siteunseen

Trico 44-180 refills fit both my cars very good. $8 at O'reilly's. https://www.oreillyauto.com/detail/b/trico-5077/wiper-blade-motor-16494/wiper-blades-25089/wiper-refill-12826/83ee6f490634/trico-18-inch-natural-rubber-wiper-refill/44180/4748890/1977/nissan/280z

I have a good housing on my 240 but the mirror is broken. I've taken all the pieces out and now have a round stick-on from a chain store stuck in there. Fortunately a "gift horse" smiled and showed his teeth. The fronts looked like new but the rears showed their age. Zup sent me a good mirror with a dented housing behind it. I need to transfer the glass mirror he sent to my car. I thought I could get it out fairly easy with these but it did not work so good and now I nervous about breaking the mirror and the 7 years of bad luck that go along with that. Putting it back in will (should) be easier with a good round piece of hardwood, a section of an old mop handle from the restaurant is what I was thinking.

Yep and it's not going too well. I can't get the rolled over chrome off the good glass. I've decided to take it to an auto glass shop. Scared I'll break it.

Those green ones on ebay,fj3 I think, are on a few cars on here and well liked. I bought Standard fj707t I think from rockauto.com and they do very well too.

tatty

Here's some good reading on the question. https://www.google.com/search?rlz=1C1BOFA_enUS494US494&ei=n3NUXLboM6ip_Qax0qWoBQ&q=stock+SU+air+filter+box+is+working+compared+to+2+round+K%26N+filters+classiczcars.com&oq=stock+SU+air+filter+box+is+working+compared+to+2+round+K%26N+filters+classiczcars.com&gs_l=psy-ab.3...1209.6599..7093...0.0..0.101.1250.16j1......0....1..gws-wiz.......0i71.2D2caPPCrBo

I was lucky enough to get an original mirror for mine that's been mia since I bought the car. Anybody have any experience rolling that chrome/stainless? lip that goes over the beveled edge of the mirror to keep it in place? Thanks for any replies.

It got down to 45 degrees in my garage last night! 18 degrees outside of the garage. I spent my money on the "pink stuff".

Do these Zs jump around for anybody else or are my eyes bad?

@madkaw He should get an email notification from this.

I remember a friend's Mom had them on her ZX. I think they were for street parking so know one would knock your door off.

Keeps out the riffraff.

Yes! $20K would be my starting number if it runs out okay. Good looking car.

Tabco still makes them too. Fitment is iffy from what I've read, no personal experience with zcardepot or tabco panels. Zcardepot is 100% to buy from, that I do know.

You need to come out into the light! You have some neat stuff going on it sounds like. Cliff

I had sticky nozzles that wouldn't come up plus bad out adjustment on the valves. The PO had used 1/4" fuel line (if I remember right) for the hose from the float chamber to the nozzles. That does not work very well. Bought the thin wall hose from ztherapy, adjusted the valves and boom, new car.

You got a deal there Guy! If it doesn't fit send it on down to Alabama.

A little late...

It won't let you say uhsembly.

Take a carpenter's square, the big L shaped one, and lay the big edge on the bottom. If it's bad you'll see the gap.

It's 2.5 from the top. Turn them clockwise until they snug then go counterclockwise down two and a half.

I have a Felpro on my 280, no issues since 2012. You can buy just the HG from local chain stores. Nonstocking but next day usually. I bought mine from Advance.

Lowes has a pool pump gauge that will work but you'll have to add the brass barbs on to it to put it in a fuel line. Not so sure they will be willing to get pool supplies in January though.

Over ride bar would be for blew eyed scope? One blew east the other blew west.