All Activity

Mine were more crud from leaving old gas in them for too long. The tanks were good and solid after I pressure washed the outside of them. That muriatic acid made the inside like new but after sloshing around for 5 minutes I had to pour in about 3 gallons of mixed ahead of time baking soda and water to neutralize the acid then emptied that into an empty 5 and killed a lot of ant beds around my property. Then the acetone to remove the water, quick hit with the leaf blower and then the Red-Kote. Sloshed that around completely covering the tank and let that drain out into another 5 then direct sunlight for 30 minutes, then another round with the leaf blower. Then I put that bitch on a shelf and got drunk.

What would you say the success rate is. I’ve seen both results reported here. The overall condition of the tank is probably going to be the deciding factor. I had my tank redone at a shop, keep in mind you’re at their mercy as far as the job you get. At the end of the day my tank began to leak from minuscule rust pit holes. That’s when I decided to purchase a new tank. Again it’s all about what shape your tank is in and you really won’t know until you remove it.

I borrowed ideas from these two guys and added a few of my own from past motorcycle tank plus the instructions from Red-Kote. https://atlanticz.ca/zclub/techtips/fuel/gastank/index.htm https://woodworkerb.com/home/datsun-240z-rebuild/240z-fuel-tank/ https://www.damonq.com/techsheets/red-kote.pdf

I've done two tanks and it's not hard. You have to get everything together and plan it out as things have to be done pretty quick. 10 years ago it was $50 for all the chemicals. The only thing is letting it cure for about a month, most important. So if your in hurry to get on the road buy a new one. If not clean and coat it yourself. A gallon of acid, $5, couple boxes of baking soda, $5, gallon of acetone $10, quart of red-kote $30. Plenty of empty 5 gallon buckets and a leaf blower.

You can also bench test it before you reinstall it. Quite a few articles here on the site referencing that.

@Mike That Land Cruiser is Sweet! I’ve been looking for that exact model in Pristine for a while. If you ever decide to get rid of her please let me know.

Go down to the "Push Rod Considerations" section of this link: https://www.evcreate.com/installing-the-ibooster/

Submerge the sending unit in CLR (calcium, lime, and rust) for 24 - 48 hrs. It will come out clean and usable.

My parents were partners in a Toyota dealership so I’ve always had a Toy in the herd.i have a Tacoma that I delegated to shop truck a few months back after the Only Fans girl across the street backed in to the front of it. We have a Lexus NX350 as well. Love your Landcruiser but that BMW is 🤯

Good thread! I get to pick my DD based on need... 2000 Lexus LX470 (Landcruiser) But mostly drive this daily: 2014 BMW Z4 (E89) Manual

We have a thread for guys who daily drive their Z car. But it occurs to me that those of us who love the Z, probably daily drive something pretty interesting as well… This is me. I’ve owned Z cars longer, but became a Porsche guy along that path. (I have 5) my daily driver is a Porsche Macan GTS. 400HP 0-60 in 4.4 seconds. Numbers that don’t mean a thing in traffic. But, it’s great to be able to kick it down and humble the Kia’s trying to do the traffic weave. So comfortable too… 8 years old, 40K miles. I love every minute of driving it. Only downside is all the freakin’ buttons you have to press to get everything the way you want it. I rationalize though that it isn’t unlike preflight when you fly a plane. What is your daily?. 🤓

In its native installation, it can be more complex. I think the brake pedal has position sensors. Not sure if that is a safety thing. It could be redundant feedback. Similar to drive by wire with sensors to measure gas pedal position and throttle position.

Yes, for the hand throttle

Either he's making it harder than it should be, or this is not a conversion for the faint of heart.

Here's someone adapting the iBooster to a Z32.

I remember the vendor, 'Auto World', from back in the 1960's (I still have their 1965 catalog sitting on my book shelf). I didn't realize that they were still in business. The website pays some homage to the original operation, but doesn't make it clear whether there's a historical link between 'then' and 'now'... "Oscar Koveleski founded Auto World in the basement of his home in Scranton, Pennsylvania in 1958. The small mail order hobby business grew to great proportions and became known for its annual product catalogs, which were filled with every car-related item an adolescent hobbyist might desire." The current iteration of Auto World is based in South Bend, Indiana.

I just used the link that Zkars provided in his #2 post. The Gyraline website currently features their Black Friday deal and offers the option of having the price displayed in the currency of the customer's location. IIRC, I had to select the 'G1' (iPhone) or 'G2' (android) product first, add it to my Cart, and then go to the Cart to see the price. I tried this posing first as a Canadian customer, and then as a American customer. The quoted price in Cdn $ for a Canadian customer was significantly higher (numerically) than that for an American customer -- but maybe that was purely the result of performing a currency conversion. Additional costs for shipping/handling and duties/tariffs might get tacked onto the Canadian price afterwards and not become visible until later in the check-out process. A quick internet search indicates that Gyraline was incorporated in Delaware in March 2024, with operations based in California and Texas. I have no idea where they do their manufacturing. Given the the nature of the design and the relatively low production volumes, it could be as simple as contracting out to a US-based additive manufacturing company ('additive manufacturing' = commercial-grade 3D printing).

Good question (and my mistake). The research project that I reviewed involved the development of an app for a smart watch.

@siteunseen THANK YOU! This is the kind of info I was looking for. Much obliged.

My 12/70 has the flapper. And I'm REALLY late to the party! I just picked up an air cleaner housing that only has one hose barb coming out of it (I'm assuming it is for the valve cover breather hose?), has the filter retainer ring on the inside of the filter and there is no sticker, but has sticker residue on the top. What sticker would have been there, and what production dates of cars would have come with this style of box? Jan. - July '70 cars?

Looks fantastic. That is almost identical to my end goal for my early 260, wheels and all. Which silver paint code did you go with? I'm thinking about Porsche arctic silver for mine.

Dang, that is pretty cool. BRE livery one of the greatest all-time in racing.

So is this coming from the US or from Canada? Where did you find the black Friday deal? I could see doing this. Ive done 4 alignments in the last twp months. That would have paid for most of it. And at market rates I would be money ahead...

What I have...the red/blue are flat head, the blue/clear are philips, and the black/clear are torx. This seems to be the standard from what I've seen in stores for decades. Maybe some older tools were different.

S30.World I wouldn’t give it another thought. Many folks on this site have purchased tanks from them including myself and were very satisfied.