Everything posted by Inf
-
Coolant system chemical flush, recommendations?
Here's the story: Original 2 row radiator sprung a leak where the core attaches to the upper tank, so I bought a 3 row unit from MSA, as well as a new water pump(for good measure), 160 degree thermostat, and some new radiator hoses. The inside of the block and head have a lot of hard deposits in the water passages. I am thinking these are just deposits from using crappy water/coolant in the past since they look like calcium deposits that you sometimes find in old water pipes. Now to my question: How can I clear out some or most of these deposits? There isn't a radiator or water pump on the car right now, but the old water pump seemed to have blades in perfect condition(so maybe i'll use this for the flushing before swapping). If I put everything back together with the new(non-leaking) radiator, and get one of these chemicals you run in the system for an amount of time, would it likely cause a build up in the radiator? What kind of flushing agent would you guys recommend? The amount of buildup seems like it might be affecting the heat conduction into the coolant. Just flushing with water didnt really do anything to these deposits
-
brickyard350z
I may not own a 350z, heck, I wish it didnt carry the Z title since it isnt really of the same breed as the original 240. That's no reason to dog it like datto_240z did though. I can still recognize a nice car and a nice photograph, even if it is not one I am an enthusiast about.
-
Looking for custom front bumper...
That was custom made iirc, I don't think you will find the exact same design anyplace. MSA sells some various airdams and such : http://www.zcarparts.com You should probably order a catalog since their online store is far from complete.
-
roadside
- passenger view
-
Roll call for DFW members
Didn't see this thread until now Yeah, I live in the Duncanville area. I have an orange 1972 240z, it's out of commission at the moment because of some cooling problems (you know something is wrong when you suddenly start overheating when it is 40 degrees farenheit out!). Currently waiting on a bunch of parts from MSA. As for ZCOT, I haven't been out to one of their meetings yet, since they meet on the other side of Dallas from me, so it is a pretty good drive up there. I'm usually fairly busy with school except during the holidays.
- rebuilt cylinder head
-
Chrysler ME-412 Concept Car
I am not too fond of the new mustang, I feel like it cheapens the original some. I don't like the trend of making 'retro' style cars, seems to me that we will get sick of them even faster than a good original design, especially in this case since mustangs are so common. However I like the new C6 corvette, the body style appeals to me much more than the C5 did.
-
long way
-
Fuse Box Spray Coating
I think seerex is asking what type of spray coatings are available for the metal contacts so that they do not corrode and get hot in the first place. I have seen small spray cans of a plastic/rubberized coating (which is what you are talking about I assume) that are intended for spraying onto battery terminals(with cables attached, to seal it off). This might work for the back of the fuse box, where things don't need to move. I can't see it working for the business side of it though, since you would break the coating every time you needed to swap a fuse. I think I may have a can of it out in the garage, I will go look and see if I can find it later. To keep the front of the fuse box clean, there's probably something you could buy at an electronics store that wont break the connection yet sit on the surface of the fuse clips, but I don't really have much experience with this...
-
Isn't this enough to cause nightmares...
Feeding it dogs may seem inhumane to us Americans, but we are very different culturally from Indonesians. Many in India may think our mass consumption of beef is inhumane or barbaric, but to us it is business as usual.
- photo from last winter
-
Air conditioning
Does anyone know the differences between the MSA kit and the one Courtesy sells? http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=240Z-AC The courtesy kit is about $85 cheaper
-
A book for your Xmas list
My parents owned several american cars in the past (oldsmobile, chrysler, plymoth, ford) but decided needing a transmission/engine overhaul at 100,000 miles wasn't acceptable! They now buy only Toyota and are original owners of a 1991 Land Cruiser and a 1997 T100 4x4. The Land Cruiser has over 260,000 miles, the T100 has around 160,000 and both are still not burning oil and are still going strong. That T100 is hands down the most reliable truck I have ever seen or heard of (knock on wood!)
-
Who has the fastest 240Z?
as for 1/4 mile, probably one of these Zs with a V8 and a bunch of other american driveline components swapped in and modified, but at that point I wouldn't really call it a 240Z anymore. I suppose the answer would depend on what you would consider to still be a 240Z.
-
280Z vs. turbo grand prix
racing on the street? more than 1/4 mile = 100+mph on public roads? I have to say that is very irresponsible, maybe you should get your friend to meet you up at a track... There have been plenty of local stories of innocent bystanders being killed because some street racers thought there was "no traffic at all."
-
fuel pump making loud ticking noise
Is it a mechanical fuel pump or electric? That might help someone that knows better than I give you some advice. I don't want to derail this thread, but while we're on the topic : my mechanical fuel pump makes a ticking noise also, but I cannot notice it when it is running. It ticks for a good bit after shutting it down after warming up on a good 30 minute drive. Should I be concerned about this or is this normal?
-
Interior rear tail light panel, how should it be attached?
Thats what I suspected! I'll have to make a trip up to courtesy for some stuff soon anyway, guess ill get a bunch of rivets while i'm there. Thanks
-
Interior rear tail light panel, how should it be attached?
After going over the car replacing things that need to be replaced I've come across a lot of the previous owners "creative" solutions (substituting random fasteners is the big one!). The interior tail light panel on my car is screwed down with some silver/chrome screws that don't seem like they belong there. This seems like a place for some plastic rivets, not a screw with a pretty long pitch and a point at the end (to my untrained eye at least). On top of that, the holes these screws attached to underneath the panel didnt look like they originally had threads at all. I looked over my FSM and the microfiche CD and couldn't find a diagram or description of how it was originally held down. Could someone tell me if this is the way it is supposed to be, and if not, what SHOULD be holding the panel in place?
-
Engine compression
I'm pretty new at working on cars, so this is probably a dumb question: Is it bad to remove the spark plugs (or other bolts for that matter) from the cylinder head when the engine has been warmed up? It seems to me that there would be some problems with the threads being damaged what with the different heat expansions of each metal... Is it OK to do if i'm sure the threads have had some high temp anti-sieze put on them before?
- HS30
-
Liquid Exhaust
I've been getting it too, but i've attributed that to the massive amount of oil being burned (about 1 quart every 400 miles).
-
Junk Yard Donor
Do really old springs have any problems with changing stiffness or size when they have been sitting around uncompressed for a long time?
-
Reliability?
What part of the country will your school be in? That will have a lot to do with whether you can use it effectively as a daily driver. Living in Texas, I can tell you that using a 240Z without A/C as a daily driver is definitely not ideal. During most of the summer my Z stayed in the garage on the hotter days and I ended up driving something else. During the winter in the Dallas area they tend to go nuts dumping sand and whatnot all over the bridges. Some people say sand isnt harmful, but just head downtown to where they keep the piles of sand under overpasses... the sand has literally caused the concrete of the support pylons to disentegrate. After a good freeze and subsequent sand-panic, my Z will probably not come out again until after a few good warm rains (be it spring or otherwise). Having not properly rust-proofed the underside yet, I don't want to turn a relatively rust-free Z into a mess. I'll likely be transferring to UT in Austin next fall, and I plan to bring my Z along provided I can get some other guys in on splitting the rent on a house with a garage. If the Z has trouble, I can always ride the metro bus system.
-
Parts Score!
Nice! Your car is gonna be great!