Yarb

I think he may be talking about applying a sealant similar to windshield adhesive to the new gasket.

At this point I’d be inclined to replace everything that you bought from him. Not worth the chance. Did you replace the pistons as well?

I guess the next variable would be,,,How do you determine if you have a 73 240 radiator. A lot can change in a 50 year time period.

Need a lot more info than what you have given. Pics, source of where the carbs were sourced etc. Anything you can add is helpful. Reasoning for replacing them etc etc.

Give me a call. Might have something for you.

@PatconCheers to you friend for helping Sir!

If you read further back in the thread he has lost a quart of oil. IMO carbs are not part of the equation. These carb’s from what I understand just got back from Z Therapy.

@HusseinHollandWhere did you find the molding?

@Av8ferg

@Captain Obviousby chance if the builder used chrome moly rings, Don’t the cylinders have to be honed differently than standard rings. We still don’t have information on what was used on the original rebuild.

Never heard back on the plug condition per cylinder

Possibly an oil ring,Just throwing that out there.

Sometimes you just have to be MacGyver on these cars. Especially if you’re working alone!!

My opinion is to roll it back to 10. Is it running good?

I run the exact tires and have no issues and they are very smooth and quiet.

If it’s shimmying at 55 IMO tires are not your problem. Could be wheel bearings,rim, that’s not true. It’s easy to go down a rabbit hole chasing this.

My opinion is to roll it back to 10. Is it running good?

Have you done the remove the oil cap test and see if it wants to stumble a bit?

https://www.buyautoparts.com/buynow/1978/nissan/280z/rack_and_pinion

@chaseincatsmentioned the zcar store earlier in the thread. I checked ZCD when I saw the thread. Didn’t find a replacement. I bought one, have to go back and see where I found it.

Sometimes you have to bite the bullet and get an original. Not sure what MSA has but can’t go wrong.

@siteunseenHey Cliff my 78 has the coat hanger wires you speak of. I wonder if they were changed out incorrectly. 77:78 owners please chime in. May have a mystery here!!

Saw that as well this morning. Worth a shot for sure.

I think that’s 3m 8001. We used to call that “Yellow Death” at the machine shop. A nightmare to remove!!