26th-Z

I don't like to voice opinions about car values, however I don't see any reason why the car is priced so well above the prices posted on the value index sites for similar cars. It is priced well above a recent auction pinnacle. It has had the emission system removed. I think that car is worth half the advertised value - max.

I bought one. Very nice quality. Thumbs up!

Thumbs up to everything Mike said. If you have a solid one, you have something quite rare and unique. Not that the hollow cast ones are common!

That diagram explains the deck mounts of the rear supports. Love the diagram

Thanks for sharing the diagram, Alan.

Seriously? You read HERE that Nissan successfully combined metal with plastic? That would be quite a feat, don't you think? Do you not know the difference between plastic and metal? You must! You used a magnet and it stuck. What does that tell you? All emblems have mounting posts; both the metal ones and the plastic ones.

And gouging yourself in the event of a crash. They are not Federal crash standard compliant and not original. The black plastic, mushroom topped ones are original. They screw onto a threaded rod.

No pictures of the engine? Underneath?

Those are road wheel cover (s) 40315-E4101or E4400 which replaced E4100. Although my book says applicable to 7/73, I know that E8800 was used for the '72 model year beginning in late '71. They appear to be original with original factory markings and typical surface rust on the inside. They fit all the standard road wheel sizes.

Wasn't it one of these pictures that started the "correct-distributor-cap-color" argument?

The early Z's have zinc plated (silver) door strikers and latch mechanisms, including the bolts.

" sole remaining original BRE 240Z " What?! Is Carl Beck's car chopped liver? Anyhow, I'm glad to hear you all had so much fun. Glad to hear you had good weather! Sounds like this was a good Mitty (except for the VW guy, glad he's ok). Would have liked to have taken in the show at Randy Jaffe's car. Reminds me of "the good-old days", Randy. T h a t ' s racin'! Would have been nice to see John Morton again. Thanks for the pictures and conversation - great thread

Hi Kats! Thanks for the pictures. I like the red HS30-H but I am not a fan of the vinyl top.

Back on topic...

Ahhh... A gracious trip down memory lane...looks better than my lovely 27th. February 1970 build, probably. I certainly hope the car is worth $100,000 when it's complete!

Yea, take everything found on Facebook with a grain of salt. This was a link to a RACER magazine page. I was initially attracted to the photo, but I just couldn't help clipping the article. It's so 'BENCHRACER'!

From the HSR Facebook page and Racer magazine; "Another very significant car that will be competing at Historic Sportscar Racing's upcoming Classic Motorsports Mitty at Road Atlanta on April 26-29 is this 1976 IMSA GTU Championship-winning Datsun 240Z now owned and campaigned by David Martin. In 1974, Brad Frisselle made the decision to compete professionally. He formed a company and a racing team (Transcendental Racing) that designed, constructed, and tested a Datsun 240Z prototype for the IMSA Camel GT Series. In 1975, Brad had his first three professional victories and was awarded IMSA's Most Improved Driver award, becoming the only man to win these coveted awards in both IMSA and the SCCA. Frisselle went on to win the IMSA GTU championship in 1976, in his team's Datsun 240Z, scoring eight victories out of the eleven races that he entered. Brad soundly defeated the factory Datsun team as a privateer with his own team, Frisselle Racing. This car is the 1976 IMSA GT/U championship car. The chassis of this car was the first 240Z imported to the United States in 1970. Mac Tilton designed the suspension and built some of the specialized parts. The chassis, roll cage and body were all constructed by Dave Kent with assistance from Yoshi Suzuka who was also responsible for the design of the aerodynamics on the car. John Knepp of Electramotive built the engine. After the car was finished Trevor Harris added his expertise in the development of the chassis and suspension. In the day this car was the most advanced and fastest GTU car racing in IMSA."

We have covered this topic - in the archives somewhere. This is a picture of Kats' early gas cap. No flange on top and no chain. We also covered the gas door knob. Early, early ones were chromed plastic and locked in the vertical position. There are two versions of the later metal chromed knobs which closed in the horizontal position.

I see Bruce every now and then. He lives in Sebring.

Jerry, The rounded top, phillips head wire hose clamps are zinc plated. Silver, not yellow cadmium. I DO have later style wire hose clamps with hex head screws that are cadmium plated, but they are not the 'correct' style for my early cars.

Yep. Specifically, those are the Hitachi HJG 46W-3A type. My cars came with the HJL 46W type. The heat shield is for the long return springs rather than the short ones.

This is the optional 8-track for a "240Z". I don't think it was commonly available in North America until the 1972 model year and accessories catalog. Your model # is different from mine.

Couple of points: Unless you guys claiming to have lived 'American car culture' are in your mid-seventies, no you didn't. The Datsun 240 Z is an American import in every realm of the meaning associated with the 'American car culture'. Nissan's export strategy wasn't any different than English and European export strategies at the time. There's a reason for that and if you studied world history past the third grade, you would know. Any association with 'exclusivity' is a thin thread on a drunken day. Alan, I'm afraid your four aces of knowledge and perspective have been trumped by the intellectual insufficiency in which we find so persuasive from our society today. My sympathies and condolences. Finally, thanks for sharing the information, Blue. There is quite a bit of interesting and useful information; my preference being the technical information, diagrams, graphs and charts. Perhaps we could focus on our astonishment of how much thought, how many people, how much effort went into the design of the S30 to make it as successful as it became.

Mr. Junkie is smok'in too much JDM. This has to be the funniest thread I have seen in a long time. Thanks for the chuckle this morning! Ya' know, the more JDM you smoke, the less your spring rate. Unless, of course, you vape with a TOR CO. Sorry, I couldn't help it.

Depends on your serial number. 'D' wheel covers lasted until about HLS30-46000 according to Carl Beck. The Nissan parts catalog lists HLS30-46001 beginning in September 1971. 40315-E4100 was replaced by 40315-E4101 and used up to 7/73; 40315-E8800 was from 8/73 according to the parts catalog. I would recommend 40315-E4101 - shown below - unless you have a build date and serial number later.