hr369

when are you going to paint the area at the bottom of the windshield? that area shows a bit even after the cowl cover is on.

Perhaps that old 240 motor has some stuck rings from sitting so long. You might try getting it running first and see if the compression on some of those cylinders comes up. Thats the route i'de take first before buying another motor. BTW... What shape are the exhaust ports on the 280z motor?

park that truck outside and park the z in the garage

if anyone is interested in reading about it. even has the seller posting how he obtained it and what his plans for it were. actually what i find more interesting is the new processes to make sand castings using 3d printers. I do wish they had a 3d printer that could print up a complete aluminum cylinder head. DOHC L6, Was somebody looking for the Goerz-Paeco DOHC L6 Head ? - Nissan L6 Forum - HybridZ

you can use the original blue and gold calif plates if you didn't register it in minnesota and you still have the original calif title and plates and the car is still on the calif dmv computer system.

nice wheels? wheel locks. sound system? take it out. good alarm system? protected by smith and wesson sticker? get the whole car wrapped in a wrap that has graphics on it that are graffiti rust and dents.

to lower it in the back try using 240z spring perches. i lowered mine quite a bit that way.Those are my favorite wheels good choice. The red one was lowered in the rear. This is what it looked like after.

I just sold one of my 78's for 8000$ and from the looks of this graph on recent sales they are going up. Searching Auctions for Datsun 280Z | Keith Martin's Collector Car Price Tracker If you're looking at it from an investment standpoint don't invest 20k into 1 car. Buy 4 5000$ cars and keep them stock. 240z prices appear to be flat on the other hand. Searching Auctions for Datsun 240Z | Keith Martin's Collector Car Price Tracker

be very wary when you see a newer looking "nissan" parts box on ebay. i know there are ebay sellers out there that have a nissan box but put aftermarket parts in them. ive bought rubber items that don't last long and start falling apart very quickly.

You need to do step 4 now and take it to a machine shop and have the bolt extracted. You were planning on removing the timing cover anyways right? Im not sure what you're trying to do here. Why don't you just pull the head and take it to a machine shop and have it pressure tested?

what angle are you looking at it from? to get a true idea of what the color looks like it should be flat and facing you and preferably outside under the sun. fluorescent lights inside the shop change what the true color looks like. did they mix the paint using a formula or did they computer match?

I replaced my heater core hoses a few years back with the rubber non braided type. I thought that was it for another 10 years or so but i got a big surprise when i heard a hissing noise and then tons of steam inside the car. This night really sucked. It took me 2 hours to travel 30 miles. It completely drained my radiator and i only had a lunch box with a dr pepper and 2 ice packs. You can't imagine how expensive a tow is at midnight in hawaii. So i improvised. First the dr pepper went in then i poked holes in the ice packs. Its semi liquid but helped a little. 2 mph in the emergency lane and i finally reached a little shopping center and drained some stinky koi pond water. Anyways, fortunately i live in a place that is warm enough to not need a heater so i just bypassed the heater core altogether. I was reading a few threads in the past about looping to bypass the heater and how bad it was for the coolant temps in the cylinders in the back of the head. So i plugged everything off. The lesson learned here was to replace the heater core hoses with the braided type that last 30+ years.

if you're going factory nissan parts the hard parts to find new are the expansion valve and compressor. The expansion valve is no longer available at any dealer for quite a while. If you will settle for used parts then there are quite a few available on ebay or other zcar websites. The hitachi a/c compressor was used on other cars. Don't limit yourself to just the datsun part number. 80's and 90's subaru's used a very similar hitachi's. I used a mjs170 from a 300zx. I had to change the high and low pressure fittings on the compressor but new hoses had to be built anyways. Condenser I used was aftermarket parallel designed for R134 An idea i was toying with was putting the zx evap into a s30. Its bigger and would have better cooling and the expansion valves are still available new. Lastly, if you don't like tinkering with cars then i recommend the a/c kits from vintage air or msa.

this lip here is another common are for water leaks

this is an old thread but there may be others out there still looking for these.1978 Datsun 280z Black Pearl Sap Decal Stripe Kit | eBay user banderson1971 on ebay is selling them for $299

reproduction radio faceplates could be made easily with 3d printers

wow for 1300 bucks someone could probably gut the original radio and update it with state of the art bluetooth and satellite radio

dupe post......

if it were me i'de give them a call back and cancel that order to repair after finding out i already had a good radio. i had one of those seeking radios from i think it was #43 car that was totalled. there seems to be a pretty good supply of those on ebay. i've bought several and there is one on there now.

those spot welders make a much cleaner weld than mig.

if that passenger side window has been down all the time its been outside, i'de say swiss cheese floors too

1970-85 datsun/nissan parts Zcar parted over 50 cars...have ANYTHING u need.....also 70s pickup parts anything.....shells alo available...call 5416802427....one in pic is a orig motor 77 auto trans 1k cash....wanted dead or alive ur datsun..... 4other zcars for sale... 77z 78z 85ttops 85 ttops turbo

Someone got a great deal 334 bucks for a set of wheels and tires