms} and the "R" fender should weight about 11 lbs. {5 kilograms} All just a wild guess - but it would be interesting to weight each type of front fender. FWIW, Carl B.

Yes - the headliner was glued directly to the roof metal. There was a thin layer of foam rubber between the metal and vinyl headliner. I've had very good results with 3M SUPER TRIM ADHESIVE 3M Super Trim Adhesive, 08090, 19 oz-Shop 3M The adhesive that Nissan used originally is amazing stuff - 40 years in the Florida sun and the headliner is still firmly in place. FWIW, Carl B.

Hi Bart: Good to see you return - I take it that you could not access your original user name / account? That showed "Bart Hoedemaker" joining in 2008 with 181 Posts? Nonetheless this was a great project to watch.. FWIW, Carl B.

As I recall - every one I've taken off a Z, has had the Part Number printed on it - so I'd say yours is factory. FWIW, Carl B.

Nice Street Mod Z - looks like some good work was done on this one. Sold for $10,400.00 - - very sad for the seller... Sold with No Reserve.. 1972 DATSUN 240Z Lot 49 | Barrett-Jackson Auction Company I'd buy it for that amount any day.. The seller would have been better off on EBay.. FWIW, Carl B.

We have a speciality shop here, well actually several in the area - I used them to press out axles and check the bearing races etc. It only took them about 10 minutes - and cost me $20.00. Money well worth the time saved and hassles avoided. They have the equipment to quickly, easily and safely do the work. Just a thought. Carl B.

WOW!! $114.00... I need to update my inventory list of NOS parts... I had them listed at $25.00. I guess if a 40 year old used one is worth $49.00... FWIW, Carl B.

I use a Snap-On "wabble extension" with a short socket. I also clean & check the threads on the bolts when I have them out, then shoot a little Kroil on them. That allows me to screw them in with my fingers farther to start with. FWIW, Carl B.

Those are the pictures I took of the OEM chin spoiler that I had - I sold it to Burton Brown for use on a Bonniville Speed run. While somewhat flexible that one was molded fairly straight across like the lower finisher panels of the 240Z's. I think the spoiler that the OP Posted is for a late 260Z or 280Z body - mostly because the lower finishers on those bodies were rounded down, for the larger radiators used. I doubt it would fit a 70-73 240Z or early 74 260Z. May have just been tagged incorrectly in the dealers inventory.. I have a BRE spoiler for the 280Z's that looks a lot like the one the originally ask about. The BRE unit is fibergalss, but has the same more round line to fit the lower finisher panels on the 280Z. Although the BRE unit extends down toward the ground farther. FWIW, Carl B.

I'm not sure what an "ashtray/fusebox cover" is. or what is meant by that. So just to be clear...The Series I cars have an ashtray and a cover on the top of the fusebox. Both in good condition are getting hard to come by. FWIW, Carl B.

A Good Deal Always Gets Better. A Bad Deal Always Gets Worse. Looks like you got a very good deal. A/C with the rotary compressor.. clean looking engine bay.. FWIW, Carl B.