Patcon

No way to remove that, that I know of. The discoloration is normally caused by delamination of the plastic layer in the middle from one of the pieces of glass. If most of it will be covered I would install it. I wouldn't use a sealant unless the windshield leaks. If it does, you should be able to pry up the edge and squirt it under at the leak locations

I believe one switch has two wires and the only one

@nix240z Steve, Did you ever reproduce these?

I think its easier to put the glass in first

Question: I ordered the S30 door weatherstrips. They should be here shortly. Do they get glued on or does the windlace hold it well enough?

I don't think it will matter if the OD and ID are correct

I tried to find the screws I bought but I can't locate them and I can't find the Amazon order. I'm sure I ordered them from Amazon. Stainless screws. Some of them are surprisingly long. I don't know size or pitch

The testers normally seal just like the radiator cap which seals the port to the overflow tank

If it wont hold air pressure, a spray bottle with soapy water might help You only need about 15#s of pressure for testing

Radiator pressure tester kit. You might be able to rent one at Advanced or O'Reilly's https://www.amazon.com/Wenzhon-Universal-Radiator-Pressure-Portable/dp/B0CGCFJMWH/ref=mp_s_a_1_2_sspa?crid=1Y3GEZC1H9R7L&dib=eyJ2IjoiMSJ9.Zv1uDI4wRuNhnjzVSXnqe6epWI1Tlm2TCYwwUX2EuzkCkrXSzuaODd25gTSdSTd_LASMcJa_XFrk0l_CdwIdM1euxqinKYdGaVqrJuwCfyEAlwtyUYvXsMAHWxHHaUu9kM01qb9d3yRE36ovjHs5ycAahmRenWuN081YpACboBs3x4wuRAc5sjzhXCr55iFRihIQj5OK7AH177O6YGx3Lw.gI0qtQs6WzHwGvreJn6Kk0ttfdK1ZBbDoZqfEQrhqVw&dib_tag=se&keywords=radiator+pressure+tester+kit&qid=1740713681&sprefix=radiat%2Caps%2C142&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRm&psc=1

I have sealed my cabinet well but I still have a number of leaks too. I used strip LEDs in my cabinet too. The waterproof type inside the rubber rib. I buy cheap glass from Home depot for the view area. I think glass might be cheaper than plexi these days. I got some tee handle screws in for making the glass quick change. My next upgrades will probably be the shields that help prevent the media collecting on the ledges inside the cabinet

We have formulated a plan. We'll see how it goes....

My next place is gonna be about a 1200 sq ft cabin and an 8000 squ ft shop. My 1000 squ ft shop is nowhere near enough and I want inside storage for all my cars

Yes, I believe I did. Let me look around

Now you tell me!

https://zcardepot.com/search?q=Heater+hose&type=product#

My plating tank was pretty cloudy so Shelley and I filtered it today I have no idea what this is, I filtered out. My wife thinks it just garbage. She's a chemist. I have no idea. I did plate today but it took a while to get acceptable results. Lot's of brightener. I'm still not pleased with all of it. I bought a 40 Amp power supply last week because my 10Amp just isn't enough sometime. The problem with the 40 Amp power supply is it has no resolution a lot amperages. So for little things I still have to use the 10 amp power supply. I have new zinc anodes coming this week. So I will tweak the tank some more. I tried to plate a carb water bypass tube today. It didn't do right. I probably need a different shaped tank to plate some of these long narrow parts

For brighter, most people go LED but that can add other complications...

I believe there are four bolts holding the steering column up. The dash is pinched between the steering coulumn and a bracket welded to the firewall. If the column doesn't flop around, its not loose yet

I agree the inside of the cups are pretty crusty on some of those. But my thinking was only the perimeter shows after you put the plastic inner cup in. So only the edge of the cup needs to turn out nice...

@inline6 I dont remember, what did you end up doing for carpet?

Yes, surprisingly they are magnetic

0.016" approx thick. They have two small tabs bent 90d on the top edge

I did finally get the diagram to plot. Took a number of different attempts and tactics

I have the precision door weatherstrips. I have had them for probably 10 years. I tried one of them today. That's gonna be a no go!!! I did eventually slam the door hard enough to get it to latch but it still won't sit flush to car. I will order the S30 weatherstrips this weekend