26th-Z

Carl, Found the image with the plexiglass statement when I looked for pictures of the mounting hardware. But we were both wrong! Plexiglass (PMMA) - not polycarbonate as I wrote or Lexan as you wrote!

Just saw this on the BRE page of Bookfaced. My prayers to you Victor! A friend in need: We all love our cars but what makes being a "car guy" (that refers to us ladies too) so special is that our cars bring us together and make us a warm and caring family. You have a great car you're in the family, automatically! Victor Laury is a member of that family (along with the SoCal Roadster Club). He's had every kind of Datsun imaginable. Everyone says the same thing about... Victor, a great guy that helps everybody. Well now Victor is in need. He's suffered a stroke and he and his "direct" family could use our help. A raffle is being held so someone else who's worthy, can own Victor's beautiful 1970 Datsun 2000 Roadster. Raffle tickets are $100 (you can enter multiple times). A max of 300 tickets will be issued so pretty good odds! If you just want to send a donation that's okay too. Go to this link http://www.bre2.net/index.php?section=124 and you will find details on the car, the raffle entry form and details on where you can send your raffle entry or donation. Thanks for being a part of this great family. http://www.bre2.net/index.php?section=124 http://www.bre2.net/pdfs/bre2_victor_poster.pdf

This may help

I have a set of headlight covers as well. The lenses are polycorbonate. http://en.wikipedia.org/wiki/Polycarbonate Please read about (at least this) the material so that we may not discuss mis-information.

I drive an E46 330 ci daily. Hate it. I will NEVER buy another BMW. POS - poorly built (of plastic), fake leather, under powered, over priced.

Here is a link to the discussion. http://www.classiczcars.com/forums/showthread.php?30706

It's rare and I'm looking for one. That part number applies up to 12/70. PM me.

Keep the bumper.

Looks to me like the head that belongs on that engine. The web site you refer describes the E31 correctly if not generally. Let's see pictures of your project car!

Millen in New Zealand http://www.autoweek.com/article/20120413/CARNEWS01/120419925?utm_source=DailyDrive20120413&utm_medium=enewsletter&utm_term=article3&utm_content=20120413-Tuned_Nissan_GT-R_races_against_a_Eurocopter_AS350_helicopter_&utm_campaign=awdailydrive

Unleaded gasoline in 1975 requiring lower compression ratios. Quoting Brian Long, Datsun Z, Fairlady to 280Z; "The L26 was already struggling to cope with the California emission regulations, often being difficult to start and generally tempermental whilst running. As America was the most important market for the Z-Car, Nissan decided to cure all the problems associated with the California-spec cars in one fell swoop - enter the 280Z."

Jay, Looks like your HLS30U-00566 is a January 1970 build. This site is a pretty good reference. http://zhome.com/ Even though I don't particularly agree with a number of topics on the site, Carl has an outstanding collection of VIN data. Page down to the bottom and there is a listing for production and sales history. Carl also lists the differences between production series / model years. You'll get a kick out of this site also. http://www.geocities.jp/datsunz903/ Your 1970 dash can be repaired. There are huge threads on the subject here. Cruize through this site's archives and you'll find tons of information which may help you decide which direction to turn with your restoration. BTW, is your car equipped with the air pump emission control system or has it been removed? All the best, Chris

Yes, there is a difference between a '70 dash and a '72 dash. No, the wiring is not the same. Early cars had many distinguishable differences. And then there is the issue of the dated parts. Here's some reading for you: http://www.classiczcars.com/forums/showthread.php?31337-Kanji-found-when-removing-a-dash&highlight=kanji+markings http://www.classiczcars.com/forums/showthread.php?16870-Discover-various-quot-date-quot-use-cross-reference-method&highlight=date+stamp+kanji http://www.classiczcars.com/forums/showthread.php?32826-Well-I-wound-up-with-another-low-VIN-Z&highlight=date+stamp+kanji

When you're fitting the new floors and frame rails, bolt the transmission cross member and fit the sway bar to make sure you have good alignment on the new metal.

I can probably help you, Bill. PM me.

Yes, this is a good thing - very good thing.

I was surprised when I looked up repro fuel tanks at GasTanks.com. Surprised at the relatively low prices (like you mentioned, Hardway). A repro Porsche fuel tank is around $750, in contrast. I would imagine if there was enough demand that a repro would be manufactured given that the only other choice currently available is a reconditioned junk-yard tank.

Mike B beat me to it. I have been away for the weekend and just catching up. I was going to respond to the same points. Welcome aboard! So... if that's the case, the numbers match, I want to suggest that if you plan to severely modify a car, do it to a less valuable model year. HLS30-01955 isn't all that low, but it's still a first year car and there really aren't that many of them around. My cars have floors and rails in them and I don't think it's all that big of a deal. By the time you are finished you should have a very nice early example.

Are You going to show your car at the Festival, Carl?

Hi Bob, Thanks for sharing the experiences you have had with your beautiful car. I wanted to respond yesterday by saying that I can think of but a handful of "stockish" 240Zs that belong at any of the concours events mentioned. I would say the same for modified Zs - a handful. ZRush being a prime example. Concours events are traditionally "fashion shows" meaning that originality is far less important than how the car looks. Winning cars evoke an emotional response of beauty far more than award winning nit-picking accuracy. I can never seem to over-emphasize that. The Japanese classics, sold outside of Japan, had little (if any) influence on "kick starting their automobile economy". Nissan in particular, looked at the export market to increase business. The Japanese automobile economy was roaring along just fine. Evidenced by how much the Japanese imports took away from domestic American car sales!

Pretty wild looking car, isn't it?! I wonder if they will be able to make anything of it. What I was saying was that Nissan typically collaborates with experimental and prototype chassis design. And they have been doing it for a long time. For instance the 1986 March / Nissan R86V for group C racing.

That isn't a Nissan chassis - just the engine. Nothing new, really. Nissan successfully competed in the past with Lola and March chassis.

Very nice! Pictures?

5th, I get the Porsche 356 Registry magazine, very nice club magazine BTW, and one of my favorite regular articles deals with transactions within their realm. The examples range from new parts, used parts, and memorabilia just like our z-car world. I'm just gobsmacked with some of the stuff I see and what people are willing to pay. I remember buying a set of tools for my dad's car, how 'expensive' they were at the time, and now picking my jaw up off the floor for the same stuff. On the other hand, I don't see Datsun items increasing in value as fast. That could just be me, though. This wheels story has been a fun and memorable experience. One we will surely discuss over a few beers! Hope to tip one with the new proud owner some day.

You're really having a hard time with price of those wheels, aren't-ya 5th?! Welcome to the car collecting hobby! I wonder if Jim Faria bought them. He brought his very well done rallye replica to the Nashville convention.