Everything posted by bryantatem
-
my new 240z website
VERY IMPRESSIVE!!! Great job on the car (and the site too)
-
Emblem Missing ?
Well, mine is a early 72 and it WAS an auto... NO BADGE. Origional hatch. I bought it from the origional owner.
-
? Centerforce 1 or OEM Clutch? Which to Use?
I would go Centerforce again and again. The extra money you spend there will pay for itself in the length that that clutch will live vs a stock one. And the performance difference... WOW!!! You'll like it.
-
Emblem Missing ?
I would bet on a dealer nameplate...
-
Throtal Body Spacers???
That is the way they are susposed to be. Make sure there are no vacuum leaks in them.
-
Fuel Pump Upgrade?
7MGTE is a Toyota Supra Turbo engine from a MK III.
-
Removing Louvers
You just unscrew the louvers and then it will come off. The mounts are kinda just shoved under the weatherstripping. You can just pull it out. Use water and some dish soap as a lubricant and it will slide out easier.
-
Exaust System & Cat Converter
a CAT converter is NOT required on a 71. It did not come on it when it came out from factory.
-
my 240 is very very sick......:(
This might sound stupid, but do you have the firing order correct??
-
part of the prob with eBay
Well, it does take a lot of extra time to have it boxed. You know it is really hard to do. And boxes are so expensive too.
-
Purchase/Restoration/Mod -- Where to start
You can get started wherever you need the most help. There are a LOT of good people here. Just tell us what you are needing, or give what you can offer.
-
Transporting
If it is a standard, just put it in neutural. If it is an auto you have to remove the driveshaft. Also, the only onter problem I have found is make sure the rockers clear the drive on ramps. This has been a problem for me in the past. The dollie I use now has removeable ramps and U Haul's are good. (And pull nice too)
-
Touching up the Console Lid
Yes, nail polish works REALLY good. Nice fine brush and a good selection of colors too. Really nice for trim and interior stuff.
-
Radiators
Instead of going that way, get a oil cooler. That will help you more.
-
Help!!! I want to go from an auto to manual...
I found that the bracket for the pedals worked fime for me . All I had to do is unbolt the old auto brake pedal and bolt in the new pedals. WORKED FINE IN MY 72
-
Help!!! I want to go from an auto to manual...
Well, it is not too hard to do actually, just a pain in the arse. PARTS LIST: Transmission Manual starter Clutch kit (I suggest a Centerforce) MSA sells them Pedals - both the brake and clutch (I have a set) Flywheel with bolts (I have that too) Clutch Master Cylinder (bolts right in) Slave cylinder rubber line to slave cylinder medal hydraulic line pilot bushing for the crankshaft (autos did not get one) I do not know if the driveshaft is interchangeable??? Also the rubber boot for the shifter and actually the center console is different, but I just made me a custom outer shifter boot. Works great and is a BUNCH cheaper than a new console. That is most of it from the top of my head. Let me know if you need any more help. Also I am in San Antonio (not too far from you) if you need visual help.
-
Dash mat
Well, the dash mat like the one you'd find at a nice place like Pep oys is a scrap of carpet that will be glued or velcro ed to your cracked dash. The dash covers from like MSA is a piece of plastic that actually covers the dash to make it look like a factory dash.
-
Egr Seal
It might work, it might not. It might hold. it might not. Just depends on MANY factors. The way I look at stuff like that is: -How much does it cost to fix it right? -Will it take longer to fix it once right or many times to patch it up? -Will it cost me more in the long run? (both in time and money) AND THE BIG QUESTION -Will it F%$# something else up that costs a lot more money?? (like the entire engine)
-
Vote on a Wheel!
I have the same one as 2MANY. I really like it myself. feels really nice and it is flat on the bottom, doesn't squish my manly muscular legs.
-
SU carb's
when you fill it there is a bubble created and it has to pop. Therefore it will now be low.
-
SU carb's
I have always used ATF. Works GREAT & CHEAP!!!!
-
Anyone Know This Car?
It looks really nice to me. Same color as my 71 (late) I like it.
-
hmm
http://www.darius240z.com/ WAY COOL!!! I want one too!!
-
Z availablitity
I myself have 2 240Zs. I am about to move to a small town just south of Fort WOrth Texas. Talk about being looked down upon. I don't even own cowboy boots. I also have a Nissan Pickup. I already feel like an outsider.
-
anyone know any good datsun salvege yard in tx.
What is it exactly are you looking for???? There are a lot of parts available right here.