240 in OZ

How did it know that the door was open? Joseph

Isnt the "first" silver car done by/for the program owned by Nissan and housed in their hq at Gardena CA? Joseph

Just a guess here; beeper may = deeper?

Hello Carl Are you able to figure this one out. When I put my wipers on they work for the full, correct arc for about the first half dozen strokes, then the drivers side seems to do a longer arc, so long it flips out past the windshield rubber. Turn them off, they return to park. Turn them on and the same thing happens, ie work correctly for about 6 strokes then the drivers side runs long in its arc. Any ideas? It bugs the hell out of me. Thanks JOseph

Hello Carl Thanks for the reply. Im pretty safe in saying that mine hasnt failed in this way :> Joseph

Carl Interested to know how you can tell if a pilot bushing has failed with it installed in the car. Thanks Joseph

FWIW This car was garaged in Melbourne for the 18 years. It was for sale late last year for about $10k. I looked into buying it. I assume that the guy now selling it in SA bought it from the seller in Melbourne. He hasnt done anything to it, maybe the alarm. Joseph

Enrichen the mixture a bit.

You'd be surprised what your local Nissan dealership can provide you, if you know the part number. They dont seem to like looking up part numbers for nuts, bolts washers etc. If you have a part number, there seems to be no problems. Ive even had Nissan Australia get me replacement bolts from Japan. Joseph

300 point concourse guys reading this; beware if you are thinking of replacing all of your old bolts with new, genuine Nissan ones. Many of the bolts I am getting from Nissan here in Australia no longer have the bolt grade stamped into the head, ie 4, 7, 9. Joseph

You think $12k is pricey for this one. It was first advertised about a month ago on another classifieds website for $22k! It was for sale late last year in Melbourne, owner was asking about $10k for it then. I got some pics at the time. From the sellers description it hasnt had anything done to it in this time. Joseph

The 2+2 in this auction has been listed in the Trading Post and on other for sale classifieds websites for several months now. Asking price there was $14k, assumed with the plates. Where is the antenna? Take a look at the hole, it has either been patched with primered metal or had duct tape put over it. Joseph

Hey V12 Yes, I have seen probably close to a dozen RHD 240z's here in Australia which came equiped with the Japanese domestic market bullet type fender mirrors as original/standard fitment. When it came to mirrors, we got a mixed lot here. Regards Joseph

I think the new one as shown in the pics is more for protection of the wiring harness as it passes over the metal of the body. The old one is for sealing purposes. I dont believe they are interchangable. The newer one is as seen in the rear hatch area (remove your inner plastic trim panels). FWIW Joseph

Agreed, but it depends on what you are going for with your car. The high heat paint wasnt that much more than the regular clear anyway. Just by a big can of the Holts stuff and you will have enough. I did 4 coats on all of the pieces. Note I painted mine while the tranny was apart and then touched it up when it was put back together, just prior to installing it. Joseph

Amend my post to bead blast/clear coat using high heat paint, this is what I did and so far it has stood up well. You can also get a flame resistant clear but it is probably overkill. Joseph

Bead blast/clear coat.

Not that I saw. He sells the full length replacement outer skins, ie from top of door to bottom of door. The original/new trims were something to behold though. Joseph

71 was AM only; maybe very late 71 has FM. Try Warren Potter at All-Z Parts for the door trims ans strut caps. He sells them new, genuine Nissan. I was over there late last year and saw a pair of genuine Nissan 240z door trims which he bought over from Japan, simply amazing! Joseph

Hello I have now been able to get some pics of the cover which I am looking for; please see attachments below. I still need to get one of these covers. If anyone can help me out it would be appreciated. Pic 86 shows the top side of the cover, pic 87 shows the underside of the cover, pic 88 is an attempt to show which part of the seatbelt the cover fits on. It is akin to the "tilt to adjust" mechanism seen on more modern day seatbelts. Thanks Joseph

I am currently attempting to restore an original pair of 240z seatbelts as seen on the Australian specification cars. The original Nissan factory belts were removed and replaced with Kagnol brand belts prior to sale. I have two sets and am missing one small part to make a complete single set. I need a metal cover which goes over the adjusting bracket. It goes on the piece which mounts to the rear hatch area. I need one cover. If anyone has one lying around please pm me or reply to this discussion thread. If anyone has a complete set and isnt sure what I am looking for please let me know and Ill try and arrange a picture. Many thanks. Regards Joseph Gauci

Does anyone have a good picture of the spring in one of these ash trays which holds the lid up. Mine is missing and Im looking around for options. Regards Joseph