mdbrandy's Content - Page 35 - Classic Z Car Club Skip to content

mdbrandy

Community Member
  • Joined

  • Last visited

Everything posted by mdbrandy

  1. Talk to Chloe at Midwest Z.
  2. This page: gas tank vent repair lists a possible source for the 5/8" line.
  3. On the '71 240Z that I switched from auto to manual, the pedal brackets were all there; just needed the pedal. The hole in the firewall for the clutch master cylinder was there - with a metal plate bolted over it. Just needed to remove and put in the cylinder. Pretty straight forward on that car.
  4. I've bought a gasket set and one of those crossmembers that 2ManyZ's was mentioning. $9.99 for the gaskets and $31 for the crossmember. I looked at the Heads, but the part number had N33 in it - is that an E88 head? Anyway, they've delivered and I have no complaints.
  5. The plastic toolbox lids only fit the series 1 (read: one) Z's. They have a hinge that attaches with screws to the floor of the car behind the seats on the raised area (there should be brackets welded to the floor of the car) and then the two L-shaped brackets on the vertical wall behind the seats for the top of the toolboxes to be screwed into with a couple knurled knobs. If you have two lidded compartments on the luggage area floor just behind the seats, then you don't need the plastic toolboxes. I have attached a picture of the plastic toolbox floor brackets in my car behind the left hand drivers seat (circled). Note that my L-shaped bracket on the wall (see the black painted area) was removed by the previous owner. hope this helps.
  6. It'll be sweet when (and I say WHEN, not IF) I get it done. Right now I'm working two jobs and taking a graduate-level computer science class, so there just isn't much time left... Add three active children to the mix (all boys, so "Dad" gets to do most of the stuff with them), and I REALLY don't have any extra time. Ah well. They'll grow up and leave. The Z will still be there :classic: .
  7. It's a nice ride - I love the sound. I'll be happy when mine will make ANY sound again .
  8. Works now with the install from your link. It appears as though they just put up a new download version on 9/2/2003 that is now called DivX51GAINBundle.exe or something close to that. Apparently they decided to no longer give it away free if you don't want GAIN garbage on your machine. I won't install anything that puts that adware/spyware/virus junk on my machine. If it does it in stealth mode, I get REALLY pissed. I had to put Adaware on my home machine because my kid downloaded something that installed GAIN. Not happy. Anyway, thanks for the link. Works now.
  9. I don't get any video - just audio. And if it needs the DivX codec, then I'm SOL, since to download the free version, you have to allow that stupid GAIN adware to infiltrate your computer. At least from what I see. If there's any way to get the codec without the virus software, I'd like to hear about it.
  10. All you need are the correct length bolts to attach it to the stand. Your transmission bellhousing bolts won't be long enough. Also, different stands have different length 'fingers', and so you have to match the bolts to the stand. I bought a set of bolts when I rebuilt a 280Z engine back in the '80s to use on a stand I bought from JC Whitney. Four months ago, I bought a stand from Harbor Freight, and found that the bolts that I still have now (I am a terrible pack rat) were too long to use on that stand with my 240Z engine. Had to buy new bolts. Not expensive, but get them before you lift out the engine and need to attach it to the stand!
  11. Nope. In my car, which has the choke and throttle (I'm just missing the knob and throttle cable), the choke is on the left and the throttle on the right. Just like the picture. Thanks!
  12. Great. Then at least we know that there is a part that was used in automatics that might work in a manual. Does it look like the attached pic that I found on the web?
  13. Thanks for the info. I tried MSA - they still list it in their catalog and on their web site, but its NLA. Oh well. I'll try all the used sources I can think of and see what happens :classic: . All I really need is the cable and knob! I was asking about automatics because there seems to be a part listed that looks like it could be right, but was listed as for automatics. Any overseas Z guys have a hand throttle on their automatics? Thanks again.
  14. For those of you with fried fuse boxes, and lots of money to spend, I was browsing around on MSA's site, and they are advertising a new, replacement, reengineered, "modern" fuse box replacement for 240Z's for $199. Supposedly has the stock connectors, correct wire colors, and either short or long pigtails. FYI.
  15. Considering that when I found it, it had been sitting outside for those two years (during Illinois winters), and the entire underside was packed with dead leaves, and there was a squirriel nest under the battery tray, and the window and hatch seals had been leaking....you get the idea. I suspect it was a lot better two years ago. I didn't pay him $6K, though :classic: .
  16. Amazing what you find if you dig around on this site. Here's an add for my car, two years before I bought it! http://www.classiczcars.com/forums/showthread.php?s=&postid=1925#post1925
  17. Interesting. If you can get the parts, it'd be easy to add. What I'm looking for, of course, are the parts to restore mine! All I really need is the handle and the cable. The rest is still there (although if I could find it, I'd take the whole assembly too!). I'll have to ask Enrique where he got the parts if he did... Thanks.
  18. Anyone know if the hand throttle was installed on automatic-equipped cars, either in the US or anywhere else? Thanks.
  19. I had a '75 280Z back in the mid 1980's. Ran great for me from '82 through '89. 2ManyZ's is right, though. Check for rust. Mine ended up with essentially no inner fenderwell at the left rear. Took off the left rear interior quarter plastic piece, and could see right out of the car through the wheel well. Exhaust fumes were terrible at that point. That's what made me look. FI was great, except the PO had hacked the wiring behind the dash, and after I had the car for a year or so, it caused a short that kiiled the engine and took Datsun 10 days to find and cost $600 (in 1982) to replace the airflow meter and the FI relay. That's not the car's fault, though. Overall it was a nice Z.
  20. I've seen those on e-bay, and wondered if they are comparable to the ones you can get through MSA or Victoria British. Let us know.
  21. That's exactly what I've been watching, but I didn't know if there was any real use for it. My 240 has it's original block and E31 head, so I don't have much use for anything else there, but you never know for a future build on something else...
  22. You can get reproduction boxes. I don't know how they compare to the originals. I have my originals in a box downstairs, but they're cracked. If I get a chance, I can take a picture, maybe tomorrow.
  23. Excellent! thanks for the hand-throttle picture. Now all I have to do is find one of those knobs. Any ideas there?
  24. No opinions, huh?
  25. Chris, Here's one of the pics you sent me of your toolbox tab and knob.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.