Yarb

I bought a new rack a little over 2 years ago from a specialty company that strictly sells rack and pinion assemblies. I’d have to go back and find the vendors name in my records but they do exist.

Amazon has the adapter as well from Glow shift

Install a mechanical gauge. T adapters are available

What history do you have on this parts car?

Install A fuel pressure gauge after the filter. Takes a lot of guessing out of the equation.

@Blitzed I bought a P79 head a couple of years ago that was rebuilt. I went another direction with my build and have not done anything with it. Send me a pm if interested and I can send you pics.

Try looking for A Beck Arnley new MC.

@siteunseenWhat gear ratio are you running or did I miss that somewhere 😂🤣

Might want to get underneath and cut the damage out first and see how far the rust has gone. You might be looking at floor pans as well.

You have a structural issue . Far from cosmetic. I realize that’s not good news. Take a ice pic and work your way up and down that frame rail.

Best bet is to find a used replacement that has not been opened up and messed with. Talking about the plastic cover with original silicone in place.

Appears something’s not right here.

@Captain Obvious Correct on my 78

That’s quite a bit of work to build a engine run stand. Are you suggesting installing it in the car and cranking it there?

Rob, I’m interested in a combo/turn signal switch if it’s available. Thanks, let me know

Nice Work Jim!

Looks like some fiberglass work on the frame rail/pan

Kano Kroil oil let it sit overnight

Check out American Modern. Mine is in the restoration stages and I insured it for 30k. $258 year. You can raise or lower it at any time. $100 deductible

@Mike

Yes

Yes, your asking for trouble if you attempt that.

Somebody’s got to have a pic…

Freshest Bass Ever😂😂😂

How about one of the old school mechanical hand drills?