Leaderboard

Recently, I was able to obtain something rare, which I've been searching for five years, or so now. But let's start in the beginning. In 1937, Nissan registered a daughter-company called "Nissan Auto Sales Co. Ltd." as a sales division spin-off. In 1957, the same company registered the "NISSALCO" trademark, with the aim to develop and produce service tools for Nissan factories and workshops. They produced all kind of mechanical and electronic testers but also accessory parts for Nissan Car owners. Here is a picture from the Nissan Cherry assembly line, with a NISSALCO sign above every test bench: Today, the company is still existing, but under the "ALTIA" Name. In the early 70ies, they developed a Special service tool box for the Datsun 240Z sports. ST0929-0000. And yesterday, I finally got one, after many years of searching for it. The toolbox comes with a selection of Special tools for the 240Z. And this box came with a lot of extra tools inside. You can lift out the upper case, and then you have access to the lower level. Mine included also the Booklet that comes with it. So first, I had to get all the parts out and go through them. Luckily, i collected some of the Datsun / Nissan / Kent-Moore Special tools books over the years. And the box (even though without any part number or information) and some of the tools are also listed in the US-service manual: Sadly, I quickly realized that my purchase came with a lot of additional tools which do not exactly belong to the S30, but random Datsun's, and some original tools from the box are missing. It seems that the previous owner also recreated some missing tools. Overall, it's still a good starting point. After cleaning the box out, hammering the metal straight and fixing the locks. it started to look good. I wanted to keep the patina, but still clean up all the parts. so i gave them a quick wash in the parts cleaner: And then put the original parts back in: Assembled (some tools are not correct): And closed: The set also included this nice Nissan wooden tool box, with the lovely lock: I still have to figure out yet what this is used for, but i just love the looks of it: I'm also working on to restore the original manual that came with it: But it appears that the last few pages are missing and the back cover. But still better than nothing. It also has a very strange format, where each page is only printed on one side and then folded to have a print on both sides, which is a bit weird. That's it for now. I will try to keep finding the missing tools and pages. If you know something, I'm happy to hear from you. Expect some more tools related stuff in the coming days, but i also hope to work on the car itself again, in the next days. Stay tuned!

Hello, everyone. I am also a member of S30 World. I’m very happy to be a member of the team. Thank you Carl. Carl recommended me to Chris’s big project. In addition, I definitely thank Alan for promising to join the team because I am a member. Chris visited my house in 2018. I was very impressed that he was very sincere about all the variations of our car. And his dream was to establish and enrich the museum with cars that have received great restoration work. It’s all because of the Classic Zcar Club. We have been learning a lot from the people here. I’m making a lot of friends here. We are all connected in a simple way. Z. We know that there are no cars that have been restored 100% correctly. The S30 World is trying to restore the car close to 100% correct. Chris’s great passion is outstanding. Many enthusiasts have been involved in his project. It’s like magnets on the fridge. I think all the posts here are worth reading to make our beloved cars more beautiful. I think people who post here are like magnets too. As Florian said, we are simple. We want to enjoy the S30 more and spread the joy of our cars to the world. If you see the car at the S30 World Museum, you will surely like it. We need to correct the “100% correct” word into the appropriate word. But all the black painted floors and other little things are repaired in good faith, so even if we don’t fix it, you’ll like it. Oh, stay tune, I will report an interesting things regarding S30 World soon. Kats

I don't see anything wrong with your marketing or terminology. 99.9% of people can see the detail and perfection of work that has gone into these cars. No-one expects God-like perfection. When you are king of the hill, you might have to kick a few people in the face as they try to knock you down.

I don't really want to chime in here into this discussion, but I have seen the S30.world cars in real life, and talked a lot to the people behind it and all I can say is: - Those are the best restored Z's I have aver seen. And I have seen plenty of them over the years. - They make their own parts, where new ones are not available anymore, and those parts are the best reproduction parts I have seen, with real attention to details. - The team behind it is OBSESSED with small details and correctness. Down to things like the correct color and position of the bolt-marking dots. Everybody is free to have your own opinion, but I really recommend to check out the cars in real life and talk to the people behind it, and then only you can understand how many extra-miles these guys went to build some of the best restored 240Z's out there.

Good morning and greetings from Germany/Europe. After reading along here for a long time, I am now introducing myself as the ‘marketing guy’ from S30.world. Even if this might be a mistake, because I'm speaking up as a "newbie" and will surely get 40 knives rammed into my back. But I'm willing to take that risk. So please forgive me if my language isn't perfect and I don't know most of the people here in the forum. I think the community here has been connected for a very long time and it's difficult to let someone outside the USA into the "inner circle". But let me at least try, and I hope that a certain amount of friendliness in all directions will certainly do everyone good. As Chris already wrote, we are busy every day doing our best and put a lot of effort into understanding and paying attention to every detail as best we can. Of course, the fact that our team is located all over the world also plays a major role in this. We are in the Netherlands, Hungary, Switzerland, Australia, England, Japan, the USA... This is very important because the S30 series was not developed solely for Japan, nor solely for the USA, nor solely for Europe. The entire S30 family is a globally designed car. And every export market is different (even though, as we know, the USA makes up a large proportion of exported cars). But not many people know that European cars are significantly different from those in the USA. The fact that cars in Portugal are also VERY different from cars in the rest of Europe is also an interesting story. But why is that? What impact do laws in Australia have on cars in the USA, for example? What do changes to cars in Japan have to do with cars in Europe? Why are there still 260Zs and no 280Zs in Europe and other export countries in the years 76-78, while in the USA it is the other way around? These are all questions whose answers are connected like a tight net. So you should never look at just one export market. That would not be the whole story. We, as a group of people spread across the globe, gather our knowledge and try to answer questions. (For example: who knew that between 1969 and 1978 there were 10 different factory hubcaps for the Zs?) We are simply passionate nerds who not only restore cars, run a museum and reproduce parts, but are also on the hunt for all these undiscovered mysteries. I think it matters less which words in our press release are "allowed" from this forum – because surely it is also our goal to appeal to people who haven't owned a Z for 50 years, but are new to the topic. Above all, it's about sharing all our experience (people are already laughing about the fact that I was born in a Datsun. My family has been driving Datsuns since the early 1970s, and the first car I ever sat in was a 1973 Cherry E10, a model that wasn't even available in the USA) and to create a place that inspires all Z fans worldwide. I therefore invite all sceptics to visit our museum in the Netherlands and take a look at the cars. It's certainly exciting to see how they are built. Incidentally, we are very grateful if anyone on location notices that, for example, a screw is the wrong colour or a hose does not have the correct number. But please don't judge something like that just because you see photos on a computer screen. Come and visit, you are invited, and I am sure that we are all nice people who share the same hobby.

Dear all, My name is Chris Visscher and I am the owner of S30.world. For the past 10 years, I have focused a significant part of my life on increasing the appreciation of the Datsun 240Z/Nissan Fairlady Z, which we all cherish. With my partner Gustav combined we did about a total of 60 restorations to date. I would like to thank everyone here for their feedback. We are removing the white 240Z with VIN HLS30-15662 from the masterpiece program. You are right, the underside of the car has been completely repainted, and that should not be the case. The press release states that it is factory correct. You are right, it should say: as close as possible to when they left the factory. I am the last person to admit that a complete factory-correct restoration is impossible. All I can say is that we did our very best and made special rubber mats (for the 1969 cars), special air ducts(for the 1969 cars), a fuel tank for each of the different years, the insulation mats under the paint on the bottom, behind the dashboard , etc.etc etc I myself have dismantled many cars that were produced from October 1969 to the end of 1970 and compared all the parts with other project cars. So I have done everything to gain experience. In addition, we have different first paint cars starting with #2xxx and #19xxx that we have used as examples. We will certainly have made mistakes, but I can tell you that we have done everything we can to do it as well as possible. I am proud of the result and I hope you are too! I'm also very proud about the team we put together from all over the world. JAPAN, USA, UK, SWISS, GERMANY, AUSTRALIA, HUNGARY. They are all giving there free time to get appriciation for the S30 to another level. S30.world - The platform . Please read about it. If you want to help us and the community and have further feedback on the cars or the website, please email it to chris@s30.world, I appriciate it very much! Thank you in advance for your help.

It lives!!!! 20251005_140045.mp4 IMG_4799.mp4

I just wanted to chime in, since I'm also a member of S30 World, a later edition, so not in the group photo with Takeo Miyazaki, which took place when the museum opened. However I am thrilled to have been asked to join in and represent the Australian part of the team, as mentioned Chris' goal is to ensure we have a global perspective on these cars and I've been the local train spotter in the Australian market for many years now, having got into my first S30Z back in the late 90s and joined this website in year 2000 I believe? I am also the owner of a couple of low vin # Australian delivered cars - which have their own unique differences. Even though I've been passionate about the S30Z for 25+ years, I still have things to learn, especially when it comes to cars delivered to markets outside Australia. I think we are all still learning, which is why the S30 world project and website is important, to help educate, discover and document. I'm also thrilled that through the restoration work Chris has spearheaded new parts have come to market to provide quality OEM-like reproduction bits and pieces (eg: fuel tanks and door seals just to name a couple). I was fortunate enough to see the quality of work first hand back in 2017, a local Australian had his car in display at the Nissan Datsun Nationals in Sydney. (attached photos). I've seen many 'restored' cars over the years and this was indeed top notch! Obviously not a 'factory style' restoration, but a superb finish none the less. The quality of finish achieved on cars completed since then has only improved! On a personal level, I feel the S30Z series have been greatly under appreciated for many years, however it would appear that more and more are starting to appreciate these cars these days and I'm very happy to see more cars getting quality restoration work performed at this level.

Are you going to ask these same questions to anyone else now?

to be honest i havent even looked at the exhaust. Im assuming it does have cats. I did have a 10K potensiometer laying around and tested this hack from siteunseen and it did work when setting the ohms to ~1000. Car reved to 4500-5000 before shifting without any hesitations. im not planning on driving aggressive at all. but just trying to get the car running well.

Cody figured out the turn signals today. The signal flasher is a thermal variety even though it looks like an electronic flasher it's not. If we add just one incandescent bulb it flashes as it should. So I ordered some that are electronic with an additional ground. We'll see how they do. He also replaced all the bulbs in the dash gauges with LED's

Big milestone today: the dashboard is now back in the car since it was removed in 2008 at the beginning of this project. Lots of 'field mods' but that's the stuff that builds pride of ownership. Hard to believe that 17 years of "just plain life" have passed by. But, I'm on a roll now and I hope to be back on the road by spring.

The brake booster tool is nice. That's a nice find!

Don't assume that new aftermarket u-joints will be better/tighter than used Nissan joints. Nissan's specification is very precise. Each joint came with clips of varying thickness so that play could be adjusted and set correctly. New aftermarket joints come with one clip thickness for all. I replaced a set on my car and they didn't seem any better. I actually removed them all and returned them. They were Precision from O'Reilly's. The Nissan joints are greaseable and are often just fine after a shot of new grease.

Half shafts across all years are the same replaceable snap ring retained ujoints.

This is the one I used with LED lights https://www.amazon.com/dp/B0811GTVH2?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

Does it have Cats?

Are you sure your exhaust can breathe properly? Possibly the exhaust system could be a variable.

searching for a potentiometer is not so easy now adays. i miss radio shack.

You should never disassemble both sides at the same time! That way you have an assembled one to look at. If you didn't keep the parts well sorted then the auto adjust might not work. The sides are handed I believe

As somebody respected in his field, I'd hope that you might empathise with people who are attempting to restore cars as close as is reasonably possible to how they were when they were new and making them available to people who understand and appreciate that intention, whilst also understanding the implicit truth that it is simply not possible to attain perfection in terms of factory finish. That should go without saying, regardless of any over-enthusiastic sales patter written in their second language. Constructive, objective and informed peer-group critique is something that we can all continue to learn from and the classiczcars forum is a good place to do that. It is nice when wise old heads pass on their knowledge and experience. But S30.World appears to be the target of some 'Not From Round Here' type finger poking which I would hope looks just as parochial and small-minded to you as it does to me, and it would be refreshing to see an occasional positive comment with regard to the spirit, if not the product of their efforts.

Oh. I didn't realise that it was you who got to choose the current topic. Quite a responsibility. Good luck. Name some of these "old-timers" and show some examples of their work. This same dichotomy has been faced by anyone else who "restores" one of these cars. Even the elusive "old-timers" you mention will have been up against the logical impossibility to make something exactly as it left the factory. You have nowhere to go with this line of critique. It's a cul-de-sac. And by the way, pictures don't show "facts". You may well see things that confirm your convictions, but that does not make them 'fact'. Point of order. I could hear that penny dropping in your head from the other side of the Atlantic. Have you seriously only just cottoned on to that now? Sheesh. Wait 'til you realise who else on this forum is volunteering their time. You asked "Is it a paying position?". Answer is NO. "On the board?". Answer is NO. "Stock options?". Answer is NO. I have my own self-demarcated areas of interest and alleged 'expertise'* which I can potentially contribute to the cause, as do the other volunteers. That's it. But your questions imply that my motivations in sticking up for the work of the company in question are materialistic. They are not. What are yours for the opposite? Again, the cars you are pointing at are not part of the 'Masterpieces' program. Will it ever sink in? Will you sail blithely on by once again? Probably... Top marks for spotting a speeling mishtake. You won a Goldfish. It was only a few short weeks ago that you had simply no idea who or what S30.World is, and you were even calling into question whether their reproduction fuel tanks were a 'scam'. Now you're suddenly classiczcars' very own Walter Winchell. It's like somebody put some water in a bag of Sea Monkeys. QED.

For your part, you never ever seem to answer a straight question. You just rock off on your own, often non sequitur, stream-of-conciousness stuff as if you're talking to yourself. You ask questions that have already been answered - often in your own links - change direction and ignore points being made. Take a peep in the mirror occasionally. Here's the thing about your "reality", and SpeedRoo's pot-shotting. You two are picking fault in cars that are not part of the S30.World 'Masterpiece Collection', and which are not going to auction on BaT. You don't know which cars are part of that program, which cars are on their way to Group 44 nor which particular car is going to be auctioned starting on 23rd October. You've jumped the gun. S30.World has a museum collection in Buren, Holland (as you can see in the photo I posted above) and this includes cars that are 'survivor', unrestored, original paint cars as well as cars that have been partially refreshed. You will also see examples of cars from various European markets and - for example - the Portuguese 'Entreposto' variants which had a very particular specification for that market. Examples of these cars - and work carried out on them - are documented on the S30.World platform. They also have cars that are being restored to customers' specifications. *So, anybody seeking to pick holes in the 'Masterpiece Collection' cars might be well advised to make sure it's actually a 'Masterpiece Collection' car that they are picking holes in.* I've already said that, in my opinion, '100% factory correct' restoration is a logical impossibility. You may well contest the somewhat hyperbolic language used in the promotion, and I'd agree, but I've seen the cars in question and they are indeed excellent. I can see the effort that went into them and I've talked with the people involved. 100% is a fine target to set yourself and getting as close as is reasonably possible to that is fine achievement. I wouldn't put a percentage on the achieved level myself, but the cars are stunning and several people I highly respect - including a Nissan employee who was involved in the development of the cars in period - agree. By all means pick apart the first car when it comes to auction, when you can see the detail photos and - I should imagine - video provided. Group 44 should be ready to answer our queries and our curiosity. It would be nice if this was carried out for the love of the cars and for the greater good rather than for scoring points against someone who is motivated by 'my enemy's friend is my enemy'...

interesting is the extra rear stabi bar on the euro versions

You've already quoted the names behind the business. Perhaps you don't read your own posts? "...just selling car parts..."

And...? What's your point? I experienced HLS30-00023 in the metal and it is certainly restored to immaculate original specification. It's one of the best restorations I have ever seen, if not the best. If the phrase 'original specification' is troubling you, I can't see why. The specification of the car is arguably the best representation of its original specification that it is possible to achieve for a running and driving legally-registered road car (and yes, it was driven some distance by several people on the day I saw it) rather than a static exhibit. We discussed tyres on the drive, but running it on the brand and type of tyres it sat on in 1969 would be impractical if not dangerous. It has modern fluids in it. Modern paint formulas, electroplating that's probably more environmentally friendly than those of late 1960s Japan. We could go on, couldn't we. And hence we arrive - dancing - on the head of that pin I mentioned... I wonder, what would you say about the car should you find yourself one day standing in front of it and next to the team who restored it? Somehow I don't think you'd be taking a wheel off to run your spectrograph over the front brake calipers. On the other hand, maybe you really would be that guy. At this point I should remind you that HLS30-00023 is not the car that is going to auction on October 23rd. For me, it was a great privilege to experience it in the metal, running and driving. You on the other hand are looking at photos.

How have I "missed" anything? I haven't made any claim about that car and I didn't build it. It was nothing - literally nothing - to do with me. You've gone off half-cocked. As above, I have not made any claim about these cars. And who is this "mate" that you refer to? You seem to have made some assumptions that are more arse than umption. I asked you who were the "so called experts" you were referring to, and answer was there none. So I'm not very hopeful, but there it is. I'm getting the feeling that you are confusing the messenger with the message. Again. Did you also miss my mention that a healthy dose of pragmatism goes a long way when getting involved in the restoration and refurbishment of these cars? The mere fact that a car is 'restored' will naturally mean that it is no longer original or factory correct. Rivet counting and nitpicking from the Peanut Gallery is fine up to a point (I partake as much as anyone else) but taking it all the way to its logical conclusion we all end up dancing on the head of a pin. Even the record-setting green car on BaT had plenty of non-originality on show. How far do you want to take it? 1970 air in the tyres? Perhaps it might be worth reminding ourselves that the term 'Factory Correct' is a fine intention, but a logical impossibility if taken literally. Personally I'd tend to take it as more of a statement of faithful but necessarily pragmatic target-setting. There will no doubt be plenty of shots at point-scoring on the BaT auction, which is par for the course and fair enough. And people who take sales patter a little too seriously might like to pop back to 1969 to remind themselves that these cars have had hyperbolic statements attached to them from Day One. Personally, I'd say - with English understatement hopefully detected - that these cars are pretty good. But by all means, show me better.

Today, the first official announcement of the S30.world 'The Masterpieces Collection' sales, to begin on 23rd October: S30.worldS30.world - The Masterpieces programThe Masterpieces program Garage 44 of Annville, Pennsylvania will be coordinating sales in the USA.

A couple of pages from period Japanese magazines which covered the 'Program' show engines and engine parts (see attached). Clearly - and fairly obviously - the engines were rebuilt and warrantied. It's not like overhauling an L24 was rocket science or anything. No rare earth elements involved. Putting forward the idea that that they were just given a spruce up and a coat of paint is fairly, er, out there...