Topics Last 30 Days

Did precision plate those door latches? They look really good!

Find a weather resistant maxi fuse (or ANL fuse) holder if you are planning to mount the fuse holder where the current fusible link holders reside. I also suggest using ferrules on the wire ends to improve clamping force on the wires. You will need to find a ferrule crimper that can handle the wire sizes (relatively easy to find on Amazon). Here is an example of a marine ANL fuse holder: https://www.crutchfield.com/p_867FUSEDIS/Wet-Sounds-WWX-FUSE.html

The click you hear is normal. That is the accessory relay. Move on from that. You need to verify voltage to ground (or negative) at the starter solenoid when the key is in START. That is the black/yellow wire. Suggested actions: Pull the black/yellow wire off the starter solenoid. Put the positive voltmeter lead on the black/yellow wire and the negative lead on the battery negative. Have your assistant turn the key to the START position. Measure the voltage (and report it here). If you have around battery voltage at the black/yellow wire, then here is the next test. Keep the black/yellow wire removed. Ensure the car is in neutral. Get a screwdriver. Touch the screwdriver to the positive cable on the starter and the spade terminal where the black/yellow wire was. You don't have to hold it there for long. If it doesn't engage the solenoid immediately, try a couple of more times. Red arrow - Spade for black/yellow wire Orange arrow - Positive cable from the battery. If the solenoid immediately engages, then your starter solenoid is probably in good shape. Report your results.

When it’s time to buy a laptop, one question always comes up: new or used? The right answer depends on more than just your budget—it’s about getting the best value for your needs. In this article, we break down when a used laptop is the smarter choice and what to look for before you buy. Looking for quality and affordability? Check out Soum, a trusted platform offering a wide selection of carefully inspected used laptops to suit every need. Advantages of Buying a Used LaptopOpting for a used laptop can present buyers with numerous compelling benefits. Here are the most significant advantages: 1. Substantial Cost SavingsThe foremost benefit of purchasing a used laptop is the significant financial relief it offers. Buyers can save a considerable portion of the original cost—often 50% or more—especially when purchasing from reputable brands or high-spec models. In today's economic climate, such savings can be a game-changer. 2. Access to High-End Models at Affordable PricesGoing for a used laptop opens the door to premium specifications at a fraction of the price. Consumers can afford devices equipped with faster processors, more RAM, and superior graphics performance—all of which are typically out of reach with new models in the same price range. This makes used laptops an attractive option for various groups including students, programmers, designers, and professionals who need powerful machines without breaking the bank. 3. Environmentally Sustainable ChoiceChoosing to buy a used laptop is a responsible environmental decision. It helps reduce e-waste and extends the lifecycle of electronic products. Prolonging device use lessens the demand for raw materials and the energy required to manufacture new products, thereby shrinking the tech industry’s overall carbon footprint. 4. Conservation of Natural ResourcesBy choosing a pre-owned laptop, you contribute to minimizing the exploitation of raw materials, many of which are sourced from ecologically sensitive regions. This supports environmental preservation and encourages circular economy practices within the tech sector. 5. Greater Availability of Spare PartsOlder laptop models often come with the benefit of having more accessible and affordable replacement parts. This makes maintenance and repairs easier and more cost-effective, allowing the device to remain functional and serviceable for longer periods. Potential Challenges of Buying a Used LaptopLike any second-hand purchase, buying a used laptop comes with certain risks. Below are some of the common challenges: 1. Hidden Technical IssuesOne major concern is the potential presence of hidden defects or wear-and-tear issues. Problems may involve the battery, screen, keyboard, or even internal components like the hard drive or memory—leading to unexpected repair or replacement expenses. 2. Lack of Warranty CoverageUsed laptops frequently lack warranty protection or come with very limited coverage. This means any post-purchase repairs fall entirely on the buyer, possibly straining a carefully planned budget, especially if major issues arise shortly after purchase. 3. Absence of Cutting-Edge TechnologyUsed laptops may rely on outdated technologies that don’t support modern software or applications. This could limit your ability to use the latest tools or require future hardware upgrades, which may be costly or impractical. 4. Compatibility LimitationsCompatibility can also be an issue, particularly with newer accessories or software. Older laptops may not support modern connectivity standards like USB-C or Thunderbolt 3, reducing their adaptability and future-proofing. 5. Hidden Ownership CostsWhile the initial price may be attractive, hidden costs can accumulate over time such as purchasing updated software, hardware upgrades, or dealing with downtime due to repairs. These factors can significantly impact the long-term cost of ownership. Buying a used laptop is a smart move when done right. For trusted deals and quality you can rely on, explore Soum’s collection of inspected, budget-friendly laptops tailored to your needs.

Somebody bumped the bid on the white 1970. By an odd amount. The guy buys a lot of car so there could be an interesting battle on tomorrow. Does anyone know if a 1970 240Z could have a three groove damper pulley? It has an L28 crankshaft so the damper has been off. The sellers on BaT are interesting because they often don't really know the details but don't want to say "I don't know".

They have this kit and one with several more pieces, which I assumed was for 280zs.

Good luck, and just let us know if there are still unanswered questions.

never know when a September/October 69 dated glass may pop up!!??

Perfect. I just couldn't see the bottom washers in the other pics. Looks great.

http://www.zcarblog.com/wp-content/uploads/2023/06/IMG_5209-1024x768.jpeg Join us on Sunday, June 8 for the Z Owners of Northern California (ZONC) gathering at the Blackhawk Museum! See flyer below for more details: http://www.zcarblog.com/wp-content/uploads/2025/05/499860045_10236740117827575_7586398421903317342_n-scaled.jpg We had a blast at last year’s ZONC event with a fantastic turnout. See our report from the 2023 event HERE, and Z you at Blackhawk! http://www.zcarblog.com/wp-content/uploads/2023/06/IMG_5176-1024x768.jpeghttp://www.zcarblog.com/wp-content/uploads/2023/06/IMG_5284-1024x768.jpeg http://www.zcarblog.com/wp-content/uploads/2023/06/IMG_5194-1024x768.jpeghttp://www.zcarblog.com/wp-content/uploads/2023/06/IMG_5250-1024x768.jpeg View the full article

Here's a good read on installation for a '72. Dave's 1972 Datsun 240z: Electri...Electric Fuel Pump InstallationIn an effort to make the 240z more reliable, I've decided to upgrade to an electric fuel pump and then retire the mechanical pump. By using...

I don't know if it's the ONLY reason for it's existence (seems unlikely), but that is where they printed the identifying markings:

I worked on Cody's car some Friday Hung the header, intake manifold and carbs The header is a pretty tight fit! I still need to come up with a way to hold the parking brake cable over Got the radiator in and have the alternator most of the way in

http://www.zcarblog.com/wp-content/uploads/2025/05/DSC085591.jpg 1992 Nissan Skyline GT-R R32 for sale. All work and maintenance performed by Z Car Garage since 2013 Built engine with forged internals. Stock turbos. Ohlins Road and Track coilovers Stoptech BBK front & rear TE37SL wheels Bride seats Takata Racing harness Additional parts and details below Asking $75,000 obo Contact Lou at ltstrick32@gmail if interested. http://www.zcarblog.com/wp-content/uploads/2025/05/DSC08544-e1410764891805.jpg Build History at Z Car Garage http://www.zcarblog.com/wp-content/uploads/2025/05/IMG_7806.jpg http://www.zcarblog.com/wp-content/uploads/2025/05/IMG_7800.jpg For most fans of Japanese sports cars the “R32” Skyline supercar is highly regarded and historically significant. Not familiar with this model? Find out what makes it special over at JNC. This R32 Skyline received extensive suspension and engine work performed by Z Car Garage including fully upgraded front/rear Ohlins coil-overs (2022), sway bars, T/C rods, camber/control arms using parts from Cusco and Powertrix: http://www.zcarblog.com/wp-content/uploads/2025/05/IMG_8435.jpg http://www.zcarblog.com/wp-content/uploads/2025/05/TV7113-009-e1748642738732.jpg A full Stoptech big-brake system with larger calipers and 332mm vented rotors F/R was installed. Volk TE37SL wheels, sized 18×9.5 and finished in high-metal bronze. The wheels perfectly frame the Stoptech 332mm big-brake kit at all 4-corners: http://www.zcarblog.com/wp-content/uploads/2025/05/DSC08539.jpghttp://www.zcarblog.com/wp-content/uploads/2025/05/JC92912-013.jpg http://www.zcarblog.com/wp-content/uploads/2025/05/DSC08555.jpg The RB26 was rebuilt using a Rebello-prepped bottom end consisting of forged JE pistons and Eagle rods. Mild headwork and stock turbos make up the top end. http://www.zcarblog.com/wp-content/uploads/2025/05/IMG_2260.jpghttp://www.zcarblog.com/wp-content/uploads/2025/05/JC2213-003.jpg http://www.zcarblog.com/wp-content/uploads/2025/05/JC2213-094.jpg A full Tomei titanium exhaust system was added including downpipes, test pipe and the Expreme Ti muffler, installed at ZCG: http://www.zcarblog.com/wp-content/uploads/2025/05/DSC08546.jpgVideo of exhaust with drive-by: With the new exhaust and Haltech it was dyno tuned to a healthy 412hp/311tq to the wheels: http://www.zcarblog.com/wp-content/uploads/2025/05/Lou_S_GTR_Final-1024x759-1.jpg http://www.zcarblog.com/wp-content/uploads/2016/09/DSC08552-400x300.jpg The interior features a Bride driver seat with Takata harnesses and a MOMO steering wheel: http://www.zcarblog.com/wp-content/uploads/2025/05/DSC08540.jpg http://www.zcarblog.com/wp-content/uploads/2025/05/IMG_2263.jpg The R32 has been driven to many shows/events running flawlessly. It is equally at home on the street or at the track. http://www.zcarblog.com/wp-content/uploads/2016/09/IMG_0506-400x300.jpg http://www.zcarblog.com/wp-content/uploads/2016/08/DSC00819-e14338203325451-400x224.jpg This R32 was featured and driven by Jason Cammisa in the GT-R episode of IGNITION from MotorTrend: http://www.zcarblog.com/wp-content/uploads/2017/06/Screen-Shot-2017-06-18-at-10.13.35-PM-1024x700.jpg If you have not seen the video yet click on the YouTube link below for a preview of the R32 in action, and see our behind-the-scenes report HERE. The was driven to the 2019 Skyline Matsuri in San Francisco: http://www.zcarblog.com/wp-content/uploads/2019/03/IMG_7005-1024x768.jpghttp://www.zcarblog.com/wp-content/uploads/2017/06/IMG_0509-400x300.jpg More photos in the gallery below. Contact the shop for more information. http://www.zcarblog.com/wp-content/uploads/2017/06/IMG_0517-e1500358346764-1024x766.jpghttp://www.zcarblog.com/wp-content/uploads/2017/06/IMG_0566-e1500359143764-1024x688.jpg http://www.zcarblog.com/wp-content/uploads/2025/05/DSC085432.jpg View the full article

I believe that's the Nissan Heritage museum. I think I go back to Japan in July and plan to go there next. Didn't know about the Subaru museum, thanks.

I suspect that in order to be period correct, it should leak. 😄

Motorheads Season 1 Episode 10 starting at about 38:45 minutes in. The girl (and she is a Motorhead) just found this car in a junk yard because a Cardinal landed on the hood like a message from her passed away father. The episode ends with her looking at a Clymber manual on Z car building.

Reproduction fuse cover/ash tray for the 240z Datsun Series 1. Reproduced in Acrylonitrile Styrene Acrylate. Comes with silver ring insert, tray silver inserts, lid pins. Ideal if you want to remove and store your original away from the car and have a visual reproduction in place. https://www.ebay.co.uk/itm/167546076628

Very nostalgic for me. Back in 1995 I was asked to accompany a couple of Japanese motoring journalists to the Le Mans 24hrs race to assist in press coverage of NISMO's GTR-LMs and their participation in the race for Club Le Mans. We had pit access, press room access, full catering and hospitality. A big contrast to my first visit to the LM24hrs in 1970 when I only ate frites and crepes and managed to catch just a few hours sleep whilst soaked through, laying on newspapers by the side of the track...!

I was able to get everything back together on the car yesterday. The new yoke (with a new bushing in the back of the transmission) was a very snug fit. After double checking I torqued everything, I was able to take the car on a test drive. What a big difference! I got up to about 80 on some interstate and the severe vibration, which previously could be felt with a hand on the transmission tunnel, and seen in the blurring rear view mirror, was gone. Now, I can get back to the small list of things that I have to do to finish this car: install inside rear tail light trim panel install front right kick panel clean and glue in tool compartment liners repaint tail light trim panels (for better color match) install NOS glove box hinge/inside panel install rear hatch trim panel repair and install factory radio, or install guts of a new radio in the old radio case

I have 2 OEM Nippon Denso Starters and 1 hitachi starter. The two Densos have part numbers but the Hitachi has no numbers. I also have 3 alternators 1 hitachi with a part number and 2 that are of unknown maker. My dad used to import cars back in the 80s from Japan and replacement parts were hard to come by, hence why I have 3 oem starters and 3 oem alternators. I do know for a fact he imported 2 datsun s30's a RX-7, and a celica all 1970s era cars. I found some cross reference part numbers for the starters but am totally in the dark about the alternators. If anyone would like to buy them or know someone who needs these parts for an original rebuild that would be great. These parts are 100% from japan. They've been sitting in our garage wrapped in plastic for 40 years. I have tested the starters and they do operate correctly. Let me know if you are interested and we can work out a fair price.

But whats wrong with rockauto? Arent these ones good shock absorbers? Other suppliers are more expensive.

Thread highjacked. Start a new topic if you want to talk about hub stands.

Ended up picking up some 3m Body Schutz and a cheap undercoating gun and did some test sprays and this isn't what was used, but I think its close enough. It dries much harder than what's currently on there, which feels quite rubbery.

Guess I got into the game late…🤦‍♂️