Leaderboard

Wait... I'm supposed to have straps under the seat bottom? So THAT'S what those stiff crusty things hanging down were supposed to be!!

Well I wanted to get back to posting here so this will keep me busy posting . Years ago I had a friend that had this car sitting at an apartment and it was about ready to get towed off . I offered him all my money in my PayPal account ( 800$) even though I didn’t have a place for it . It was sell it or lose it and he was just glad it didn’t get hauled off . My garage(workshop) wasn’t even done yet but there was a z waiting . This was 2017 . A year later I had surgery on my back so it sat around for a while . It was a complete car with a blown engine . It sat outside for years To be continued

@Captain Obvious You have a GPS on your flip phone?!!

The fuel stabilizer will probably be good enough for now. I'd suggest taking it out on the road for at least an hour to work out all the issues that gasahol creates. Maybe even pump in a few gallons of fresh fuel into the tank, depending on how much fuel is still in there. FYI, when any car or internal combustion engine sits for 4 weeks the fuel and alcohol separate and the alcohol attracts moisture (water) which goes to the bottom and sits. This happens in the fuel tank, in the pump, in the fuel lines, in the carbs or injectors and so on. I don't think that I have to explain what happens with the water in the fuel system. For a fuel stabilizer in the future, there is only one product to use and it's not Sta-bil. That's an ok product and it keeps the fuel stabilized for up to 1 year but there is a product that is waaaaay better and most of you have probably heard of it. It's called Seafoam and they guarantee it to keep fuel stabilized up to 2 years. I'll take that a step further by letting everyone know that I"ve got first hand experience with the product and I've seen it keep fuel stabilized for over 4 years without any problems. I haven't checked my 79 620 fuel for over 2 years now but it was ok 2 years ago and I parked the truck in 2018 after I seafoamed the gas. My 75 z sat for 4.5 years and I put Seafoam in the gas the day I bought it in April 2018 and didn't start the engine until August 2022. I checked the fuel first and it smelled fine. Two days after I got it started I took off for the Olympic peninsula with it and drove it all over the place without a problem. Still driving the car today. By the way, Z Specialties is alive and well, I never have closed for good, only the past locations were closed for good. I work out of my home now part time and I don't have any employees. Z man of Washington

I went with a $70 power window unit that can be gotten on Amazon (JDMSPEED) or eBay. I know that regardless of the vendor, they're all made in China and probably by one particular company. They may change the color of the plastic parts for a large order from a distributor, but they're essentially all the same. I'm revising a tech article on installing the power windows but likely won't have in on the CZC site until later this fall.

Make it easy on yourself. Attach a ring lug to your wire and attach it to the alternator. Be sure to use an inline fuse to protect your wiring.

I think that the common high pressure electric fuel pump uses steel rollers in a steel cage. I took an old one apart once. There are other designs. The old Z fuel systems are pretty leaky. They let moist air in to the tank. The gas filler cap vacuum relief seals are usually shot. Wouldn't be a surpise if you had condensed water n the tank and the gasoline has dissolved water in it. Gas will hold some water, especially ethanol-containing fuel. If you don't want to drain the tank it might be worthwhile to use some HEET or other dewatering agent. https://www.goldeagle.com/product/iso-heet-fuel-line-antifreeze-injector-cleaner/

Oh wow, that's an interesting way to do it. I always used the air tool to synchronize the carbs. But this gives an extra visualization into the fuel used as well.

Looks like constant hot by the diagram. It comes directly from the fuse block and has a ground. Not sure what you're working with or if it's together or not (why not just check with a test light or meter?) but if it's apart you can check continuity back to the fuse block, or if it has a fuse in place, check continuity back to the positive battery cable end.

VR1 10W30 $26.97 5 qt. jug, new filter $8 at Walmart. Cleaned and gapped ngk plugs $0. Adjusted valve lash $0. Idles smooth as glass. Took maybe 2 hours. Satisfaction for myself, PRICELESS! Beer:30 now.