Patcon

I was doing some Googling on English wheels and came across this. I would love to fabricate some metal fender flares like this. I like the original shape of the quarters but I would like to see them exaggerated more to give more overall flare. I don't like the shape of many of the aftermarket fiberglass flares. They seem to conflict with the original lines. These videos show what I'm talking about https://www.youtube.com/watch?v=491K3bqJ_9M https://www.youtube.com/watch?v=c8K7RLT6BJY https://www.youtube.com/watch?v=Od9QeWsor6E Enjoy. Really cool what you can turn a flat piece of 20 gauge into... Charles

Many times the booster dies because brake fluid leaks from the rear of the master cylinder into the booster. The fluid destroys the rubber diaphragm in the booster so it no longer holds vacuum. The diaphragms are basically not available. Booster rebuild companies don't want to sell just a few and wholesalers I've found want a 1500 minimum order... Charles

Keep in mind if you get a used one, be sure you can get the old strut out. I have sold some in the past and have pulled the struts to make them lighter to ship. I had one I could not get the strut out even chained between 2 trees with a come-a-long pulling and heat. They can get very corroded in there. Charles

If you have a hard time finding some, send me a PM and I will look thru the shop. I probably have an extra set... Charles

Steve would be my first choice for anything. He is a perfectionist. His parts are very well made and to very high standards. Charles

For starters I would think the spacer limits heat transfer to the fuel pump ie. the fuel. Also the further down the pump arm the eccentric runs the more leverage it has so the greater volume it should pump... Charles

8k ???? for WHAT? C

My comment was not to use the ones you removed (I assumed they were toast) but to get supports from a donor car and weld them back in... C

Why don't you just get the original ones and weld them back on? C

The car should be fuel injected. It was from the factory, but they do get converted sometimes... Charles

I am operating from memory, which is suspect, but it was my understanding that the later model the brake connection was in a different location. The existing line can be reworked to work. Charles

Wow! That's some well done barbecue... C

Not me, but I went to Bermuda 18 years ago. Loved it! I want to go back if I ever find the money. Have a great time. If you like diving make time to go, there are a lot of great dives there. Charles

It is rusty, but if I didn't have a project I might take a stab at it. The rear quarter rust and possible frame rail rust would be my biggest concerns. The doglegs and floor pans don't bother me that much and they have a replacement panel for the rear hatch sill too. I wonder what the reserve is? C

The rocker panels have 2" diameter or so holes all down the interior sides. So they have very good access to atmospheric humidity. You may slow the rust, but its still gonna rust from humidity. The job only gets bigger the longer you let rust run... my 2 cents C

emccallum PM'd you Charles

A 240z between 2 Dinos, I love it! Whip em... C

I really like the Fedhill products. I have never used their flair tool but it looks like the right tool for the job. Charles

That's really cool. It's neat to see how they are thinking outside the box for the next generation of engines. C

I haven't ever seen one of these in person, but it seems like you could make one fairly easily with a flairing tool and reuse the nuts if necessary. C

Can you even get the small boosters anymore? I had not seen one anywhere recently. Charles

That's great. Happy Birthday C

I agree with what the others have said. You could ask an attorney but I would think an international civil lawsuit would cost several times what the car is worth. If you have any more issue with this seller, tell him you are going to contact the dealer licensing agency in California, I don't know what it is called in that state. If he doesn't back off, contact that licensing agency. Tell them of your issue and that the seller was tapering with the paper work. State licensing agencies don't take kindly to dealers who behave this way. I know what would happen to this seller in South Carolina. If he is not a licensed dealer and selling that many cars that same agency will be interested in that also. Hope you get him to go away, but it is an expensive lesson, I would be more than willing to inspect a car for you or help you with shipping. As would many members here on the forum, Charles

One factor to consider is interest rates. The central banks of the world have set interest rates so low (basically zero or even negative) for so long it is hard to park cash anywhere that gives even a modest return with out having it in the stock market. Many people have turned back to antique vehicles and art to park cash to try to realize some kind of return. I am not surprised that we are seeing these kind of numbers given the toppy nature of the stock market these days. A corollary would be to look at what art is bringing at auction these days. Just a thought for what the root cause is. Many of the purchasers are not car people. They are collectors looking for assets that will appreciate. Charles

I am glad I covered the questions. I really thought I could pick one of those cars up for $1000 or so plus fees. I was surprised there was enough demand to push the prices that high... C