Everything posted by siteunseen
-
fuel mixture or jet adjustment nut settings
Surprisingly there's people that don't understand left and right looking from the top. Hence my analogy, driver's side and passenger's side.
-
2017 Z Nationals, who's going?
Will you be driving a red Z? Maybe newer than what we're used to?
-
fuel mixture or jet adjustment nut settings
When I've explained it in the past, trying to be as simple as possible, turning them towards the passenger's side=leaner. Driver's side=richer.
-
fuel mixture or jet adjustment nut settings
Mark make sure he understands the mixture knob. I turn mine CLOCKWISE until they are snug, then COUNTER CLOCKWISE to 2.5. I'm sure it's a typo but who knows?
-
Somethings wrong...
Well now, what a sweet looking little girl you've got there! Congratulations, everything else is secondary from here on. She's smiling too!
-
Wanted: 240z (preferably modified) - Cash Waiting
If you haven't seen this yet, it's a good read. http://zhome.com/Classic/CommonZRust/RustPrevention240Z.htm
-
The Classic Z Motley Crew
I trust that she'll be wearing boy shorts, hard to tell from that pic? And her umbrella may be south of her belly button so as long as I'm laying on the ground bring her on! I'm a good tipper tell her.
-
The Classic Z Motley Crew
If you could get me an "umbrella girl" that'd be special...
- ZCON 2018
-
oil drain plug size
http://m.oreillyauto.com/h5/r/oap/site/c/detail/DAG0/090039/02330.oap?year=1978&make=Nissan&model=280Z&vi=1209260&ck=Search_02330_1209260_-1&pt=02330&ppt=C0023 They also have assortment of copper gaskets in the Dorman or Help section at chain stores. I found one that's copper with rubber inside for a tight seal around the threads.
-
New front bearings won't go on the spindle
I found it, http://atlanticz.ca/zclub/techtips/frontwheelbearings/index.html
-
The GREAT 2017 ZCON picture thread
Something didn't work Zedy??? I'm sorry! I clicked on the image and that sent me there.
-
Wishing I was at Z Con, but installed my seats and door panels
In my, limited to CZC.C and Memphis, experience they are "Good 'ole Boys" with an accent. I guess I could be another Jim, my middle name is James? That's a club I'd like to be part of too. Zama Jim!
-
Special meaning today
-
New front bearings won't go on the spindle
Blue's tip was to polish it with a Scotch-Brite pad. I did that and had no issues that I can remember. Driving the races on square was the hardest part and that wasn't too bad as I recall. Good luck for better results today.
-
The Classic Z Motley Crew
Hell of a good time, 100%!!! Ole Buddy loves car rides so for sure him and Millie? would hang out. He has no balls so nothing to worry about there. He sorta acts like my other dog Jelly, female, very loving and sweet. Thank you Guy, I hope this works out like you and I need it to.
-
The Classic Z Motley Crew
Hell yeah! Y'all can stay with me, 2 hour drive. That would be like a Georgia meet they had a few years ago and everybody drove west on I-20 to Barber's Motorsports track and museum. That would be awesome, right down the street (figuratively). But they'd probably get Road Atlanta, makes more sense now that I catch my breath.
-
Wanted: 240z (preferably modified) - Cash Waiting
That's not that bad. I've owned much worse '72 240 and sold it for $6,000. If that means anything. The best shot for me is under the battery. That can be a tricky spot with the acid eating up the fuel lines. I ran rubber from the slave cylinders location to the fuel filter. Tabco has replacement panels for what you've shown in your pics.
-
The Classic Z Motley Crew
My bad. The red Zs must've been Coffee and Cars or caffeine and cars. Humid, you'll agree! My dehumidifier's pulling 1.5 gallons a day. Thinking of hooking up a hose and run it out my dog's flap door.
-
Hood not lining up correctly
I used the same size spacers, folded cardboard pieces, on both sides and loosened the bolts at the hood hinges to get it straight. Don't loosen them too much though or you'll fight it all day. Learned that the hard way. Edited. Your's look like a fender alignment issue maybe?
-
The Classic Z Motley Crew
Let us know then, please. I'm ready for another parking lot party with Tidy Cat coffee tables. You may want to stay out that way for another day, we're having a sauna wave over here. It's as bad as I ever remember. When they say "it's not the heat it's the stupidity" I know now what that means, stay indoors dumb a s s.
-
The Classic Z Motley Crew
Phone in vote for Virginia or one of the Carolina's.
-
The Classic Z Motley Crew
Happened to me in Memphis! Great guys online and even better in person. Lifelong friends if I never see them again.
-
Meeting Eiji
Maybe a little "southern twang" he's picked up?
-
Meeting Eiji
Is his name pronounced like Fiji? E-JEE? Thanks