Topics Last 30 Days

You said 20plus. You had the right thought though. If you watch the trailer, Bueller's character describes how the goal was to create a computer that can "learn" from its own mistakes. Like not ending a sentence with a period. Weird how this AI turned in to a troll though, trying to dish out insults. Most of the AI on things like Youtube comments, is weirdly happy and complimentary with numerous emojis. We're headed for stranger times.

Are you sure the horn switch isn't stuck? The control side needs to be grounded to actuate the relay. Seems like that would have to happen before it could get "stuck". It's on the relay bracket.

Built my custom 86 Z31 300zx over 4 years. It took best in show from Pit&Paddock/Meguires at SEMA 2021. The inspiration for my build was the 240z my dad and I restored together. A car that I found as a teemager back in 1993. My dad finally acquired his last dream car, a white on tan 993. Only problem was, he ran out of garage space. He was planning on selling the orange car but just couldn't bring himself to let it go. So he made me a deal I couldn't refuse on the safari gold car. Amazing to have both cars together!! " " " " " " " " " "

If a sermon could save even one soul it would be worth preaching. I think you'd find - if you gave it the benefit of the doubt - a smattering of eager listeners in "this crowd" who would appreciate the chance to hear what you have to say. If we don't deserve it, then who does? You might look at the current exchanges on this forum and see members eagerly conversing with what appears to be an Artificial Intelligence 'bot, but over the years some of us have drilled pretty deeply into the story of these cars, the people and circumstances behind them and into their very fabric. I can think of few other open source platforms where this has been made available in the English language. Hopefully (!?) much of that still exists here and is - with effort - searchable for those who are curious and/or passionate enough to know. At the very least, put it out there before you can't. Pro Bono. Thanks.

280ZX Brake MC is ready to go! I tore this apart several years ago thinking it would be a short project, but the rebuild kit I had turned out to be for the one made by Tokico (large perforated disc residual valves) and this one is made by Nabco (small rubber duckbill residual valves, see below). I had messed around with trying to rejuvenate the reservoirs. I had read you could cover it in a solution of oxy clean and hydrogen peroxide gel under UV light for 24 hours and it would take the yellow out. It lightened it up, but they’re still clearly yellow. Super clean, though. I also did some chemistry on some of the hardware. The bleeders and reducers for this thing are not common sizes (the reducers are m16x1.0 to m10x1.0) and after two weeks of searching for replacements I gave up and decided to try chemically coating them. I didn’t want to do the hardcore hot bluing or zinc methods because of the chemicals, so I used the rust bluing method. Basically, you soak them in white vinegar to strip off the rust, zinc, and anything else on them. Then you paint them with a paracetic acid / salt solution (8 parts hydrogen peroxide:1 part white vinegar + as much salt as it will dissolve). Dry it with a heat gun and throw it into a double boiler. You’ll see the rust turn black, which is when it turns into iron oxide. Buff it with steel wool and repeat until satisfied, then soak for 24 hours in motor oil. They came out okay. I was hoping they would look more like the pistons, but this is what they look like after four rounds of the process, so it’s going to have to be good enough. Fingers crossed that they don’t just immediately corrode. You could also do the phosphoric acid version (cold bluing), but this makes a harder coating of iron oxide. Then I just had to hone the cylinder, flush it with 91% alcohol, wipe it out, and reassemble. I kept the Tokico 240Z reservoir caps since I didn’t wire the car for ZX caps (PN: 46020-U6701) with the fluid level sensors and don’t have the metal (PN: 46020-K2401) or plastic (PN: 46020-N6000) Nabco caps. Maybe later if I can find a set for less than €53.40. It looks pretty good after test fitting it. I’m waiting for a dust cover and O-ring in the mail, then I can install it and bleed the brakes.

So, on the All Activity page, you can click on anything and it will take you to the end. So, this would be the page to start from when not signed in. But...the page lists all posts instead of all Topics. so there's really no need to click through since they're all right there in the list. Oh well. https://www.classiczcars.com/discover/

Will do, thanks for the photos. it is a very nice looking oil pan.

Not so much trained but he does what he wants and gets what he wants I guess by just paying attention. He's the reason I get out of bed, his name is Rolex. I know what he wants and he knows what I'm about to do and runs and hides under the bed. Hates baths and toenail trims, cleaning his big ears are a weekly fight too. But I can't imagine my life without a good dog. So yeah I guess he is trained but I didn't do it, he did.

Knowledge of 240Z wiring.

They all are, my friend. They all are. ☺️

Another way is to go through the tachometer opening if your hands are small enough.

Never mind. I erased my internet history and the problem went away. Didn't know that "cookies" could do that. I think I had clicked on something by accident. Back to original programming...

I am located in Austin TX

We have some AI on here already, "why won't my car run as I think it should" 10 years going on 20.

I've looked into that. The costs into manufacturing it aren't light from What I've seen so far. I will have another look.

The door latches I used Tail light chrome pieces. They weren't very flat. So I heated them slightly to reshape them. I did cause some wrinkling in the finish on the one that was pretty warped. I probably should have sent them back and exchanged them but for now it's fine Bought some washer to hold the trims on Installed Some butyl to hold the lens in The center post of the chrome is supposed to be long enough to go all the way through the back and get another star washer. The posts on my repops aren't long enough for that. So hopefully the lens don't fall out Felts for the bottom lens drains Shop dog More Belmetric Lights in place Finishers Badges, because everyone knows badges make cars run better!! ;)

Yeah, I like that Turbo 930

My '77 has that wide B like you're talking about and I got one out of a '79 2+2 that I put in my '72 and am really happy with it. Never use 5th around here but it's a game changer on the interstate roads.

I could sure use a 3d print file for the vertical base part of the mirror

I thought that was the name of the Farmers union?

Nice and clean very pretty i just wet myself....

Post up the serial number and any information about mileage. And if it's complete: carbs, manifolds, air pump, etc. Might have value to somebody restoring an early 240Z. Also, on the 4 speed, whether or not it's a "monkey-motion" transmission or the later style. If it has the clutch parts too, that might help you sell it. Good luck.

Selling Datsun 240z rear taillight trim for $220 USD or $300CAD on ebay.ca. Listing: https://www.ebay.ca/itm/376366931004

I typed some of this into AI to see what it said, and it came back with a lot of stuff, but the main thing was: However, you can search for a compatible replacement. Look for a 4.1945 MHz (or 4.194304 MHz, which is a common close frequency, as 222/106approx4.194304) crystal oscillator with similar package, voltage, and output characteristics. You'll need to know the pinout of your existing oscillator if you want a direct drop-in replacement. You could measure the voltage on a working one to get that, but the other specs would be hard to get without a datasheet.

Do i still need to pull the water pump to inspect and flush the radiator to determine if its blocked somewhere? 20250625_170637.mp4