Carl Beck

That listing seems to be from 2009 - - wonder if he still has any? If a Repro is worth $885.00 I suppose originals would be worth something more than that. I don't think I would sell mine {excellent used} for less than $1100.00. FWIW, Carl B.

There must be something about the Tampa Bay area - the last time I know of - there was a couple that pushed to get the strip kits reproduced. {Jessie & ?? in the Suncoast Z Club}. If that is the same software/company - the Kits worked out well. People hate to buy things - sight unseen. Can that company print out a picture of the strips in that Kit? If so it might help you sell more. FWIW, Carl B.

Wow - Looking at the pictures Kurbycar32 linked to - the early 260Z heater is quite different. Instead of the end of the heater box coming off as in 70-73 - - the 260Z heater box splits in half. Anyway you look at it - replacing the heater core is one of the Less Fun jobs on either of these Z Cars. FWIW, Carl B.

What does he have - that you need? Carl B.

PM Sent Carl B.

Hi Julio: Man - that is a lot of work and it looks like you have done a very nice job for her. She has to be very pleased to see her Z looking like new again. FWIW, Carl B.

What all have you done to it - and what remains? The pictures look great.. FWIW, Carl B.

Hi Captain: I can't find the radio in any of the wiring diagrams I've looked at so far. The service, removal & installation of the radio and speaker - is covered in a Supplemental Chassis Manual. Even then, the wiring diagrams in that Manual still don't show the radio or speaker. Nor is there a list of the wire color codes for the radio. FWIW, Carl B.

Hi Dan, I think there is still a confusion here. Jerry and I have NOS Nissan CARTRIDGES, The Original Rebuildable Shocks {or inserts} are: 56110-E4126 ASSY-SHOCK ABSORBER - FRONT The Original Replacement Cartridge Shocks are: 56105-E4125 CARTRIDGE SHOCK ABSORBER FRONT No Seal Kit is needed when you use the Cartridges. The seals in the cartridges are self contained. Just like all the modern replacement shocks for Strut type suspensions. I don't have a good picture of the original rebuildable type shocks that came in the early 240Z's. I do have a picture of the rebuildable Nissan Competition Rally shocks - so maybe that will make things a little more clear. On the top is an after-market Cartridge Type, the rebuildable shock absorber assembly is in the middle and the original Nissan Cartridge Type shock is on the bottom. FWIW, Carl B.

HI Dan: Not to be nit-picky - - but to avoid confusion of terms - among anyone following this Thread. The Shock Absorbers contained within the Strut Tube - are Re-Buildable. That is what you use the NOS Seal Kits for. The "Cartridge Type Shock Absorbers" are NOT re-buildable. You just replace them. The Shock Absorbers contained within the Strut Tube, use oil contained within the Strut Tube to absorb shock. The Cartridge Type Shock Absorbers use oil contained within the Cartridge to absorb the shock - plus oil contained within the Strut Tube surrounding the Cartridge - to transfer heat from the Cartridge to the Strut Tube - then to the atmosphere. I have 2 NOS 56105- E4125 Cartridges- priced at $75.00 each plus shipping, get two rears from Jerry and someone would have a complete set. Hey - who knows what they would bring on EBay - FWIW, Carl B.

Great Story Zedyone_kenobi - I can sympathize as I had done pretty much the same at one point or another. For the past decade or so - I've uses NISSAN's Spark Plug Wires. They fit and they are Black - FWIW, Carl B.

Hi Captain: The colors I Posted - are the colors of the wires coming out the back of the different radios. I used the ZD from 74 to replace my 72 ZC. Had to swap the mounting brackets on the sides of the radios, then swap the face plates. I just took the 5 wires out of the 6 Pin Connector on the ZD - Put the Blue and Two Whites into the three pin connector needed for 72 ZC. Then screwed the black wire to the dash metal where the rear of the radio mounts. The Red wire then plugged into the same place as the original radio. Yes - the 72 ZC is mounted to the dash metal, which is bolted directly to the Firewall. So "if" one has a good body ground - the radio is grounded. I would see that adding a direct ground though the wiring harness would be an improvement, but screwing it to the same dash metal works just as well as it did for 72. I think the bottom line is that it is possible to use any of these newer model radio's in an older Z, as long as you have the mounting brackets and face plate from the older Z. I'll try to add some pictures of the radio's and the radio wiring to this thread. That and the info you provided should answer most questions in the future about these swaps. Thanks for taking the time to look the info. up... FWIW, Carl B.

Good to hear - hope you enjoyed the few weeks you had off.

Non-stock, very nice project car -- $5K to $6K. If you are lucky enough to find a cash buyer that happens to love everything you have done - $7.5K. A lot depends on advertising it far and often - then answering the phone when people call - and showing it when they want. It really is a buyers market - and if you don't respond - the next seller they call will. FWIW, Carl B.

With more Datsun 240Z's being exported from the US to Europe now, there will be an increased demand for the Euro Spec Tail Lights. They are required and some countries will not give a waver, so they have to be swapped into former US Spec. Z's. The last couple pairs I saw in like condition went for $1200.00 or above. Shipping from Sweden would most likely be less than from the US. FWIW, Carl B.

Thanks - Carl B.

Really ? - no one knows what that green wire on the 280Z radio is for? FWIW, Carl B.

We had a 1200 Fastback in 72/73. Great little car.. loved it. If that one was close to me I'd be there checking it out. Carl B.

Thanks Jerry: When I bought my first 240Z in March of 1970 - there were several 410/411 Station Wagons in the Spokane, Washington area. They were built like tanks.. very sold body, but way underpowered for the U.S. market. When the 510's came out they were almost the complete opposite - light weight bodies with very peppy engines.. a smash hit. Great to see that a few 410/411's have been saved Personally - I think the mid 70's 610 Station Wagons were actually the "Best Of Breed" among the Datsun Station Wagons - but they never really enjoyed the popularity that the 510's did. FWIW, Carl B.

See: http://www.classiczcars.com/forums/thread28467.html

This is kind of a sanity or fact check. I have, I believe a 260Z Radio that I want to swap into a 240Z. Has anyone used a later 260Z AM/FM radio - to replace an earlier 1972 Radio? I am looking at a AM/FM Radio for a 1972 240Z - and AM/FM Radios from I believe a 260Z & 280Z.??? 1972 Radio Model Number: KM-1520-ZC 1974/75 Radio Model Number: KM-15020-ZD 1976 Radio Model Number: KM-1520-ZE While they have slightly different mounting brackets screwed to the sides { they are screw-on interchangeable} - the Radios look very much the same in terms of exterior dimensions. The Face Plates are a different shape for the different dash styles, but again they can be swapped between all these radios as will. Wiring harness "SEEM" to be ABOUT the same - The 72 KM-1520-ZC has 4 wires: A Three Plug connector with a Blue Fused Wire, Gray Wire and Gray with Blue strip. A Red wire with male bullet connector The 74? KM-1520ZD had 5 wires A Six Plug connector with 5 Wires A Red Wire, Fused Blue Wire, White Wire and White with Blue strip, Black Wire The 75/76??? KM-1520-ZE has 6 wires: A Six Plug connector with 6 wires. A Blue Fused Wire, A Red Wire, A Black Wire, A Green Wire with White Strip, White Wire, White Wire with Black Strip. So... Blue with Fuse is the main power feed. Gray [or white} Wire and Gray {or white} With Blue Strip is the Speaker Red - Radio Light ? The extra Black wire on the ZD is a ground??? The Black Wire on the ZE - is actually screwed to the outside of the metal case. The Additional Green Wire with White Strip is ???? Are the above guesses correct or not? What is the additional Green Wire for on the ZE? Thanks, Carl B.

Hi Jerry: Do you have any more pictures of the Red 410 or 411 Stationwagon? Also I love that STOCK 510 4Door... FWIW, Carl B.

I think most people that want an original 5spd. shift knob - want an accurate reproduction of the original plastic shift map. The "Cloisonne" technique would not fill that bill. FWIW, Carl B.

The Reproduction on E-Bay has a Red "R" - the original I have use a White "R" FWIW, Carl B.

That's Amazing!! Who still rides motorcycles - your Fiance or Mary McGee? Your Fiance should do an interview with Mary for publication in Nissan Sport Mag. It would be interesting to see how her career evolved over the past 45 years. FWIW, Carl B.