bartsscooterservice

Well the future seems ****ed up anyhow. I need to last at least another 30 years before I can go with retirement and get the heck out of here.

very nice work !

I bought the 1970 Mustang Fastback, it's a solid car from California. Needs some minor work but nothing fancy. Also replaced the worn out seals on my rear lights and replaced the center trim the old ones where in bad shape, especially the left one was flaking.. A few hours work, but the result is so much better.

Did it go to a fan, or just a rich guy who bought it as an investement ?

Should have tested the factory float and jet settings first. Now it's hard to have a reference point.

Use a timing light, and set the timing around 5 BTDC with the vacuum advance disconnected. Then connect it, and hit the thottle and watch the timing marks advance on the pulley. It should read somewhere around 15 to 17 advanced. Now you are running 15 without the vacuum advance, it's advancing way to much imo.

If they are brand new, did you change anything to the stock factory float height and jetting ?

Uhm, it's only because the exhaust valve tends to get hotter, so they keep some more play in it ( hot expands ) But 0.10 for all valves works fine.

I sold the 71 Mustang Mach 1 project to a guy in Germany. I will be buying another Mustang soon. Currently looking at a 1970 Fastback F code. After comparing them, I do like the 70 look more, it's not that big as the 71.

Me to. That's why I bought a Mustang and kept the Z... Z

I use the classic line from Kroon, it's a Dutch brand. Specifications say: Classic Gear EP 90 minerale ( mineral ) SAE 90 transmissieolie ProductspecificatiesAPI GL-4 Mil-L-2105 MB 235.1

You'd be amazed what I see on a daily basis in my work.. ..other garages doing things only half or worse.

180 degrees out yes. Better drop the oil pump and distributor driving spindle, and do it right before you fire it up. Put no1 piston at TDC of compression stroke first. Then install.

Yes they tell something about Rob Janssen who advised some modifications to Nissan about the 240Z, who was a Datsun dealer at the time.

Ja ik snap het ook niet even over de koppeling.. English: If you wan't anything translated out of this article let me know ?

This reminds me of my first Z.. Why didn't you go for a better shell/other 240Z, is it because you wan't a european one ? Anyhow looks good ! Very nice work..

I don't know exactly either Chas... What I can find on the service manual is that the 4 speed ratio is 3.900 and the 5 speed 3.364

Uhm in Dutch it says Z types.. maybe Google translated it wrong.

Or you could find an original 5 speed gearbox for the 240Z but those seem rare Didn't t the later 280Z and ZX have 5 speeds allready ?

I wouldn't run ethanol crap on a classic car.

I mailed a Dutch newspaper, and they seemed to have picked it up cool.. http://www.telegraaf.nl/autovisie/autovisie_nieuws/nissan/23719356/__Datsun_240Z-bedenker_overleden__.html

Yeah I also use the stuff of Meguiars, or sometimes Chemical Guys, they have a product for every need.

A little video a friend made on the highway today. I can't go much faster than 100/110 mph ( 160 ) because of the US 4 speed gearbox. Modern traffic is doing about 80 to 90 mph ( 140 ) on average. But that's okay it's a classic. View My Video