mdbrandy's Content - Page 45 - Classic Z Car Club Skip to content

mdbrandy

Community Member
  • Joined

  • Last visited

Everything posted by mdbrandy

  1. Well, I was going to ask a similar question, but I guess all I had to do was read this thread. :classic: I just bought an 11/69 production 240Z with VIN #215. It's stock except that the vinyl was gone on the interior (carpet everywhere), and the transmission has been changed out (and needs work - reverse works intermittantly). Now, there's floor and frame rust, but that's another story... So, since I need new carpets anyway, I should find the ugly vinyl and get original carpets? How about the dash - mine is pretty badly cracked, and the early 240 dash is different than the late 240 dash in several respects - is a dash cover OK, or will I need to look for a "real" replacement? I'm not looking to make a show car, but I'll make it nice over time, and I'll probably keep it as stock as I can. All the rust comes first, but in some (many?) months I'll be looking to do the interior...
  2. Yup, it feels good to be workin' on a Z again. My first car was a '71 240. It had an automatic that I switched for a 4 speed from a junk yard, redid the struts, and did a bunch of "bondo body work" (I didn't know better then). I sold it in 1981 and bought a '75 280Z that I had until 1989 when I got out of grad school. I lowered the 280, did heavy sway bars, poly bushings, etc. I only sold it 'cause I had a new family, and the choice was the station wagon or the Z. Unfortunately, the station wagon won. My third is a '78 280Z that I bought 8 years ago, and let it sit in my garage. It spent one year outside two years ago, and that killed it. Frame filled with water I think, and the drivers side is gone. Doesn't run too well either now. I guess that's not unexpected after 8 years of only being started every couple years. I got the bug a few months ago to start working on the 280, and found that it wasn't worth it for a car that is just a run-of-the-mill Z. I started looking around, and found the #215 here in town, sitting outside, rusting away with a forsale sign in the window. I wasn't going to buy it, but he dropped the price significantly, and I couldn't resist, as much as many people tell you not to buy a rust-Z. I guess I'll see if it was a good idea :nervous: I'm sure you'll see me on the forums more and more over the next year. Hopefully I can join all you Z-experts and get back to driving my Z.
  3. Since I don't weld (yet), I don't think I'd even attempt to repair a frame. Maybe sheet metal, but not something as important as the frame. Thus, the search for a restoration professional in the area begins... The battery tray area will actually probably not be too hard. Most of the difficult curved areas were replaced 12 years ago, and they look solid still. The two rusted areas right now are in areas that are on fairly flat panels, so fabrication shouldn't be too hard. It looks like the work that was done previously was pretty good, and very little of it has rusted again. The rust now is in areas that are original sheet metal that wasn't replaced before. I don't know about replacing the whole front frame. I'd hate to replace things that are in reasonable shape. It'll be a while still before I ascertain if they are actually in reasonable shape. I'll probably be pulling the engine, and that'll let me get a much closer look. I'll keep your suggestion in mind. I didn't pay premium $$ for the car (although I don't think he gave it away either), so I can afford to put some $$ into it too. Since everything mechanical/body, etc. except the welding work (and a final paint job), I can do myself, I should be able to make a nice car out of it without mortaging the house. I'm not looking for a show car, but I want to put it back into good condition throughout. Other than the transmission, and no vinyl in the interior, it is pretty much original. And since I do like working on these machines (it's my 4th Z, although I haven't worked on one for 12 years or so), at least the voyage ought to be fun
  4. I spent a couple more hours under it tonight, and that darned piece is really the only part of the frame that is bad. Floor pans aren't good, and the frames under both floor pans have been previously replaced, but they are still in good shape. The battery tray area is a little worse than I thought, but not too bad. There is also some rust-through of the passenger wheel well just over the passenger side connection of the front sway bar. The box frame there at the sway bar looks fine, though - just the wheel well piece. I've been poking and proding all I can at that area, and can't go through the frame itself. Anyway, thanks for the encouragement. I'll start looking for shops next week. I work for the University here in town (University of Illinois) - maybe I can find someone in the Mechanical engineering fab lab that would take on the project of making the piece :classic: BTW, when the frame rails under the floor pans were previously replaced, the replacements do not have the drain holes that I seen in Charlie's frame rails. Did the originals have drain holes, and do I need to be worried about what the insides of the rails look like? I've banged on them a bit, and they don't deform, and they don't even really have much surface rust...
  5. Well, I bought a 240Z without knowing exactly what I was getting into - I knew about the rust, replacing floors, etc., but Charlie Osborn tells me that one frame part that I need is not available and has to be fabbed (the part of the frame rail behind the passenger side T/C rod pocket). See the attached picture. The drivers side is OK. Anyone replaced this piece and have any advice? I've only had the car about a week, and I've gutted most of the interior so far to see what I'm up against. Hopefully it's worth it. It is a 1970 - car number 215 built in 11/69. Some more pics of the rust problems at: http://www.csar.uiuc.edu/~mdbrandy/240Z/240ZRust.htm Thanks for any advice. Not fixing it isn't really an option at this point. :disappoin
  6. Images added to a gallery album owned by mdbrandy in Member Albums
    General Interior Shots

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.