texasz

I can also tell you the best non-eBay location to get a tranny from...ME!! I live in Cedar Park and have a 4-speed in my garage I pulled from a running parts car a couple months ago. Let me know if you want it (shoot me a PM or email). Don't forget to post pix of your new car!! Heck, maybe I'll get to see it in person.

I think that they typically go for about $100 per set of 4.

Here's another thread discussing the same thing. http://www.classiczcars.com/forums/showthread.php?t=5210&highlight=engine+stand+bolt+size

:tapemouth :tapemouth :tapemouth

Gary, your link will not work; actually it's not a link but even when copy and pasted it will not work. Here's another thread where some discussion about what diff came in what car has been sumarized. http://www.classiczcars.com/forums/showthread.php?s=&threadid=1568&perpage=15&pagenumber=2

Sounds like what I stated in your other thread. How many places did you post this question? One is enough...

There are more than 4 bolts holding it to the block. I can't remember exactly how many though 6 or 8 as I recall. Are the engine and tranny in the car?

Go to this site and scroll down to rollbars...there are several pix here. http://www.pape.ws/allan_and_rosanne/Z-Car_Stuff/

Glad to see you found the site and got your question posted. I'm sure that there are plenty of people here who know enough about these to answer your question. I don't know who they would be but I know that there are some like Carl Beck who just seem to know a lot of the history and various parts for these cars.

After striking the deal with the seller for the one I am getting the above referenced post was my first stop and I already have DJACY's agreement to shoot me a copy of the installation instructions. I'm two steps ahead of ya.

I knew it! When I was going back through some old eBay auctions last night I saw this one where I didn't win and immediately knew that it was you who did win. *DRAT* Congrats on the win! A great item at a great price. I did ask the seller previously and he had no others.

How quickly do you want this done? I have a friend in Houston who reverse engineers things for a liveing and could ask him to work on this and whens it's all done it would be in CAD with exact measurements. Hmmm....maybe I should do like Mike with the glovebox and just make some of these and sell them.

Seller set the price...I just jumped all over it like white on rice!!!!!!

Sure...I got it for $70 + $15 S&H. :bandit:

Go look at them. The black plastic part on the top unscrews has the dip-stick attached to it. This is where the oil is and how you check it's level. People use all kinds of oil in there so you'd best wait on more knowledgable people to answer that question (I have hears of ATF being used though).

My new (to me) tanou cover! These things are darn near impossible to find...I've been watching for one for quite some time now and have only ever seen two for sale (not counting the one a fellow member sold late last year). http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4526378560&rd=1&sspagename=STRK%3AMEWA%3AIT I can't wait until it arrives! I love these kinds of rare parts. Now all I need are a good set of installation instructions...DJACEY??? I know you got one late last year from a guy in the US and it included a clean set of installation instructions...would you mind making a copy and emailing them to me? Or anyone else who happens to have these?

Do you know if the seller has more or others? I need the 1970 and 1973 FSM; I already have the 1971 and 1972 ones. As for the copies...be careful what you ask for...that's illegal...copyright and all.

Probably talking about MWZ (aka. Chloe) and she's gone forever. Please do not make this into another thread about her and that situation...I've read enough about her. She's gone, let's just leave it at that unless you want to search out the thread that discussed it in depth (order a pizza and a six-pack first as it's a LONG thread). FYI: I believe she was selling them for $150, I had asked her at one time what her price was because I wanted one...errrr...ummmm...still want one.

It went up to $5300 before the seller cancelled all the bids and ended the auction. Here's a link that goes to the auction: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4523480325

I have a dash that anyone is welcome to for a few bucks. It's from a '73 240Z but will fit all 240Z cars and maybe others. Don't get your hopes up, it is not in great shape, here's a link to some pix: http://www.pape.ws/gallery/DashandRelatedParts You give me a few bucks for the dash and cover packing & shipping expenses and it's yours!! If anyone wants it please PM or email me. If nobody wants it then it will end up on the crusher with the rest of the car.

Another option could be to weld up the holes on a standard 240Z bumper and have it re-chromed. I watch way too much Overhaulin' :devious:

So what I'm hearing is that Mikuni is the way to go. Is this correct? I really surprised that more people didn't chime in on this thread.

I have a new Oxy/Acetelyne set up that I bought in November and have yet to light it up. I have no clue what I'm doing as I have never welded (I used a torch once in '87 to cut some rebar but someone else set it all up all I had to do was cut). Anyone in Austin want to come over and teach me? I have a parts car that is all rust...we can have some fun cutting and welding.

I am looking at buying a set of tripple carbs for use on my 3.1L stroker build and would like to get some information on the different set ups available and why one may be better than the other. I have seen that we have Webber, Mikuni, SK, Dellotro, and now something called OER available to us for our L6 engines. Can anyone help hit the pros and cons of each of these inlcuding parts availability, ease of working on them, tuneability, performance, reliability, etc? I really need this info in the next day or so to begin making decisions on what I want to buy.

There was a thread a while back that had their info...searching....found it. http://www.classiczcars.com/forums/showthread.php?t=14974&highlight=sunbelt Please be sure to share your findings with us all here.