bpilati

Did you go through the process in the engine service manual to adjust the sprocket to the next setting (i.e., 2 or 3)?

https://www.thezstore.com/product/6104/solid-shifter-pin-bushing-set-72-81-240z-260z-280z-280zx-non-turbo-w-manual-trans

I'm not well versed, but this problem seemed to have become quite relevant with the 73 flat-top carbs. An electric fuel pump and the insulation was added to mitigate the vapor lock issue.

What do they do, or are they for appearances? Which model Z?

Are the diameters different?

I guess I've been pretty quiet, and should be a better admin. I joined back when the Internet Z Car Club @Carl Beck mailing list was giving way to forum based websites, and Mike started the CZC. The various Z models through the 300ZX were finding themselves forming separate discussions based on the old IZCC mailing list filters. The IZCC site still has some of the best Z data pulled together in one place, and should be placed in a vault so it never gets lost. 😉We should all be grateful that Carl got many of us together back in the 1990's, and gave us our first place to find friends of common interests. I'd like to thank @Mike for his consistent effort in creating, maintaining and updating this site for almost 30 years behind the scenes for free out of his own pocket, for the love of the Z. We're looking for sponsors.

I just saw at 1982 280ZX list on Facebook Marketplace near me.

Does it last for 20 years?

I mean both, but better to remove wipers and pull cover. I had this exactly problem. We welded a patch in the floorboard at that spot to repair it. Also repaired the holes in the cowl around the air intake. So the water was leaking down the inside under the carpet so you couldn't really see it.

Check the area under the cowl cover where the wiper motor is. The air intake tends to rust out under there allowing was to run down the firewall to the very spot where your rust hole is. If that is rusted through you'll need to repair that as well.

I'm not going this year. Been to Nashville a couple times.

I think Dave is back making his kits, at least sort of.

They have Koito on that link for Toyota.

I know Dave's stuff, I have some of the harnesses on my Z. I don't know about switching needs for these lights, but I assume they're selected because they will work on early Zs.