Everything posted by mdbrandy
-
Mystery Switch
Interesting. My dash has both holes cut out at the hazard switch - the bottom one has the hazard switch in it, and the top one is empty. So, how about other early owners chiming in - do you have a radio like mine with the antenna rocker, or do you have a toggle? Was a cassette AM/FM unit available in '70, or could it have been a later addition? Mine is AM only. Does your radio have a rocker like mine? My car seems to have very few options (no rear defogger, etc. ), so maybe AM only was different than a more loaded version. Picture of my hazard switch area attached. I have been worried that the PO had replaced the dash with a later version that had that upper hole cut out for the cig lighter, but he said he didn't...
-
Mystery Switch
That's what we're here for, right :classic:
-
Center Dash Restoration
I snapped one other pic tonight while taking my dash pad off the frame. This is the back of the heater control panel, where you can see the four control wires connected to the switch assembly on the heater control panel.
-
"BEFORE" Restoration
-
Center Dash Restoration
So far I've got about 600 pics, and some day I'll have a chance to go through them and upload to the gallery. Right now, I'm limited to grabbing the ones that are useful at the time. They are all high res 4 Megapixel images, so I have to downsize each one to upload it . Not hard one at a time, but a lot of work for 600 and counting :classic: .
-
Center Dash Restoration
Here's a pic of one of the cable connections on the left side of the heater box. Note the cable clamp and then the connection of the wire at the valve.
-
Center Dash Restoration
There are 4 steel cables running from the heater control levers to the various vent flaps and heater valves. You have to get under the dash and disconnect them at the flaps/valves on both the left and right side of the heater box. On the left side are a couple flap connections, and on the right is (I think) one flap connection and one valve connection. If I remember, the valve connection needed an offset screwdriver to turn the clamp screw to release that cable. Each cable connection has a clamp holding the vinyl sleeve, and then a screw/clamp connecting the wire to the flap or valve lever. You have to disconnect both on each cable. Then the heater control panel will be able to be moved out of the dash, although there are several other electrical connections that will need to be removed as well. Good luck. I can probably come up with some pictures if you need them.
-
What's your favorite part of the site?
I second (or third?) that. I thought I knew a lot about Z cars from my younger days with them, but you guys humble me with your experience and willingness to help. I use the recent postings at the bottom of the home page most of the time to keep up with conversations. Thanks!
-
What does this lever do?
I think I'm finally getting the idea. In the attached picture, you can see that bracket that I asked about in the last picture, as it lines up with the little bracket on the top of the accerator that I now know is for the cable end. I gather that the cable goes through the pinch bracket, through the little plastic grommet on the top of the accelerator, and there's a lead ball on the end of the wire to keep it from coming back through. Thus, if you pull on the throttle, it pulls the top of the accelerator forward, which is like pushing on the pedal. If the hand throttle is not pulled, then pushing on the pedal just has the top of the bracket slide along the wire. Do I have it now? Looks like all I need is a cable...
-
What does this lever do?
I just got a reply from the PO, and he says that, according to what he remembers, there was a bracket in the engine compartment (on the intake manifold) that the cable attached to, and that bracket is in one of the boxes of "stuff" he gave me. I'll be looking through that "stuff" when I get the chance. Anybody out there have a picture of an intact very early hand throttle connection to the accelerator, the manifold linkage, or any place else? Or, I just looked through my picture files, and is the attached picture the pinch bracket that you're talking about? Thanks!
-
backside of the dash
I'd be happy to do that. I haven't uploaded anything yet mostly because I have about 600+ pictures so far and I don't know what I would upload and what I wouldn't. I have to categorize them soon, since I'm starting to find it difficult to find what I want now :classic: :classic: . Anyway, if you think this kind of stuff would be useful in general, I'll do some uploading after I get back from a vacation I'm taking that starts on Thursday - no time before that to categorize much.
-
Mystery Switch
I suspect you'd win your bet. The wiring diagram lists Blue-red, Blue-white, and blue as the wire colors for that switch, and that's what I have. So, a PO must have done as you've said - installed a later switch after the original failed. Fun. Thanks!
-
What does this lever do?
Well, I had looked at mine, but I didn't recognize what I was seeing. I hadn't realized that the connection was at the very top. And there it was. So, if the e-bay pedal goes very cheap, I may end up with a second pedal (I bid very low since I didn't care too much). Maybe I can make a Z-sculpture out of spare parts.... Thanks for the info!
-
backside of the dash
She's pretty nekkid at this point :classic: .
-
Mystery Switch
Ah, good point - I'll check that.
-
Mystery Switch
Nope. The radio is original, and has the original antenna rocker to the right side. I might check to see if I can remember if the connector for that was unhooked - it could have failed, and a PO had to jerry rig a replacement. I asked the PO that had it since 1988, and he says he didn't even know that the switch was there.
-
Mystery Switch
See the attached pic, and see if you can tell me what the heck this thing is before I have to trace the whole circuit. It is a double throw momentary contact switch (i.e., click it up or click it down, and it clicks nicely, but returns to the center). It was installed through the side of my glove box. I'd assume it was just some hack except for the nice original-looking connector! Also, the corresponding connector in the wiring harness, and the harness actually has the original Datsun part tag, so it is original. So, any guesses, or maybe somebody knows? Would save me some detective work in the circuits. Thanks.
-
What does this lever do?
Thanks! I just went through all the "240Z" items on e-bay this morning, and either missed this, or it's new. I'm not an experienced e-bayer yet.
-
backside of the dash
-
backside of the dash
-
backside of the dash
-
backside of the dash
And another from mid-right side (note the mouse nest above the glove box, and the POs destruction of the back of said glove box). This is a very early dash (the car's production date is 11/69), and I'm sure that later dashes have a LOT more junk back here. I have many detailed pics of all stages of the teardown, so if there's anything specific you're interested in, just ask.
-
backside of the dash
Luckily, I just took my dash apart, and took about 100 pictures. Here's an early one, mid to left side of the dash (left as viewed from the front):
-
What does this lever do?
Oh! So it attaches in the drivers compartment directly to the accelerator pedal? I saw nothing like this when I took the car apart, so the PO must have removed it all :disappoin . No nylon cable holder or anything. So far, there are no Z's in any junk yards around here, so I'll have to find something remote if I am able to rehabilitate it. MSA lists the choke cable with hand throttle as [A] (no longer available). Thanks for the info. If you have any pictures around, I'd appreciate it.
-
Windshield & Bumper ?
I just took the windshield out of mine a few days ago, and 26th_Z is right - cut the weatherstrip off and the glass will just about fall out. I took a sharp utility knife and ran it around the perimeter of the glass (blade slipped down along the glass and into the weatherstrip). The weatherstrip then just peeled off, and the glass popped out.