TomoHawk

IMO, it's not -THE- 240Z, the first of the famous Z cars, and it's not a 280Z, the one with the biggest engine of the series. It's in-between the two more notable S30 models, so it doesn't get noticed, along with the other things mentioned. fwiw

Those air dams really seem to simplify the lamp mounting. I'm going to ru outto the JY soon to see if I can get a pair of Mustang or Fusion fog lamps. I know their in those ugly plastic boxes, but cheap is cheap.

Here's an idea for the headlight harness- It seems you could use it to operate a set of fog lamps or driving lamps? It would probably simplify the wiring a lot, as I don't think I can get any more 12 gauge wires through my firewall grommet. :classic:

Aircraft are required to operate on the 72 MHz frequencies. You probably made a type there. I'm still using 75 MHZ as it's just fine for my stuff.

That was exactly the first I had to do when I got my car.

Would anything change if you only replaced the rear springs, dampers, and bushings? I think it would line up the back wheels better than before, but there really isn't anything to adjust in the back. thxZ

The best thing would be to get Datsun to make all-new wiring harnesses using the latest wire

Yeah, Steve's topic.

It's Sarah's topic. She has control on the direction it goes. Olzed- I'm not surprised at how people like the real classics, even when there are other (fancy) cars around. We have a "cars & coffee" event here on Saturdays, and the last time I was there, I saw 8 or so Ferraris, a few Lotuses (Lotii?) and a few other big-dollar sportscars (Porsche, Mercedes, etc.) hese are all new or newer cars. There were just as may people visiting the S30s as were there by the Ferraris. Maybe people just walked by ALL the cars, but at least the older people seemed to spend a little more time by the S30s and newer Z cars. I should've taken my digital recorder, because some of the stories were really surprising!

Has anyone considered any of the domestic styles of lamps? The newer Mustangs and others have a fog/driving lamp that is long and narrow. Aside from the peculiar way it's mounted (to the Mustang's lower bodywork,) it looks like it might work under the bumper on an S30. If I knew how to remove one easily, I might try to get one from a JY and see if I could make a mounting bracket with some adjusters.

Autozone and other places list them, but I have not had a change to look at them personally yet.

Welcome. I've been involved with R/C for about 20 years, but my stuff is all on 75 MHZ

Yeah, I really do get it, madkaw. Young people nowadays have lost the ability to make a useful statement about anything, in proper English, or even in complete sentences. That is, without using the work 'like,' incorrectly, several times or a LOT of urban slang.

I remember the vacuum advance dashpots on the distributors for older (muscle) cars moved easily if you sucked on the hose, unlike the stock L28. OTOH, I'm thinking now that an oil-filled one for the throttle might be so good as as it would probably give resistance in both directions. I was trying to figure out how to get the BCDD off but it looks impossible to get your hand up there to reach the screws. You could still cover it and maybe screw in a few nipples for vacuum taps?

Cars don't or can't get sick. If it was "sick" then it should've been in the shop a looong time ago for a major overhaul or rebuild.

Many Carburetors used a dashpot for the same reason. There are also oil-filled thingies that operate like the dashpot, and look like a little shock absorber.

Could you replace the plastic handle with something if you needed to? I haven't been to the JY lately, but it sounds reasonable if you could remove or cut the grip part off a JY car and put it on the Z. The only other thing I can think of right now is to wrap the Z grip with leather or something, like twine. This could be a good one for a tech article, with some more details and photos.

I will finally get mine back on the road after stripping the undercoating off and primer/painting it all satin black, all the way up to about the firewall. The gas tank is repainted and relined. I didn't have time or funds to re-chrome the rear bumper. It will probably come off in a year or so anyway.

Thje Atlantic Z tech site has a good write up on how to do the rear bearings. After I TOLD the shop guy to read the booklet I put on the car seat, he tried to un-peen the nut and just turn it off with a big long wrench. Then I got a call to look at it because ALL THE THREADS WERE GONE. Apparently it wasn't the guy's fault because he did what his book said to do, and nevermind the customer's specific orders. Does the nut itself usually tear all the threads off? Then the shop manager told ME to go buy a new stub axle... $300 IIRC

For the 2008 convention, you could type in a nickname when you registered, that you wanted to get on your nametag, so you could get on your CZCC username or anything else on there. Otherwise, your local officeMax or pharmacy store has nametag products, or just grab the DUCT TAPE! HAHA I still have the little flashing guitar nametag from 2008. I just replace the nametag insert and install some new batteries. Cozye- A "extra" fee for non-entrants? That's odd. the Entry fee (includes) the cost for the opening & closing parties/banquets, so if you are a spectator, a small fee is appropriate for those few things. OTOH- All you really need to take your car to the convention is the driver seat, right? Start there, and see how much else you can get, like the bumpers and all the carpeting ('beauty panels' are optional!) Good luck!

I have a few cans of BBQ black paint....

Do you have any information on the weight? It looks a lot like a good paint job, which is what I did to all the same parts on my car, recently.

Here is a photo of the slot.

I figured it was just a way to keep the muffler cool, but there might be another reason.

On my '78, I found a horizontal slot, about 30x120mm, on the lower back panel above the exhaust tip. It's behind the bumper, so I never noticed it until the bumper was removed. Does anyone know what it's for? thxZ