conedodger

Power Brake Rebuilders told me to just grab it with a good needle nose and twist.

Size I think Charles. 240Z was like 7” 280Z was bigger, ZX was biggest?

View Advert 280Z Mastervac I'm looking for a 280Z Mastervac. My friend saw my rebuilt mastervac and now he wants one. He's not on here. Advertiser conedodger Date 07/02/2021 Price Category Parts Wanted Year 1975 Model 280Z

Just got my bank statement for the purchase of this DBW Bosch Motorsport TB and the adaptor. The US/OZ exchange rate is certainly in my favor. This is almost $400 AUS but $100 less in USD!

The house 2.webp

In case anyone is wondering about my lack of progress lately, I bought another house. This one has @ a 700SF garage and though I closed, the seller negotiated a 2 week rent-back. I take possession next Thursday. The house.webp

I didn't get the clutch and fuel because with my Rebello 3.0, I had to make my own delivery and return.

Passenger side kick panel. Wires come through the firewall by the battery.

Caught in its underwear…

This looks like a track day for you LA area guys. Do I hear a supercharger? Does someone make a kit? Love me some supercharger! I've had two, an MR2 and a 4Runner. Shock the hell out of 5 liter mustang guys. Even had one run into a wall trying to keep up! willowsprings - YouTube

Logan Blackburn - IMSA @ Road Atlanta…

I spoke to Rob on the phone and he was pretty reassuring, but I'm wondering if anyone here has personally tried them. I have a fender roller from Eastwood but my car is pretty low and I'm not sure... I would probably just drive over and get them as I have a bit of free time these days and it would be great to see my old gang at Stanford... "ZcarGarage is a factory direct dealer for the Japanese Panasport 16X7+11 offset FS wheels that are our favorite go to wheel solution for the S30 model that allows fitment of 225-50-R16 tires. The wheels have silver centers with machined lip and include the center caps. Limited sets available. Timeless styling for your Z car. Price: $1,220.00 plus shipping. Please contact ZCG directly."

I got the stainless line replacements from Classic Tube. Reasonably priced and ready to go.

Plus 1 for Power Brake Exchange. I sent them 3 and got all three back in less than a week. I had all of them powdercoated and they were beautiful.

Datsuns at Daytona back in the day!

Sneaking down the driveway?

True. I think it was a pace car? Found years later behind an outbuilding before it was restored.

Why reinvent the wheel? I just found a DBW throttle body from Bosch Motorsports in 74mm which is slightly more than the calculation for engine 'need' that has a weld on flange with a 70mm square bolt pattern. I suspect it will work but I have to wait for it to come from Australia to check it. I will keep you posted.

I'm not sure about the Elite 750. I am using the Elite 2500 and when you tell the tuning software what specific sensors you are using, The software generates a wiring diagram. I'll step back as I don't know the specifics of the Elite 750.

That non-terminated harness is what I am using as well. I think any diagram is highly dependent on what sensors you use. Besides, the Haltech software creates a diagram for you...

Ondagrass!