Yarb

What is the condition of your distributor bushings? Meaning is there any wobble/back and forth movement when you move the shaft? If so you might want to go with a new system. IMO

Hey Cliff put on your Librarian Glasses and solve this one!!

My apologies I was mistaken on the offset of the wheel.

Personally I have no idea. They are still available through Nissan.

Go buy some taps to figure out your issue. Chances are it’s 1.25. You’re going to need to clean the threads regardless. Don’t try to install a bolt without cleaning almost every thread you run into.

You must have contacted the wrong business. His website shows the wheels still available.

Which bumper are you trying to install? 280 or 240 series?

I believe the success rate here is pretty good with the past history mentioned in earlier posts presented. What puzzles me is the cost of the relay. I’m sure there are folks here on the forum including myself have a factory one available since I converted to OER Carbs.

You need an auxiliary pusher fan or a larger radiator.

Rob @ ZCarGarage in San Jose.

Probably need to put some thought into replacing the short lines. You need to do an evaluation of what condition of the parts you’re working with.

Search Vintage Air

@SteveJ has come up with a viable LED solution that has worked successfully for quite a few of us here.

Steve won’t get notified on the forum if you don’t use the “@“ before the user name. In this case it’s “@SteveJ”. Just a heads up when you are replying to a certain member with a message or response.

@siteunseen Our Resident Librarian can dig this thread up for you. Have seen it many times here. Sorry Cliff, Figured you were bored on a Sunday afternoon! 🍻🌭