Diseazd

He sent two more....can’t wait to see it trimmed out!

My painter only sent me one pic.......

wioorders@gmail.com You can buy a set from one of our members at this email address. He has an ad in Classic Z. They are $120.00 total, shipping free. A great quality set of floor mats.

My painter just sent these after block sanding....Safari Gold tomorrow.....I hope.

Finally......Our painter is committed to finish my sculpture this weekend. I’ll take him the trim tomorrow and he should be finished Saturday....fingers crossed!

Just received my set of Amco knock off floor mats. I couldn’t be happier...... they are beautiful! FYI Guy

Been there myself.....we used a 73 front clip on the 71 car. You definitely should have a frame guy to assist. Came out perfect!

Definitely gets the most compliments of any of my Z cars.

I agree with grannyknot....post here too. Looks like a challenging restoration. You are very brave on the rusty one.......my favorite color for a Z!

IMG_0100.MOV

I agree with cgsheen1......there is some adjustment in the front lower valence. Most everyone that installs wider wheels will run into this issue. Just futz with the adjustment till you get max clearance.....I think this will solve your issue.

A couple other nice straight sixes.....not mine. Turn the volume up! F3D64477-31A2-4671-83D6-2068CF272EEC.MOV 37FC2E77-88E5-407B-9594-A39AC8B2BEEF.MOV 53A992B8-737B-488B-AA95-5397D7DCBF30.MOV 13E87004-14B7-4637-AB77-AC2B5C335298.MOV

Wow......That’s an awesome sound tuned Z Moelk......doesn’t get any better than that! Don’t you just love the straight 6? Guy

One of my favorite comedians......

That looks incredible Site.......I saw a truck with a commercial cooker in tow on I20 passing through Columbia, S.C. It had a sign that said” You can smell our butts a mile away”.

Just incredible.....maybe going to be the most impressive Nissan in the country. This will bring a new interest in the Z31!

My feelings exactly Jeff. In 1970 and 71, no one noticed the stock Z’s with skinny tires and rolling around the turns. When one came by with front and rear spoilers, lowered and a tuned exhaust music, a nice set of 7 inch wheels, it turned the heads. Some like a museum piece ( not me or Brandon) and that’s ok....to each his own. When you have a Z set up right, there ain’t nothing like it.....you know what I’m talking about ( your race car included). They are meant to be drivers....easy to modify, and a blast to be driven.....thanks for the compliment....why I consider you in the same fraternity as me and Brandon!!!!!!! Guy

IMO nope

Not sure.....I just threaded it on till snug, then threaded it back to the tranny, threaded it on there and amazingly it worked! Just get it squared up and it will eventually go on. (Scrapes on my arm to show how contorted I was). The job stands out right up there with removing rear driveshaft bolts and control arm pins in difficulty!

I just did my 73 this weekend. Disconnect the transmission end so you can pull loose cable at the speedometer. Feed the cable in the firewall and then reach your hand up behind the speedometer to feel the threads. Now, pull the cable in and try to bend (coerce) the cable so it’s approaching the threads squarely. Now, push the threaded collar onto the speedometer threads and just keep spinning till the threads grab. The secret is to make sure you are square. One of those jobs that really suck on getting done on a Z.

I would definitely go with the SU’s. They are so simple and absolutely no problem feeding your set up. Get Ztherapy to build a set for you. They do a great job on my 3.1 Stroker Motors.

Me either Jeff.......I’ve never replaced rear bearings. My motto “ If it ain’t broke, don’t break It”

Wow.....what a great idea.....no idea why it wouldn’t work!

I call this green .......

JSM.....They all are a joy to drive....the silver and green cars have Stroker 3.1 Motors.....hard not to climb into one of those when I need a little lift!