foosman

Yes - thanks for the follow-up. I've put off reinstalling my headliner for 2 years now, mostly just not looking forward to the re-gluing process, and only having a 6-month window every year when it is warm enough to do it. Might just try this approach ...

Thanks @w3wilkes I was thinking non-US as well because of the balance tube.

Going through my parts collection from the past 30 years - my limited search with Mr Google along with the magic marker dates on the balance tube says this is for a 1973/74. However, there aren't any water outlets on the carb mounting faces, which I thought the 1973/1974 cars had? Can anyone shed any light on this one?

I ordered one of these plates for one of my ashtrays that was missing one, very nice piece. Quite close to the OEM unit, the only difference I could see is the reproduction is a flat piece, whereas the OEM slotted plate has a small rounded lip around the edge, at least compared to my other ashtray. Both ashtrays are from mid-1971 cars, in that transition period between original series 1 cars and later ones, if that matters. Fitment-wise, the "blade" part sits a little bit lower than the OEM unit per the attached pictures, but overall I'm very happy with the replacement. My ashtray is also missing the spring clip on the outside that I need to figure out now, along with finding a replacement for the pitted chrome rings around the lighter hole. Thanks @Chris Holt for your efforts!

Looks nice Chris - one of these and a repro trim ring around the cigarette lighter hole would complete my OE ashtray. Any chance of doing a stainless steel version of the ring insert instead of the plastic one you currently are selling? A group buy of either/both items might help with the shipping issue to the USA.

Started with the IZCC back in the John DeArmond days (1993/4), sort of monitored things through the Texas A&M hosted years, went inactive right around the time it shut down. Casually resurfaced here a few years ago, just celebrated year 10 of my 240Z's rehabilitation 😞.

Any thoughts/leads about reproducing the chrome ring around the cigarette lighter hole?

Sorry to hear this @CanTechZ and best of luck with the restoration. It will be a very nice memorial when you're done.

FYI - there’s a member over on HybridZ (walkerbk) who has created a nice replacement for the black bushing cover for the ebrake pivot. Picture of my OEM piece attached, which we used to design his version. Contact him with any interest, not me.

A delayed shipment arriving months later reminds me of a recent experience with Motorsport Auto. Two holiday seasons ago, I ordered a bunch of interior panels to take advantage of their holiday free shipping promotion. They were mostly out of stock with unknown ETA, so I told them to substitute other items into the order to get the free shipping. This past spring (over a year since the original order), I got a call from MSA telling me they had received a shipment of interior panels and they asked if I still wanted the items from my original order. I was surprised that they held on to the canceled order details for over a year. I told them that a big part of the reason for the original order was to get the free shipping, and they offered to honor the free shipping from the original order so I completed the order.

Yeah - need to find a replacement myself. There is an eBay seller from Poland who manufactures a repro of the entire ashtray, but he isn't interested in selling just the trim rings, or divulging any information on his source for them.

Not sure if these help - my '71 was running a set of the "MSA lowering springs" from the 1980s in these pics, along with a set of Boge oil-filled cartridges. I remember liking the setup for general street usage - assuming the new "MSA lowering springs" are the similar to the 1980s version, I think they are a good option. I'm currently restoring that car, and I have installed a set of reproduction Euro springs that the online community had reproduced a long time ago with the KYB gas inserts. Depending on how that setup looks once I get the chassis fully loaded, if I can't get the stance I like I may consider going back to the MSA lowering springs rather than cut the Euro springs down.

I'm assuming this is pwrbrake.com - do they include any paint work on the can in the rebuild price?

Thanks @emccallumno worries.

@emccallumI might be interested in this if @texasz isn't.