misterL Posted September 22, 2016 Share #1 Posted September 22, 2016 Hi everyone. Unfortunately the guy who was painting my car lost two of the flat tips for my trim molding (picture attached). I'm in need of at least two of them - does anyone have any for sale? Thanks! Link to comment Share on other sites More sharing options...
zKars Posted September 22, 2016 Share #2 Posted September 22, 2016 There is commercial source for these, and it has been discussed here a year or so ago. Sorry can't find it at the moment, just to give you hope that you may be able to find them. Link to comment Share on other sites More sharing options...
misterL Posted September 22, 2016 Author Share #3 Posted September 22, 2016 Thanks. I found a few listings at zcarsource.com but they aren't in stock and didn't have the type I needed, unfortunately. Link to comment Share on other sites More sharing options...
siteunseen Posted September 22, 2016 Share #4 Posted September 22, 2016 Looks like the "chisel tip" on here. https://www.customautotrim.com/body-side-moldings/rivet-on-molding/tip/82/ 1 Link to comment Share on other sites More sharing options...
Gr8tful240Z71 Posted September 22, 2016 Share #5 Posted September 22, 2016 I will be looking for one too soon because my body shop lost a tip as well. Makes you wonder doesn't it? He tried telling me it was not original so I should just remove all the trim. Of course he would say that. If I can't find one I might have to. remove mine reluctantly. Please let me know if you find a avenue to getting these parts. I'll do the same. I'm not ready for paint yet so I just might have to eliminate the trim, unfortunately, if one can't be found. If that's the case for me, I might have one for you at least. Good luck .Sent from my iPhone using Classic Zcar Club Link to comment Share on other sites More sharing options...
misterL Posted September 22, 2016 Author Share #6 Posted September 22, 2016 Oh wow, Siteunseen! Those look like the ones! I'm going to order a couple and I'll report back on this thread whether they're the right size. Thank you! Link to comment Share on other sites More sharing options...
Patcon Posted September 22, 2016 Share #7 Posted September 22, 2016 4 hours ago, Gr8tful240Z71 said: He tried telling me it was not original It is my understanding, none of the cars left the factory with the rubber bumper strips on the sides. That was generally added later or by the dealer before the sale 1 Link to comment Share on other sites More sharing options...
siteunseen Posted September 23, 2016 Share #8 Posted September 23, 2016 Here's my dealer add on side trim ends, '77 280. Link to comment Share on other sites More sharing options...
borini63 Posted September 27, 2016 Share #9 Posted September 27, 2016 Do you have better picture of what you need....I am parting a couple Z's with that trim..... Jamal Link to comment Share on other sites More sharing options...
misterL Posted September 27, 2016 Author Share #10 Posted September 27, 2016 Here's a couple more images showing the pieces installed in the molding. Let me know if you have any - thanks! Link to comment Share on other sites More sharing options...
borini63 Posted October 4, 2016 Share #11 Posted October 4, 2016 (edited) Pm me your shipping address, you need the short ones, right? ....I will send you some. Jamal Edited October 4, 2016 by borini63 Link to comment Share on other sites More sharing options...
misterL Posted October 4, 2016 Author Share #12 Posted October 4, 2016 PM sent. Thanks so much! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now