zed2

Correct. Keith

Beautiful, even the seat vents look authentic. Keith

Can anyone identify the model year application for the application coolant "T" connectors (CTC)? Thanks, Keith

Can anyone identify the model year application for the left throttle bell housing pivot (TBHP) ? (The right TBHP appears to be from a 1970 240Z.) Thanks, Keith

What is the production period this pan is appropriate for? Thanks, Keith

Is this jute sewn to the carpet of your Dec 1971 US 240Z? Also, heel pad appears identical to mine shown in #138 above. Keith

Kats, I believe the "L" vehicles had some "luxury" features, including the driver and passenger floor carpeting. My 1970 circa heel pad is shown below Please post a photo of Watanabe san’s car's heel pad. Thanks, Keith

Kats, Is Watanabe san’s car a Fairlady Z-L( https://global.nissannews.com/en/releases/release-13d7bc8a1f613356fb7f04775611b5c4/photos/1)? Regards, Keith

1970-1978 DATSUN 240Z, 260Z 280Z and 280ZX Hose Clamps View Advert 1970-1978 DATSUN 240Z, 260Z 280Z and 280ZX Hose Clamps These clamps were recently yellow zinc plated and have the round (not hex) head screw. The price of an individual clamp is between $18.50 . Quantity discount may be available. Shipping is available USPS insured. I only have the 19mm size shown in the photo currently available. Thank you for looking at this ad. Keith Advertiser zed2 Date 08/11/2022 Price $1 Category Parts for Sale

The thickness of my reproduction jute is 9.59 mm. Keith

For USDM, the early Z (Series 1) was delivered with a rubber mats. A California based trim shop (Chester and Herod Auto Carpets, not located in Texas) manufactured a five (5) piece carpet set which was generally installed or included in the rear hatch area prior to the vehicle being delivered to the dealer. Some dealers overlayed the carpet on the rubber mats. Some dealers removed the rubber mats prior to installing the carpet. It is still unclear whether the jute underlay was factory installed under the rubber mat. Why would Nissan have an underlay (that could potentially trap moisture) under a rubber mat? Sound deadening perhaps? Keith

Prototype: Natural color Final color: I have not yet trimmed the cutouts….I am still attempting to confirm the actual cutouts based on my 240Z production date. The material I source is 39+/- 1" in width, currently I can purchase 10 yards, imported from overseas. I then have to have the material color matched. I then have to hang the material outside to reduce the fumes. The materials, chemicals, and labor for the two front mats shown above are approximately $450 all in (this is a set I plan to use). As I have discovered on some samples, the color did not penetrate 100% of the material, leaving some of the original uncolored material evident. Therefore, I may have to have the material color matched after cutting to pattern. I have not tested the color for colorfastness, off-gassing in an enclosed vehicle, and water repellency or absorption. Therefore, I consider any sample and my set a prototype. At this juncture, it is not feasible to offer large pieces to others. I want to get some samples to Z owners for their feedback. Once I have confidence in the process and product I will make it available to the Z community. Keith

I have this one. PM me an offer if you are interested. Keith

Can't wait to see what is new: Keith

Does anyone have a master list of the various hose clamp sizes and their fitment in the engine/dash compartments? Thanks, Keith

I have two (2) styles of Accelerator / Gas Pedals Does any know the model/production year of these? Thanks, Keith

Same manufacturer. Keith

Two variations of lenses (note the shape of tab at the bottom of each lens: Keith

View Advert 1970 - 1978 DATSUN 240Z 260Z 280Z Overhead MAP LIGHT / DOME LAMP 1970 - 1978 DATSUN 240Z 260Z 280Z Overhead MAP LIGHT / DOME LAMP Auction includes: Housing Lens Bezel Bulb Thank you for looking at this ad. Keith Advertiser zed2 Date 07/17/2022 Price $84.95 Category Parts for Sale

For the sake of documentation, below are two (2) Accelerator J rods. I cannot determined the original model/production year, since the parts were included in a box of parts I previously acquired. Keith

View Advert 1969-1971 240Z reproduction clear vinyl seat protectors Since these clear vinyl seat protectors are no longer available from Nissan, nor are reproductions available from existing fabricators, I sourced a large quantity of clear vinyl material to fabricate reproductions. These are for the 1969-1971 seats that do not have the recline mechanism. Set of eight (8) as shown in photo, (plus close-up photo) Material is same gauge/thickness as original Photos show: Set of four (4) original, aged and yellowed clear vinyl seat protectors and set of four (4) reproduction clear vinyl seat protectors. Set of eight (8) reproduction clear vinyl seat protectors - what you would receive upon ordering. The pricing is $48.00 shipped to a CONUS address. Shipping will be insured with tracking. If you are interested in a set, please PM me your full name, mailing address and Paypal address. I will then send you an invoice. Note, these are time consuming to produce. Therefore, I will only send the invoice when the set is available for shipment, production timefame as noted below Thanks, Keith Note: The last time I offered these was January 2022. So if you plan on needing a set before Fall 2022 please order now. Orders accepted in the first available production time frame ------------------------------------------------------------------------------ Maximum sets available with 1 week production time frame - 4 sets Reserved: 2 sets - Joseph A. (FB) - shipping Advertiser zed2 Date 07/14/2022 Price $48 Category Parts for Sale

Excellent...good memory about a prior post! Thanks, Keith

Does anyone have a comparison photo of these two type oil pans? Thanks, Keith

View Advert Datsun / Nissan 240Z 260Z and 280Z Wheel Chocks - pair - date code Jun 1975 Datsun / Nissan 240Z 260Z and 280Z Wheel Chocks - pair - date code Jun 1975 Originally included with the Datsun 280Z – Production Date Jun 1975 These chocks are 3.96 inches / 100 mm wide. Can be used with the 240Z and 260Z as well as other applications. Unfortunately, I do not have the other tools. Thank you for looking at this ad. Keith Advertiser zed2 Date 07/09/2022 Price $99 Category Parts for Sale

View Advert Datsun / Nissan 240Z 260Z and 280Z Wheel Chocks - pair - date code Apr 1975 Datsun / Nissan 240Z 260Z and 280Z Wheel Chocks - pair - date code Apr 1975 Originally included with the Datsun 280Z – Production Date Apr 1975 These chocks are 3.96 inches / 100 mm wide. Can be used with the 240Z and 260Z as well as other applications. Unfortunately, I do not have the other tools. Thank you for looking at this ad. Keith Advertiser zed2 Date 07/09/2022 Price $99 Category Parts for Sale